MPC5200b MMC over SPI into PSC6
rider4ever at gmail.com
Sat May 10 06:01:38 EST 2008
Nice to hear that, next week I'll try and let you know.
Thank you again for your support,
On Fri, May 9, 2008 at 5:20 PM, Grant Likely <grant.likely at secretlab.ca> wrote:
> On Fri, May 9, 2008 at 9:02 AM, Fabri <rider4ever at gmail.com> wrote:
>> Thanks for the patches, now some more rows are printed after RamDisk loading:
>> Verifying Checksum ... OK
>> Loading Ramdisk to 0fe68000, end 0ff49bf2 ... OK
>> Memory <- <0x0 0x10000000> (256MB)
>> CPU clock-frequency <- 0xbcd3d80 (198MHz)
>> CPU timebase-frequency <- 0x1f78a40 (33MHz)
>> CPU bus-frequency <- 0x7de2900 (132MHz)
>> zImage starting: loaded at 0x00400000 (sp: 0x0ff4a958)
>> Allocating 0x32d410 bytes for kernel ...
>> gunzipping (0x00000000 <- 0x0040d000:0x00730fd4)...done 0x30d150 bytes
>> Using loader supplied ramdisk at 0xfe68000-0xff49bf2
>> initrd head: 0x1f8b0808
>> Linux/PowerPC load:
> Doesn't look like you are passing a kernel parameters line. The
> kernel probably is booting, but doesn't know where to output the
> console. Try adding "console=ttyPSC0,115200".
> Grant Likely, B.Sc., P.Eng.
> Secret Lab Technologies Ltd.
More information about the Linuxppc-dev