[PATCH 2/2] ftrace: support for PowerPC
Michael Ellerman
michael at ellerman.id.au
Wed May 21 00:04:37 EST 2008
On Wed, 2008-05-14 at 23:49 -0400, Steven Rostedt wrote:
> plain text document attachment (ftrace-powerpc-port.patch)
> This patch adds full support for ftrace for PowerPC (both 64 and 32 bit).
> This includes dynamic tracing and function filtering.
Hi Steven,
Just a few comments inline ..
> Index: linux-sched-devel.git/arch/powerpc/kernel/Makefile
> ===================================================================
> --- linux-sched-devel.git.orig/arch/powerpc/kernel/Makefile 2008-05-14 19:30:53.000000000 -0700
> +++ linux-sched-devel.git/arch/powerpc/kernel/Makefile 2008-05-14 19:31:56.000000000 -0700
> @@ -12,6 +12,18 @@ CFLAGS_prom_init.o += -fPIC
> CFLAGS_btext.o += -fPIC
> endif
>
> +ifdef CONFIG_FTRACE
> +# Do not trace early boot code
> +CFLAGS_REMOVE_cputable.o = -pg
> +CFLAGS_REMOVE_prom_init.o = -pg
Why do we not want to trace early boot? Just because it's not useful?
> Index: linux-sched-devel.git/arch/powerpc/kernel/entry_32.S
> ===================================================================
> --- linux-sched-devel.git.orig/arch/powerpc/kernel/entry_32.S 2008-05-14 19:30:50.000000000 -0700
> +++ linux-sched-devel.git/arch/powerpc/kernel/entry_32.S 2008-05-14 19:31:56.000000000 -0700
> @@ -1035,3 +1035,133 @@ machine_check_in_rtas:
> /* XXX load up BATs and panic */
>
.. snip
> +_GLOBAL(mcount)
> +_GLOBAL(_mcount)
> + stwu r1,-48(r1)
> + stw r3, 12(r1)
> + stw r4, 16(r1)
> + stw r5, 20(r1)
> + stw r6, 24(r1)
> + mflr r3
> + lwz r4, 52(r1)
> + mfcr r5
> + stw r7, 28(r1)
> + stw r8, 32(r1)
> + stw r9, 36(r1)
> + stw r10,40(r1)
> + stw r3, 44(r1)
> + stw r5, 8(r1)
> +
> + LOAD_REG_ADDR(r5, ftrace_trace_function)
> +#if 0
> + mtctr r3
> + mr r1, r5
> + bctrl
> +#endif
> + lwz r5,0(r5)
> +#if 1
> + mtctr r5
> + bctrl
> +#else
> + bl ftrace_stub
> +#endif
#if 0, #if 1 ?
> Index: linux-sched-devel.git/arch/powerpc/kernel/ftrace.c
> ===================================================================
> --- /dev/null 1970-01-01 00:00:00.000000000 +0000
> +++ linux-sched-devel.git/arch/powerpc/kernel/ftrace.c 2008-05-14 19:31:56.000000000 -0700
> @@ -0,0 +1,165 @@
> +/*
> + * Code for replacing ftrace calls with jumps.
> + *
> + * Copyright (C) 2007-2008 Steven Rostedt <srostedt at redhat.com>
> + *
> + * Thanks goes out to P.A. Semi, Inc for supplying me with a PPC64 box.
> + *
> + */
> +
> +#include <linux/spinlock.h>
> +#include <linux/hardirq.h>
> +#include <linux/ftrace.h>
> +#include <linux/percpu.h>
> +#include <linux/init.h>
> +#include <linux/list.h>
> +
> +#include <asm/cacheflush.h>
> +
> +#define CALL_BACK 4
I don't grok what you're doing with CALL_BACK, you add it in places and
subtract in others - and it looks like you could do neither, but I haven't
gone over it in detail.
> +static unsigned int ftrace_nop = 0x60000000;
I should really add a #define for that.
> +#ifdef CONFIG_PPC32
> +# define GET_ADDR(addr) addr
> +#else
> +/* PowerPC64's functions are data that points to the functions */
> +# define GET_ADDR(addr) *(unsigned long *)addr
> +#endif
And that.
