[PATCH 1/4 V5] booting-without-of for Freescale MSI
Jason Jin
Jason.jin at freescale.com
Fri May 23 18:32:45 EST 2008
Binding document adding for Freescale MSI support.
Signed-off-by: Jason Jin <Jason.jin at freescale.com>
---
In this version:
The example node changed due to the hwirq num change of MSI.
Documentation/powerpc/booting-without-of.txt | 43 +++++++++++++++++++++++++-
1 files changed, 42 insertions(+), 1 deletions(-)
diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt
index 1d2a772..c67d2f5 100644
--- a/Documentation/powerpc/booting-without-of.txt
+++ b/Documentation/powerpc/booting-without-of.txt
@@ -57,7 +57,10 @@ Table of Contents
n) 4xx/Axon EMAC ethernet nodes
o) Xilinx IP cores
p) Freescale Synchronous Serial Interface
- q) USB EHCI controllers
+ q) USB EHCI controllers
+ r) Freescale Display Interface Unit
+ s) Freescale on board FPGA
+ t) Freescael MSI interrupt controller
VII - Marvell Discovery mv64[345]6x System Controller chips
1) The /system-controller node
@@ -2870,6 +2873,44 @@ platforms are moved over to use the flattened-device-tree model.
reg = <0xe8000000 32>;
};
+ t) Freescale MSI interrupt controller
+
+ Reguired properities:
+ - compatible : compatible list, contains 2 entries,
+ first is "fsl,CHIP-msi", where CHIP is the processor(mpc8610, mpc8572,
+ etc.) and the second is "fsl,mpic-msi" or "fsl,ipic-msi" depending on
+ the parent type.
+ - reg : should contain the address and the length of the shared message
+ interrupt register set.
+ - msi-available-ranges: use <start count> style section to define which
+ msi interrupt can be used in the 256 msi interrupts. This property is
+ optional, without this, all the 256 MSI interrupts can be used.
+ - interrupts : each one of the interrupts here is one entry per 32 MSIs,
+ and routed to the host interrupt controller. the interrupts should
+ be set as edge sensitive.
+ - interrupt-parent: the phandle for the interrupt controller
+ that services interrupts for this device. for 83xx cpu, the interrupts
+ are routed to IPIC, and for 85xx/86xx cpu the interrupts are routed
+ to MPIC.
+
+ Example
+ msi at 41600 {
+ compatible = "fsl,mpc8610-msi", "fsl,mpic-msi";
+ reg = <0x41600 0x80>;
+ msi-available-ranges = <0 0x100>;
+ interrupts = <
+ 0xe0 0
+ 0xe1 0
+ 0xe2 0
+ 0xe3 0
+ 0xe4 0
+ 0xe5 0
+ 0xe6 0
+ 0xe7 0>;
+ interrupt-parent = <&mpic>;
+ };
+
+
VII - Marvell Discovery mv64[345]6x System Controller chips
===========================================================
--
1.5.4
More information about the Linuxppc-dev
mailing list