[PATCH 1/2] mmc: add support for card-detection polling
Anton Vorontsov
avorontsov at ru.mvista.com
Thu May 22 04:47:50 EST 2008
Some hosts (and boards that use mmc_spi) do not use interrupts on the CD
line, so they can't trigger mmc_detect_change. We want to poll the card
and see if there was a change. 1 second poll interval seems resonable.
This patch also implements .get_cd() host operation, that could be used
by the hosts that are able to report card-detect status without need to
talk MMC.
Signed-off-by: Anton Vorontsov <avorontsov at ru.mvista.com>
---
drivers/mmc/core/core.c | 19 ++++++++++++++++---
include/linux/mmc/host.h | 3 +++
2 files changed, 19 insertions(+), 3 deletions(-)
diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index 01ced4c..e455ebd 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -631,6 +631,16 @@ void mmc_rescan(struct work_struct *work)
mmc_bus_get(host);
+ if (host->ops->get_cd) {
+ int old_cd_status = host->cd_status;
+
+ host->cd_status = !!host->ops->get_cd(host);
+ if (!(old_cd_status ^ host->cd_status)) {
+ mmc_bus_put(host);
+ goto out;
+ }
+ }
+
if (host->bus_ops == NULL) {
/*
* Only we can add a new handler, so it's safe to
@@ -652,7 +662,7 @@ void mmc_rescan(struct work_struct *work)
if (!err) {
if (mmc_attach_sdio(host, ocr))
mmc_power_off(host);
- return;
+ goto out;
}
/*
@@ -662,7 +672,7 @@ void mmc_rescan(struct work_struct *work)
if (!err) {
if (mmc_attach_sd(host, ocr))
mmc_power_off(host);
- return;
+ goto out;
}
/*
@@ -672,7 +682,7 @@ void mmc_rescan(struct work_struct *work)
if (!err) {
if (mmc_attach_mmc(host, ocr))
mmc_power_off(host);
- return;
+ goto out;
}
mmc_release_host(host);
@@ -683,6 +693,9 @@ void mmc_rescan(struct work_struct *work)
mmc_bus_put(host);
}
+out:
+ if (host->caps & MMC_CAP_NEEDS_POLL)
+ mmc_schedule_delayed_work(&host->detect, HZ);
}
void mmc_start_host(struct mmc_host *host)
diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
index 7ab962f..05d03a4 100644
--- a/include/linux/mmc/host.h
+++ b/include/linux/mmc/host.h
@@ -53,6 +53,7 @@ struct mmc_host_ops {
void (*request)(struct mmc_host *host, struct mmc_request *req);
void (*set_ios)(struct mmc_host *host, struct mmc_ios *ios);
int (*get_ro)(struct mmc_host *host);
+ int (*get_cd)(struct mmc_host *host);
void (*enable_sdio_irq)(struct mmc_host *host, int enable);
};
@@ -94,6 +95,7 @@ struct mmc_host {
#define MMC_CAP_SD_HIGHSPEED (1 << 3) /* Can do SD high-speed timing */
#define MMC_CAP_SDIO_IRQ (1 << 4) /* Can signal pending SDIO IRQs */
#define MMC_CAP_SPI (1 << 5) /* Talks only SPI protocols */
+#define MMC_CAP_NEEDS_POLL (1 << 6) /* Needs polling for card-detection */
/* host specific block data */
unsigned int max_seg_size; /* see blk_queue_max_segment_size */
@@ -114,6 +116,7 @@ struct mmc_host {
unsigned int use_spi_crc:1;
unsigned int claimed:1; /* host exclusively claimed */
unsigned int bus_dead:1; /* bus has been released */
+ unsigned int cd_status:1; /* card-detect status */
#ifdef CONFIG_MMC_DEBUG
unsigned int removed:1; /* host is being removed */
#endif
--
1.5.5.1
More information about the Linuxppc-dev
mailing list