.. snip
> +notrace unsigned char *ftrace_call_replace(unsigned long ip, unsigned long addr)
> +{
> + static unsigned int op;
> +
> + addr = GET_ADDR(addr);
> +
> + /* Set to "bl addr" */
> + op = 0x48000001 | (ftrace_calc_offset(ip, addr) & 0x03fffffe);
0x03fffffe should be 0x03fffffc, if you set bit 1 you'll end with a "bla" instruction,
ie. branch absolute and link. That shouldn't happen as long as ip and addr are
properly aligned, but still.
In fact I think you should just use create_function_call() or create_branch() from
include/asm-powerpc/system.h
> +#ifdef CONFIG_PPC64
> +# define _ASM_ALIGN " .align 3 "
> +# define _ASM_PTR " .llong "
> +#else
> +# define _ASM_ALIGN " .align 2 "
> +# define _ASM_PTR " .long "
> +#endif
We already have a #define for .long, it's called PPC_LONG (asm/asm-compat.h)
Perhaps we should add one for .align, PPC_LONG_ALIGN or something?
> +notrace int
> +ftrace_modify_code(unsigned long ip, unsigned char *old_code,
> + unsigned char *new_code)
> +{
> + unsigned replaced;
> + unsigned old = *(unsigned *)old_code;
> + unsigned new = *(unsigned *)new_code;
> + int faulted = 0;
> +
> + /* move the IP back to the start of the call */
> + ip -= CALL_BACK;
> +
> + /*
> + * Note: Due to modules and __init, code can
> + * disappear and change, we need to protect against faulting
> + * as well as code changing.
> + *
> + * No real locking needed, this code is run through
> + * kstop_machine.
> + */
> + asm volatile (
> + "1: lwz %1, 0(%2)\n"
> + " cmpw %1, %5\n"
> + " bne 2f\n"
> + " stwu %3, 0(%2)\n"
> + "2:\n"
> + ".section .fixup, \"ax\"\n"
> + "3: li %0, 1\n"
> + " b 2b\n"
> + ".previous\n"
> + ".section __ex_table,\"a\"\n"
> + _ASM_ALIGN "\n"
> + _ASM_PTR "1b, 3b\n"
> + ".previous"
Or perhaps we just need a macro for adding exception table entries.
> + : "=r"(faulted), "=r"(replaced)
> + : "r"(ip), "r"(new),
> + "0"(faulted), "r"(old)
> + : "memory");
> +
> + if (replaced != old && replaced != new)
> + faulted = 2;
> +
> + if (!faulted)
> + flush_icache_range(ip, ip + 8);
> +
> + return faulted;
> +}
> Index: linux-sched-devel.git/arch/powerpc/kernel/setup_32.c
> ===================================================================
> --- linux-sched-devel.git.orig/arch/powerpc/kernel/setup_32.c 2008-05-14 19:30:50.000000000 -0700
> +++ linux-sched-devel.git/arch/powerpc/kernel/setup_32.c 2008-05-14 19:31:56.000000000 -0700
> @@ -47,6 +47,11 @@
> #include <asm/kgdb.h>
> #endif
>
> +#ifdef CONFIG_FTRACE
> +extern void _mcount(void);
> +EXPORT_SYMBOL(_mcount);
> +#endif
Can you please put the extern in a header, and the EXPORT_SYMBOL in arch/powerpc/kernel/ftrace.c?
> Index: linux-sched-devel.git/arch/powerpc/kernel/setup_64.c
> ===================================================================
> --- linux-sched-devel.git.orig/arch/powerpc/kernel/setup_64.c 2008-05-14 19:30:50.000000000 -0700
> +++ linux-sched-devel.git/arch/powerpc/kernel/setup_64.c 2008-05-14 19:31:56.000000000 -0700
> @@ -85,6 +85,11 @@ struct ppc64_caches ppc64_caches = {
> };
> EXPORT_SYMBOL_GPL(ppc64_caches);
>
> +#ifdef CONFIG_FTRACE
> +extern void _mcount(void);
> +EXPORT_SYMBOL(_mcount);
> +#endif
Ditto.
cheers
--
Michael Ellerman
OzLabs, IBM Australia Development Lab
wwweb: http://michael.ellerman.id.au
phone: +61 2 6212 1183 (tie line 70 21183)
We do not inherit the earth from our ancestors,
we borrow it from our children. - S.M.A.R.T Person
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 189 bytes
Desc: This is a digitally signed message part
URL: <http://lists.ozlabs.org/pipermail/linuxppc-dev/attachments/20080521/db862850/attachment.pgp>
More information about the Linuxppc-dev
mailing list