[PATCH 4/7] [POWERPC] QE: implement support for the GPIO LIB API
Anton Vorontsov
avorontsov at ru.mvista.com
Sat May 24 02:39:00 EST 2008
This is needed to access QE GPIOs via Linux GPIO API.
Signed-off-by: Anton Vorontsov <avorontsov at ru.mvista.com>
Acked-By: Timur Tabi <timur at freescale.com>
---
Documentation/powerpc/booting-without-of.txt | 27 +++++
arch/powerpc/sysdev/qe_lib/Kconfig | 9 ++
arch/powerpc/sysdev/qe_lib/Makefile | 1 +
arch/powerpc/sysdev/qe_lib/gpio.c | 148 ++++++++++++++++++++++++++
include/asm-powerpc/qe.h | 2 +
5 files changed, 187 insertions(+), 0 deletions(-)
create mode 100644 arch/powerpc/sysdev/qe_lib/gpio.c
diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt
index 7c01730..1ad903a 100644
--- a/Documentation/powerpc/booting-without-of.txt
+++ b/Documentation/powerpc/booting-without-of.txt
@@ -1739,6 +1739,33 @@ platforms are moved over to use the flattened-device-tree model.
......
};
+ Note that "par_io" nodes are obsolete, and should not be used for
+ the new device trees. Instead, each Par I/O bank should be represented
+ via its own gpio-controller node:
+
+ Required properties:
+ - #gpio-cells : should be "2".
+ - compatible : should be "fsl,<chip>-qe-pario-bank",
+ "fsl,mpc8323-qe-pario-bank".
+ - reg : offset to the register set and its length.
+ - gpio-controller : node to identify gpio controllers.
+
+ Example:
+ qe_pio_a: gpio-controller at 1400 {
+ #gpio-cells = <2>;
+ compatible = "fsl,mpc8360-qe-pario-bank",
+ "fsl,mpc8323-qe-pario-bank";
+ reg = <0x1400 0x18>;
+ gpio-controller;
+ };
+
+ qe_pio_e: gpio-controller at 1460 {
+ #gpio-cells = <2>;
+ compatible = "fsl,mpc8360-qe-pario-bank",
+ "fsl,mpc8323-qe-pario-bank";
+ reg = <0x1460 0x18>;
+ gpio-controller;
+ };
vi) Pin configuration nodes
diff --git a/arch/powerpc/sysdev/qe_lib/Kconfig b/arch/powerpc/sysdev/qe_lib/Kconfig
index 76ffbc4..4bb18f5 100644
--- a/arch/powerpc/sysdev/qe_lib/Kconfig
+++ b/arch/powerpc/sysdev/qe_lib/Kconfig
@@ -24,3 +24,12 @@ config QE_USB
bool
help
QE USB Host Controller support
+
+config QE_GPIO
+ bool "QE GPIO support"
+ depends on QUICC_ENGINE
+ select GENERIC_GPIO
+ select HAVE_GPIO_LIB
+ help
+ Say Y here if you're going to use hardware that connects to the
+ QE GPIOs.
diff --git a/arch/powerpc/sysdev/qe_lib/Makefile b/arch/powerpc/sysdev/qe_lib/Makefile
index e9ff888..f1855c1 100644
--- a/arch/powerpc/sysdev/qe_lib/Makefile
+++ b/arch/powerpc/sysdev/qe_lib/Makefile
@@ -7,3 +7,4 @@ obj-$(CONFIG_UCC) += ucc.o
obj-$(CONFIG_UCC_SLOW) += ucc_slow.o
obj-$(CONFIG_UCC_FAST) += ucc_fast.o
obj-$(CONFIG_QE_USB) += usb.o
+obj-$(CONFIG_QE_GPIO) += gpio.o
diff --git a/arch/powerpc/sysdev/qe_lib/gpio.c b/arch/powerpc/sysdev/qe_lib/gpio.c
new file mode 100644
index 0000000..714be86
--- /dev/null
+++ b/arch/powerpc/sysdev/qe_lib/gpio.c
@@ -0,0 +1,148 @@
+/*
+ * QUICC Engine GPIOs
+ *
+ * Copyright (c) MontaVista Software, Inc. 2008.
