[PATCH 3/3] [POWERPC] fsl_uli1575: change RTC quirk to work on MPC8610HPCD

[Anton Vorontsov]

Currently fsl_uli1575.c's RTC quirk reads at ->start, but I got the RTC
working on the MPC8610HPCD only when reading at 0xa0100000-0xafffffff,
i.e. memory outside of behind-the-bridge devices' assigned regions.

This patch wasn't tested on the MPC85xxDS and MPC8641HPCN boards, I
don't have any of these.

Signed-off-by: Anton Vorontsov <avorontsov at ru.mvista.com>
---
 arch/powerpc/platforms/86xx/mpc8610_hpcd.c |    1 +
 arch/powerpc/platforms/fsl_uli1575.c       |    2 +-
 2 files changed, 2 insertions(+), 1 deletions(-)

diff --git a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
index 2fa672b..71dbd9d 100644
--- a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
+++ b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
@@ -229,6 +229,7 @@ MACH_PCI_FIXUP_HEADER(mpc86xx_hpcd, PCI_VENDOR_ID_AL, 0x1575, hpcd_quirk_uli1575
 MACH_PCI_FIXUP_HEADER(mpc86xx_hpcd, PCI_VENDOR_ID_AL, 0x5288, hpcd_quirk_uli5288);
 MACH_PCI_FIXUP_HEADER(mpc86xx_hpcd, PCI_VENDOR_ID_AL, 0x5229, hpcd_quirk_uli5229);
 MACH_PCI_FIXUP_FINAL(mpc86xx_hpcd, PCI_VENDOR_ID_AL, 0x5288, hpcd_final_uli5288);
+MACH_PCI_FIXUP_FINAL(mpc86xx_hpcd, PCI_VENDOR_ID_AL, 0x5249, quirk_final_uli5249);
 #endif /* CONFIG_PCI */
 
 #if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE)
diff --git a/arch/powerpc/platforms/fsl_uli1575.c b/arch/powerpc/platforms/fsl_uli1575.c
index 63ea4eb..a1b400a 100644
--- a/arch/powerpc/platforms/fsl_uli1575.c
+++ b/arch/powerpc/platforms/fsl_uli1575.c
@@ -221,7 +221,7 @@ void __devinit quirk_final_uli5249(struct pci_dev *dev)
 	for (i = 0; i < PCI_BUS_NUM_RESOURCES; i++) {
 		if ((bus->resource[i]) &&
 			(bus->resource[i]->flags & IORESOURCE_MEM)) {
-			dummy = ioremap(bus->resource[i]->start, 0x4);
+			dummy = ioremap(bus->resource[i]->end - 3, 0x4);
 			if (dummy) {
 				in_8(dummy);
 				iounmap(dummy);
-- 
1.5.5.1