[PATCH 2/5] powerpc: boot code for the C2K
Remi Machet
rmachet at slac.stanford.edu
Fri May 16 10:23:40 EST 2008
Support for the C2K cPCI Single Board Computer from GEFanuc
(PowerPC MPC7448 with a Marvell MV64460 chipset)
All features of the board are not supported yet, but the board
boots, flash works, all Ethernet ports are working and PCI
devices are all found (USB and SATA on PCI1 do not work yet).
Part 2 of 5: support for the board in arch/powerpc/boot.
Signed-off-by: Remi Machet <rmachet at slac.stanford.edu>
---
Makefile | 3
c2k.c | 238 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 240 insertions(+), 1 deletion(-)
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index 7822d25..232a9b3 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -63,7 +63,7 @@ src-plat := of.c cuboot-52xx.c cuboot-824x.c cuboot-83xx.c cuboot-85xx.c holly.c
ps3-head.S ps3-hvcall.S ps3.c treeboot-bamboo.c cuboot-8xx.c \
cuboot-pq2.c cuboot-sequoia.c treeboot-walnut.c \
cuboot-bamboo.c cuboot-mpc7448hpc2.c cuboot-taishan.c \
- fixed-head.S ep88xc.c ep405.c \
+ fixed-head.S ep88xc.c ep405.c c2k.c \
cuboot-katmai.c cuboot-rainier.c redboot-8xx.c ep8248e.c \
cuboot-warp.c cuboot-85xx-cpm2.c cuboot-yosemite.c simpleboot.c \
virtex405-head.S
@@ -197,6 +197,7 @@ image-$(CONFIG_PPC_HOLLY) += zImage.holly
image-$(CONFIG_PPC_PRPMC2800) += dtbImage.prpmc2800
image-$(CONFIG_PPC_ISERIES) += zImage.iseries
image-$(CONFIG_DEFAULT_UIMAGE) += uImage
+image-$(CONFIG_PPC_C2K) += dtbImage.c2k
#
# Targets which embed a device tree blob
diff --git a/arch/powerpc/boot/c2k.c b/arch/powerpc/boot/c2k.c
new file mode 100644
index 0000000..e0a587a
--- /dev/null
+++ b/arch/powerpc/boot/c2k.c
@@ -0,0 +1,238 @@
+/*
+ * GEFanuc C2K platform code.
+ *
+ * Author: Remi Machet <rmachet at slac.stanford.edu>
+ *
+ * Originated from prpmc2800.c
+ *
+ * 2008 (c) Stanford University
+ * 2007 (c) MontaVista, Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include "types.h"
+#include "stdio.h"
+#include "io.h"
+#include "ops.h"
+#include "elf.h"
+#include "gunzip_util.h"
+#include "mv64x60.h"
+
+#define KB 1024U
+#define MB (KB*KB)
+
+BSS_STACK(16*KB);
+
+static u8 *bridge_base;
+
+static void c2k_bridge_setup(u32 mem_size)
+{
+ u32 i, v[30], enables, acc_bits;
+ u32 pci_base_hi, pci_base_lo, size, buf[2];
+ unsigned long cpu_base;
+ int rc;
+ void *devp, *mv64x60_devp;
+ u8 *bridge_pbase, is_coherent;
+ struct mv64x60_cpu2pci_win *tbl;
+ int hose;
+
+ bridge_pbase = mv64x60_get_bridge_pbase();
+ is_coherent = mv64x60_is_coherent();
+
+ if (is_coherent)
+ acc_bits = MV64x60_PCI_ACC_CNTL_SNOOP_WB
+ | MV64x60_PCI_ACC_CNTL_SWAP_NONE
+ | MV64x60_PCI_ACC_CNTL_MBURST_32_BYTES
