[PATCH] [POWERPC] booting-without-of: fix GPIO section mis-numbering

[Anton Vorontsov]

"Specifying GPIO information for devices" should be IX-th section,
not VIII-th.

Thanks to David Brownell for noticing.

Signed-off-by: Anton Vorontsov <avorontsov at ru.mvista.com>
---
 Documentation/powerpc/booting-without-of.txt |    6 +++---
 1 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt
index 1d2a772..0f83d43 100644
--- a/Documentation/powerpc/booting-without-of.txt
+++ b/Documentation/powerpc/booting-without-of.txt
@@ -88,7 +88,7 @@ Table of Contents
     3) OpenPIC Interrupt Controllers
     4) ISA Interrupt Controllers
 
-  VIII - Specifying GPIO information for devices
+  IX - Specifying GPIO information for devices
     1) gpios property
     2) gpio-controller nodes
 
@@ -3477,8 +3477,8 @@ encodings listed below:
 	2 =  high to low edge sensitive type enabled
 	3 =  low to high edge sensitive type enabled
 
-VIII - Specifying GPIO information for devices
-==============================================
+IX - Specifying GPIO information for devices
+============================================
 
 1) gpios property
 -----------------
-- 
1.5.5.1