[PATCH 1/5 v4] powerpc: DTS file for the C2K
Remi Machet
rmachet at slac.stanford.edu
Wed May 21 03:30:24 EST 2008
Support for the C2K cPCI Single Board Computer from GEFanuc
(PowerPC MPC7448 with a Marvell MV64460 chipset)
All features of the board are not supported yet, but the board
boots, flash works, all Ethernet ports are working and PCI
devices are all found (USB and SATA on PCI1 do not work yet).
Part 1 of 5: DTS file describing the board peripherals. As far as I know
all peripherals except the FPGA are listed in there (I did not included
the FPGA because a lot of work is needed there).
Signed-off-by: Remi Machet <rmachet at slac.stanford.edu>
---
Changes:
v1: original patch
v2: cleaned up the file: removed i2c device_type, changed the name of
the cpu node and added aliases for the pci buses.
v3: removed the mdio entry because the PHY are handled by the Ethernet
driver on this board. Re-prganized the device controller entry to look
similar to other boards static buses (thanks to David Gibson for pointing
that out).
v4: reverted v3 changes because it was putting 2 reg attributes with the same
value in the ethernet-group group. Instead added a reg property to mdio.
c2k.dts | 371 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
1 files changed, 371 insertions(+)
diff --git a/arch/powerpc/boot/dts/c2k.dts b/arch/powerpc/boot/dts/c2k.dts
new file mode 100644
index 0000000..607686c
--- /dev/null
+++ b/arch/powerpc/boot/dts/c2k.dts
@@ -0,0 +1,371 @@
+/* Device Tree Source for GEFanuc C2K
+ *
+ * Author: Remi Machet <rmachet at slac.stanford.edu>
+ *
+ * Originated from prpmc2800.dts
+ *
+ * 2008 (c) Stanford University
+ * 2007 (c) MontaVista, Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ model = "C2K";
+ compatible = "GEFanuc,C2K";
+ coherency-off;
+
+ aliases {
+ pci0 = &PCI0;
+ pci1 = &PCI1;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu at 0 {
+ device_type = "cpu";
+ compatible = "PowerPC,7447";
+ reg = <0>;
+ clock-frequency = <996000000>; /* 996 MHz */
+ bus-frequency = <166666667>; /* 166.6666 MHz */
+ timebase-frequency = <41666667>; /* 166.6666/4 MHz */
+ i-cache-line-size = <32>;
+ d-cache-line-size = <32>;
+ i-cache-size = <32768>;
+ d-cache-size = <32768>;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x40000000>; /* 1GB */
+ };
+
+ system-controller at d8000000 { /* Marvell Discovery */
+ #address-cells = <1>;
+ #size-cells = <1>;
+ model = "mv64460";
+ compatible = "marvell,mv64360";
+ clock-frequency = <166666667>; /* 166.66... MHz */
+ reg = <0xd8000000 0x00010000>;
+ virtual-reg = <0xd8000000>;
+ ranges = <0xd4000000 0xd4000000 0x01000000 /* PCI 0 I/O Space */
+ 0x80000000 0x80000000 0x08000000 /* PCI 0 MEM Space */
+ 0xd0000000 0xd0000000 0x01000000 /* PCI 1 I/O Space */
+ 0xa0000000 0xa0000000 0x08000000 /* PCI 1 MEM Space */
+ 0xd8100000 0xd8100000 0x00010000 /* FPGA */
+ 0xd8110000 0xd8110000 0x00010000 /* FPGA USARTs */
+ 0xf8000000 0xf8000000 0x08000000 /* User FLASH */
+ 0x00000000 0xd8000000 0x00010000 /* Bridge's regs */
+ 0xd8140000 0xd8140000 0x00040000>; /* Integrated SRAM */
+
+ mdio at 2000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "marvell,mv64360-mdio";
+ reg = <0x2000 4>;
+ PHY0: ethernet-phy at 0 {
+ device_type = "ethernet-phy";