+ | MV64x60_PCI_ACC_CNTL_RDSIZE_32_BYTES;
+ else
+ acc_bits = MV64x60_PCI_ACC_CNTL_SNOOP_NONE
+ | MV64x60_PCI_ACC_CNTL_SWAP_NONE
+ | MV64x60_PCI_ACC_CNTL_MBURST_128_BYTES
+ | MV64x60_PCI_ACC_CNTL_RDSIZE_256_BYTES;
+
+ mv64x60_config_ctlr_windows(bridge_base, bridge_pbase, is_coherent);
+ mv64x60_devp = find_node_by_compatible(NULL, "marvell,mv64360");
+ if (mv64x60_devp == NULL)
+ fatal("Error: Missing marvell,mv64360 device tree node\n\r");
+
+ enables = in_le32((u32 *)(bridge_base + MV64x60_CPU_BAR_ENABLE));
+ enables |= 0x007ffe00; /* Disable all cpu->pci windows */
+ out_le32((u32 *)(bridge_base + MV64x60_CPU_BAR_ENABLE), enables);
+
+ /* Get the cpu -> pci i/o & mem mappings from the device tree */
+ devp = NULL;
+ while (1) {
+ devp = find_node_by_compatible(devp, "marvell,mv64360-pci");
+ if (devp == NULL)
+ break;
+
+ rc = getprop(devp, "cell-index", &hose, sizeof(hose));
+ if (rc != sizeof(hose))
+ hose = 0;
+
+ if (hose >= 2)
+ fatal("Error: Only 2 PCI controllers are supported at" \
+ " this time.\n");
+
+ mv64x60_config_pci_windows(bridge_base, bridge_pbase, hose, 0,
+ mem_size, acc_bits);
+
+ rc = getprop(devp, "ranges", v, sizeof(v));
+ if (rc == 0)
+ fatal("Error: Can't find marvell,mv64360-pci ranges"
+ " property\n\r");
+
+ /* Get the cpu -> pci i/o & mem mappings from the device tree */
+
+ for (i = 0; i < rc; i += 6) {
+ switch (v[i] & 0xff000000) {
+ case 0x01000000: /* PCI I/O Space */
+ tbl = mv64x60_cpu2pci_io;
+ break;
+ case 0x02000000: /* PCI MEM Space */
+ tbl = mv64x60_cpu2pci_mem;
+ break;
+ default:
+ continue;
+ }
+
+ pci_base_hi = v[i+1];
+ pci_base_lo = v[i+2];
+ cpu_base = v[i+3];
+ size = v[i+5];
+
+ buf[0] = cpu_base;
+ buf[1] = size;
+
+ if (!dt_xlate_addr(devp, buf, sizeof(buf), &cpu_base))
+ fatal("Error: Can't translate PCI address " \
+ "0x%x\n\r", (u32)cpu_base);
+
+ mv64x60_config_cpu2pci_window(bridge_base, hose,
+ pci_base_hi, pci_base_lo, cpu_base, size, tbl);
+ }
+
+ enables &= ~(3<<(9+hose*5)); /* Enable cpu->pci<hose> i/o,
+ cpu->pci<hose> mem0 */
+ out_le32((u32 *)(bridge_base + MV64x60_CPU_BAR_ENABLE),
+ enables);
+ };
+}
+
+static void c2k_fixups(void)
+{
+ u32 mem_size;
+
+ mem_size = mv64x60_get_mem_size(bridge_base);
+ c2k_bridge_setup(mem_size); /* Do necessary bridge setup */
+}
+
+#define MV64x60_MPP_CNTL_0 0xf000
+#define MV64x60_MPP_CNTL_2 0xf008
+#define MV64x60_GPP_IO_CNTL 0xf100
+#define MV64x60_GPP_LEVEL_CNTL 0xf110
+#define MV64x60_GPP_VALUE_SET 0xf118
+
+static void c2k_reset(void)
+{
+ u32 temp;
+
+ udelay(5000000);
+
+ if (bridge_base != 0) {
+ temp = in_le32((u32 *)(bridge_base + MV64x60_MPP_CNTL_0));
+ temp &= 0xFFFF0FFF;
