[PATCHv2] i2c: adds support for i2c bus on Freescale CPM1/CPM2 controllers

[Jean Delvare]

On Thu, 29 May 2008 17:52:26 +0200, Jean Delvare wrote:
> On Wed, 21 May 2008 18:39:42 +0200, Jochen Friedrich wrote:
> > This driver uses the port of 2.4 code from Vitaly Bordug
> > <vitb at kernel.crashing.org> and the actual algorithm used by the i2c
> > driver of the DBox code on cvs.tuxboc.org from Felix Domke
> > (tmbinc at gmx.net) and Gillem (htoa at gmx.net) converted to an
> > of_platform_driver. Tested on CPM1 (MPC823 on dbox2 hardware) and
> > CPM2 (MPC8272).
> > 
> > Signed-off-by: Jochen Friedrich <jochen at scram.de>
> > ---
> >  drivers/i2c/busses/Kconfig   |   10 +
> >  drivers/i2c/busses/Makefile  |    1 +
> >  drivers/i2c/busses/i2c-cpm.c |  745 ++++++++++++++++++++++++++++++++++++++++++
> >  3 files changed, 756 insertions(+), 0 deletions(-)
> >  create mode 100644 drivers/i2c/busses/i2c-cpm.c
> > 
> > Changes since last version:
> > - change bus-frequency -> clock-frequency to comply to OF standard.
> > 
> 
> Applied, thanks. And thanks a lot to Wolfram for the review :)

Oh, I almost forgot: Jochen, would you like to be the maintainer for
this new driver? If you do, please send a patch adding yourself to
MAINTAINERS. Having dedicated driver maintainers makes my subsystem
maintainer's job easier.

Thanks,
-- 
Jean Delvare