+ interrupts = <76>; /* GPP 12 */
+ interrupt-parent = <&PIC>;
+ reg = <0>;
+ };
+ PHY1: ethernet-phy at 1 {
+ device_type = "ethernet-phy";
+ interrupts = <76>; /* GPP 12 */
+ interrupt-parent = <&PIC>;
+ reg = <1>;
+ };
+ PHY2: ethernet-phy at 2 {
+ device_type = "ethernet-phy";
+ interrupts = <76>; /* GPP 12 */
+ interrupt-parent = <&PIC>;
+ reg = <2>;
+ };
+ };
+
+ ethernet-group at 2000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "marvell,mv64360-eth-group";
+ reg = <0x2000 0x2000>;
+ ethernet at 0 {
+ device_type = "network";
+ compatible = "marvell,mv64360-eth";
+ reg = <0>;
+ interrupts = <32>;
+ interrupt-parent = <&PIC>;
+ phy = <&PHY0>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ };
+ ethernet at 1 {
+ device_type = "network";
+ compatible = "marvell,mv64360-eth";
+ reg = <1>;
+ interrupts = <33>;
+ interrupt-parent = <&PIC>;
+ phy = <&PHY1>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ };
+ ethernet at 2 {
+ device_type = "network";
+ compatible = "marvell,mv64360-eth";
+ reg = <2>;
+ interrupts = <34>;
+ interrupt-parent = <&PIC>;
+ phy = <&PHY2>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ };
+ };
+
+ SDMA0: sdma at 4000 {
+ compatible = "marvell,mv64360-sdma";
+ reg = <0x4000 0xc18>;
+ virtual-reg = <0xd8004000>;
+ interrupt-base = <0>;
+ interrupts = <36>;
+ interrupt-parent = <&PIC>;
+ };
+
+ SDMA1: sdma at 6000 {
+ compatible = "marvell,mv64360-sdma";
+ reg = <0x6000 0xc18>;
+ virtual-reg = <0xd8006000>;
+ interrupt-base = <0>;
+ interrupts = <38>;
+ interrupt-parent = <&PIC>;
+ };
+
+ BRG0: brg at b200 {
+ compatible = "marvell,mv64360-brg";
+ reg = <0xb200 0x8>;
+ clock-src = <8>;
+ clock-frequency = <133333333>;
+ current-speed = <115200>;
+ };
+
+ BRG1: brg at b208 {
+ compatible = "marvell,mv64360-brg";
+ reg = <0xb208 0x8>;
+ clock-src = <8>;
+ clock-frequency = <133333333>;
+ current-speed = <115200>;
+ };
+
+ CUNIT: cunit at f200 {
+ reg = <0xf200 0x200>;
+ };
+
+ MPSCROUTING: mpscrouting at b400 {
+ reg = <0xb400 0xc>;
+ };
+
+ MPSCINTR: mpscintr at b800 {
+ reg = <0xb800 0x100>;
+ virtual-reg = <0xd800b800>;
+ };
+
+ MPSC0: mpsc at 8000 {
+ device_type = "serial";
+ compatible = "marvell,mv64360-mpsc";
+ reg = <0x8000 0x38>;
+ virtual-reg = <0xd8008000>;
+ sdma = <&SDMA0>;
+ brg = <&BRG0>;
+ cunit = <&CUNIT>;
+ mpscrouting = <&MPSCROUTING>;
+ mpscintr = <&MPSCINTR>;
+ cell-index = <0>;
+ interrupts = <40>;
+ interrupt-parent = <&PIC>;
+ };
+
+ MPSC1: mpsc at 9000 {
+ device_type = "serial";
+ compatible = "marvell,mv64360-mpsc";
+ reg = <0x9000 0x38>;
+ virtual-reg = <0xd8009000>;
+ sdma = <&SDMA1>;
+ brg = <&BRG1>;
+ cunit = <&CUNIT>;
+ mpscrouting = <&MPSCROUTING>;
+ mpscintr = <&MPSCINTR>;
+ cell-index = <1>;
+ interrupts = <42>;
+ interrupt-parent = <&PIC>;
+ };
+
+ wdt at b410 { /* watchdog timer */
+ compatible = "marvell,mv64360-wdt";
+ reg = <0xb410 0x8>;
+ };
+
+ i2c at c000 {
+ compatible = "marvell,mv64360-i2c";
+ reg = <0xc000 0x20>;
+ virtual-reg = <0xd800c000>;
+ interrupts = <37>;
+ interrupt-parent = <&PIC>;
+ };
+
+ PIC: pic {
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ compatible = "marvell,mv64360-pic";
+ reg = <0x0000 0x88>;
+ interrupt-controller;
+ };
+
+ mpp at f000 {
+ compatible = "marvell,mv64360-mpp";
+ reg = <0xf000 0x10>;
+ };
+