+ out_le32((u32 *)(bridge_base + MV64x60_MPP_CNTL_0), temp);
+
+ temp = in_le32((u32 *)(bridge_base + MV64x60_GPP_LEVEL_CNTL));
+ temp |= 0x00000004;
+ out_le32((u32 *)(bridge_base + MV64x60_GPP_LEVEL_CNTL), temp);
+
+ temp = in_le32((u32 *)(bridge_base + MV64x60_GPP_IO_CNTL));
+ temp |= 0x00000004;
+ out_le32((u32 *)(bridge_base + MV64x60_GPP_IO_CNTL), temp);
+
+ temp = in_le32((u32 *)(bridge_base + MV64x60_MPP_CNTL_2));
+ temp &= 0xFFFF0FFF;
+ out_le32((u32 *)(bridge_base + MV64x60_MPP_CNTL_2), temp);
+
+ temp = in_le32((u32 *)(bridge_base + MV64x60_GPP_LEVEL_CNTL));
+ temp |= 0x00080000;
+ out_le32((u32 *)(bridge_base + MV64x60_GPP_LEVEL_CNTL), temp);
+
+ temp = in_le32((u32 *)(bridge_base + MV64x60_GPP_IO_CNTL));
+ temp |= 0x00080000;
+ out_le32((u32 *)(bridge_base + MV64x60_GPP_IO_CNTL), temp);
+
+ out_le32((u32 *)(bridge_base + MV64x60_GPP_VALUE_SET),
+ 0x00080004);
+ }
+
+ for (;;);
+}
+
+#define HEAP_SIZE (16*MB)
+static struct gunzip_state gzstate;
+
+void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
+ unsigned long r6, unsigned long r7)
+{
+ struct elf_info ei;
+ char *heap_start, *dtb;
+ int dt_size = _dtb_end - _dtb_start;
+ void *vmlinuz_addr = _vmlinux_start;
+ unsigned long vmlinuz_size = _vmlinux_end - _vmlinux_start;
+ char elfheader[256];
+
+ if (dt_size <= 0) /* No fdt */
+ exit();
+
+ /*
+ * Start heap after end of the kernel (after decompressed to
+ * address 0) or the end of the zImage, whichever is higher.
+ * That's so things allocated by simple_alloc won't overwrite
+ * any part of the zImage and the kernel won't overwrite the dtb
+ * when decompressed & relocated.
+ */
+ gunzip_start(&gzstate, vmlinuz_addr, vmlinuz_size);
+ gunzip_exactly(&gzstate, elfheader, sizeof(elfheader));
+
+ if (!parse_elf32(elfheader, &ei))
+ exit();
+
+ heap_start = (char *)(ei.memsize + ei.elfoffset); /* end of kernel*/
+ heap_start = max(heap_start, (char *)_end); /* end of zImage */
+
+ if ((unsigned)simple_alloc_init(heap_start, HEAP_SIZE, 2*KB, 16)
+ > (128*MB))
+ exit();
+
+ /* Relocate dtb to safe area past end of zImage & kernel */
+ dtb = malloc(dt_size);
+ if (!dtb)
+ exit();
+ memmove(dtb, _dtb_start, dt_size);
+ fdt_init(dtb);
+
+ bridge_base = mv64x60_get_bridge_base();
+
+ platform_ops.fixups = c2k_fixups;
+ platform_ops.exit = c2k_reset;
+
+ if (serial_console_init() < 0)
+ exit();
+}
+
+/* _zimage_start called very early--need to turn off external interrupts */
+asm (" .globl _zimage_start\n\
+ _zimage_start:\n\
+ mfmsr 10\n\
+ rlwinm 10,10,0,~(1<<15) /* Clear MSR_EE */\n\
+ sync\n\
+ mtmsr 10\n\
+ isync\n\
+ b _zimage_start_lib\n\
+");
More information about the Linuxppc-dev
mailing list