+ *
+ * Author: Anton Vorontsov <avorontsov at ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/gpio.h>
+#include <asm/qe.h>
+
+struct qe_gpio_chip {
+ struct of_mm_gpio_chip mm_gc;
+ spinlock_t lock;
+
+ /* shadowed data register to clear/set bits safely */
+ u32 cpdata;
+};
+
+static inline struct qe_gpio_chip *
+to_qe_gpio_chip(struct of_mm_gpio_chip *mm_gc)
+{
+ return container_of(mm_gc, struct qe_gpio_chip, mm_gc);
+}
+
+static void qe_gpio_save_regs(struct of_mm_gpio_chip *mm_gc)
+{
+ struct qe_gpio_chip *qe_gc = to_qe_gpio_chip(mm_gc);
+ struct qe_pio_regs __iomem *regs = mm_gc->regs;
+
+ qe_gc->cpdata = in_be32(®s->cpdata);
+}
+
+static int qe_gpio_get(struct gpio_chip *gc, unsigned int gpio)
+{
+ struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+ struct qe_pio_regs __iomem *regs = mm_gc->regs;
+ u32 pin_mask = 1 << (QE_PIO_PINS - 1 - gpio);
+
+ return in_be32(®s->cpdata) & pin_mask;
+}
+
+static void qe_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+ struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+ struct qe_gpio_chip *qe_gc = to_qe_gpio_chip(mm_gc);
+ struct qe_pio_regs __iomem *regs = mm_gc->regs;
+ unsigned long flags;
+ u32 pin_mask = 1 << (QE_PIO_PINS - 1 - gpio);
+
+ spin_lock_irqsave(&qe_gc->lock, flags);
+
+ if (val)
+ qe_gc->cpdata |= pin_mask;
+ else
+ qe_gc->cpdata &= ~pin_mask;
+
+ out_be32(®s->cpdata, qe_gc->cpdata);
+
+ spin_unlock_irqrestore(&qe_gc->lock, flags);
+}
+
+static int qe_gpio_dir_in(struct gpio_chip *gc, unsigned int gpio)
+{
+ struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+ struct qe_gpio_chip *qe_gc = to_qe_gpio_chip(mm_gc);
+ unsigned long flags;
+
+ spin_lock_irqsave(&qe_gc->lock, flags);
+
+ __par_io_config_pin(mm_gc->regs, gpio, QE_PIO_DIR_IN, 0, 0, 0);
+
+ spin_unlock_irqrestore(&qe_gc->lock, flags);
+
+ return 0;
+}
+
+static int qe_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+ struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+ struct qe_gpio_chip *qe_gc = to_qe_gpio_chip(mm_gc);
+ unsigned long flags;
+
+ spin_lock_irqsave(&qe_gc->lock, flags);
+
+ __par_io_config_pin(mm_gc->regs, gpio, QE_PIO_DIR_OUT, 0, 0, 0);
+
+ spin_unlock_irqrestore(&qe_gc->lock, flags);
+
+ qe_gpio_set(gc, gpio, val);
+
+ return 0;
+}
+
+static int __init qe_add_gpiochips(void)
+{
+ struct device_node *np;
+
+ for_each_compatible_node(np, NULL, "fsl,mpc8323-qe-pario-bank") {
+ int ret;
+ struct qe_gpio_chip *qe_gc;
+ struct of_mm_gpio_chip *mm_gc;
+ struct of_gpio_chip *of_gc;
+ struct gpio_chip *gc;
+
+ qe_gc = kzalloc(sizeof(*qe_gc), GFP_KERNEL);
+ if (!qe_gc) {
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ spin_lock_init(&qe_gc->lock);
+
+ mm_gc = &qe_gc->mm_gc;
+ of_gc = &mm_gc->of_gc;
+ gc = &of_gc->gc;
+
+ mm_gc->save_regs = qe_gpio_save_regs;
+ of_gc->gpio_cells = 2;
+ gc->ngpio = QE_PIO_PINS;
+ gc->direction_input = qe_gpio_dir_in;
+ gc->direction_output = qe_gpio_dir_out;
+ gc->get = qe_gpio_get;
+ gc->set = qe_gpio_set;
+
+ ret = of_mm_gpiochip_add(np, mm_gc);
+ if (ret)
+ goto err;
+ continue;
+err:
+ pr_err("%s: registration failed with status %d\n",
+ np->full_name, ret);
+ kfree(qe_gc);
+ /* try others anyway */
+ }
+ return 0;
+}
+arch_initcall(qe_add_gpiochips);
diff --git a/include/asm-powerpc/qe.h b/include/asm-powerpc/qe.h
index c4523ac..832f3c8 100644
--- a/include/asm-powerpc/qe.h
+++ b/include/asm-powerpc/qe.h
@@ -102,6 +102,8 @@ struct qe_pio_regs {
extern int par_io_init(struct device_node *np);
extern int par_io_of_config(struct device_node *np);
+#define QE_PIO_DIR_IN 2
+#define QE_PIO_DIR_OUT 1
extern void __par_io_config_pin(struct qe_pio_regs __iomem *par_io, u8 pin,
int dir, int open_drain, int assignment,
int has_irq);
--
1.5.5.1
More information about the Linuxppc-dev
mailing list