+ gpp at f100 {
+ compatible = "marvell,mv64360-gpp";
+ reg = <0xf100 0x20>;
+ };
+
+ PCI0: pci at 80000000 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ device_type = "pci";
+ compatible = "marvell,mv64360-pci";
+ reg = <0x0cf8 0x8>;
+ ranges = <0x01000000 0x0 0x00000000 0xd4000000 0x0 0x01000000
+ 0x02000000 0x0 0x80000000 0x80000000 0x0 0x08000000>;
+ bus-range = <0 255>;
+ clock-frequency = <66000000>;
+ interrupt-pci-iack = <0x0c34>;
+ interrupt-parent = <&PIC>;
+ interrupt-map-mask = <0x0000 0x0 0x0 0x7>;
+ interrupt-map = <
+ /* Only one interrupt line for PMC0 slot (INTA) */
+ 0x0000 0 0 1 &PIC 88
+ >;
+ };
+
+
+ PCI1: pci at a0000000 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ device_type = "pci";
+ compatible = "marvell,mv64360-pci";
+ reg = <0x0c78 0x8>;
+ ranges = <0x01000000 0x0 0x00000000 0xd0000000 0x0 0x01000000
+ 0x02000000 0x0 0x80000000 0xa0000000 0x0 0x08000000>;
+ bus-range = <0 255>;
+ clock-frequency = <66000000>;
+ interrupt-pci-iack = <0x0cb4>;
+ interrupt-parent = <&PIC>;
+ interrupt-map-mask = <0xf800 0x00 0x00 0x7>;
+ interrupt-map = <
+ /* IDSEL 0x01: PMC1 ? */
+ 0x0800 0 0 1 &PIC 88
+ /* IDSEL 0x02: cPCI bridge */
+ 0x1000 0 0 1 &PIC 88
+ /* IDSEL 0x03: USB controller */
+ 0x1800 0 0 1 &PIC 91
+ /* IDSEL 0x04: SATA controller */
+ 0x2000 0 0 1 &PIC 95
+ >;
+ };
+
+ cpu-error at 0070 {
+ compatible = "marvell,mv64360-cpu-error";
+ reg = <0x0070 0x10 0x0128 0x28>;
+ interrupts = <3>;
+ interrupt-parent = <&PIC>;
+ };
+
+ sram-ctrl at 0380 {
+ compatible = "marvell,mv64360-sram-ctrl";
+ reg = <0x0380 0x80>;
+ interrupts = <13>;
+ interrupt-parent = <&PIC>;
+ };
+
+ pci-error at 1d40 {
+ compatible = "marvell,mv64360-pci-error";
+ reg = <0x1d40 0x40 0x0c28 0x4>;
+ interrupts = <12>;
+ interrupt-parent = <&PIC>;
+ };
+
+ pci-error at 1dc0 {
+ compatible = "marvell,mv64360-pci-error";
+ reg = <0x1dc0 0x40 0x0ca8 0x4>;
+ interrupts = <16>;
+ interrupt-parent = <&PIC>;
+ };
+
+ mem-ctrl at 1400 {
+ compatible = "marvell,mv64360-mem-ctrl";
+ reg = <0x1400 0x60>;
+ interrupts = <17>;
+ interrupt-parent = <&PIC>;
+ };
+ /* Devices attached to the device controller */
+ devicebus at 045c {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "marvell,mv64306-devctrl";
+ reg = <0x45C 0x88>;
+ interrupts = <1>;
+ interrupt-parent = <&PIC>;
+ ranges = <0 0 0xd8100000 0x10000
+ 2 0 0xd8110000 0x10000
+ 4 0 0xf8000000 0x8000000>;
+ fpga at 0,0 {
+ compatible = "sbs,fpga-c2k";
+ reg = <0 0 0x10000>;
+ };
+ fpga_usart at 2,0 {
+ compatible = "sbs,fpga_usart-c2k";
+ reg = <2 0 0x10000>;
+ };
+ nor_flash at 4,0 {
+ compatible = "cfi-flash";
+ reg = <4 0 0x8000000>; /* 128MB */
+ bank-width = <4>;
+ device-width = <1>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ partition at 0 {
+ label = "boot";
+ reg = <0x00000000 0x00080000>;
+ };
+ partition at 40000 {
+ label = "kernel";
+ reg = <0x00080000 0x00400000>;
+ };
+ partition at 440000 {
+ label = "initrd";
+ reg = <0x00480000 0x00B80000>;
+ };
+ partition at 1000000 {
+ label = "rootfs";
+ reg = <0x01000000 0x06800000>;
+ };
+ partition at 7800000 {
+ label = "recovery";
+ reg = <0x07800000 0x00800000>;
+ read-only;
+ };
+ };
+ };
+ };
+ chosen {
+ linux,stdout-path = &MPSC0;
+ };
+};
More information about the Linuxppc-dev
mailing list