[PATCH 4/4] [POWERPC] Xilinx: Framebuffer: Use dcr infrastructure.
Stephen Neuendorffer
stephen.neuendorffer at xilinx.com
Tue May 6 03:56:41 EST 2008
This device contains a dcr interface. Previously, the dcr interface
was assumed to be used in mmio mode, and the register space of the dcr
interface was precomputed and stuffed in the device tree. This patch
makes use of the new dcr infrastructure to represent the dcr interface
as any other dcr interface in the device tree. This enables the dcr
interface to be connected directly to a native dcr interface in a
clean way.
In particular, the device tree expected looks like:
dcr_v29_0: dcr at 0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "xlnx,dcr-v29-1.00.a";
VGA_FrameBuffer: tft at 80 {
compatible = "xlnx,plb-tft-cntlr-ref-1.00.a";
dcr-parent = <&opb2dcr_bridge_0>;
dcr-reg = < 80 2 >;
xlnx,default-tft-base-addr = <7f>;
xlnx,dps-init = <1>;
xlnx,on-init = <1>;
xlnx,pixclk-is-busclk-divby4 = <1>;
} ;
} ;
opb2dcr_bridge_0: opb2dcr-bridge at 40700000 {
compatible = "xlnx,opb2dcr-bridge-1.00.b";
dcr-access-method = "mmio";
dcr-controller ;
dcr-mmio-range = < 40700000 1000 >;
dcr-mmio-stride = <4>;
reg = < 40700000 1000 >;
xlnx,family = "virtex2p";
} ;
Signed-off-by: Stephen Neuendorffer <stephen.neuendorffer at xilinx.com>
---
drivers/video/xilinxfb.c | 54 +++++++++++++++++-----------------------------
1 files changed, 20 insertions(+), 34 deletions(-)
diff --git a/drivers/video/xilinxfb.c b/drivers/video/xilinxfb.c
index 4d64402..848752e 100644
--- a/drivers/video/xilinxfb.c
+++ b/drivers/video/xilinxfb.c
@@ -37,6 +37,7 @@
#endif
#include <asm/io.h>
#include <linux/xilinxfb.h>
+#include <asm/dcr.h>
#define DRIVER_NAME "xilinxfb"
#define DRIVER_DESCRIPTION "Xilinx TFT LCD frame buffer driver"
@@ -111,8 +112,9 @@ struct xilinxfb_drvdata {
struct fb_info info; /* FB driver info record */
- u32 regs_phys; /* phys. address of the control registers */
- u32 __iomem *regs; /* virt. address of the control registers */
+ dcr_host_t dcr_host;
+ unsigned int dcr_start;
+ unsigned int dcr_len;
void *fb_virt; /* virt. address of the frame buffer */
dma_addr_t fb_phys; /* phys. address of the frame buffer */
@@ -135,7 +137,7 @@ struct xilinxfb_drvdata {
* when it's needed.
*/
#define xilinx_fb_out_be32(driverdata, offset, val) \
- out_be32(driverdata->regs + offset, val)
+ dcr_write(driverdata->dcr_host, offset, val)
static int
xilinx_fb_setcolreg(unsigned regno, unsigned red, unsigned green, unsigned blue,
@@ -203,7 +205,8 @@ static struct fb_ops xilinxfb_ops =
* Bus independent setup/teardown
*/
-static int xilinxfb_assign(struct device *dev, unsigned long physaddr,
+static int xilinxfb_assign(struct device *dev, dcr_host_t dcr_host,
+ unsigned int dcr_start, unsigned int dcr_len,
struct xilinxfb_platform_data *pdata)
{
struct xilinxfb_drvdata *drvdata;
@@ -218,21 +221,9 @@ static int xilinxfb_assign(struct device *dev, unsigned long physaddr,
}
dev_set_drvdata(dev, drvdata);
- /* Map the control registers in */
- if (!request_mem_region(physaddr, 8, DRIVER_NAME)) {
- dev_err(dev, "Couldn't lock memory region at 0x%08lX\n",
- physaddr);
- rc = -ENODEV;
- goto err_region;
- }
- drvdata->regs_phys = physaddr;
- drvdata->regs = ioremap(physaddr, 8);
- if (!drvdata->regs) {
- dev_err(dev, "Couldn't lock memory region at 0x%08lX\n",
- physaddr);
- rc = -ENODEV;
- goto err_map;
- }
+ drvdata->dcr_start = dcr_start;
+ drvdata->dcr_len = dcr_len;
+ drvdata->dcr_host = dcr_host;
/* Allocate the framebuffer memory */
if (pdata->fb_phys) {
@@ -247,7 +238,7 @@ static int xilinxfb_assign(struct device *dev, unsigned long physaddr,
if (!drvdata->fb_virt) {
dev_err(dev, "Could not allocate frame buffer memory\n");
rc = -ENOMEM;
- goto err_fbmem;
+ goto err_region;
}
/* Clear (turn to black) the framebuffer */
@@ -297,7 +288,6 @@ static int xilinxfb_assign(struct device *dev, unsigned long physaddr,
}
/* Put a banner in the log (for DEBUG) */
- dev_dbg(dev, "regs: phys=%lx, virt=%p\n", physaddr, drvdata->regs);
dev_dbg(dev, "fb: phys=%p, virt=%p, size=%x\n",
(void*)drvdata->fb_phys, drvdata->fb_virt, fbsize);
@@ -313,12 +303,6 @@ err_cmap:
/* Turn off the display */
xilinx_fb_out_be32(drvdata, REG_CTRL, 0);
-err_fbmem:
- iounmap(drvdata->regs);
-
-err_map:
- release_mem_region(physaddr, 8);
-
err_region:
kfree(drvdata);
dev_set_drvdata(dev, NULL);
@@ -344,9 +328,8 @@ static int xilinxfb_release(struct device *dev)
/* Turn off the display */
xilinx_fb_out_be32(drvdata, REG_CTRL, 0);
- iounmap(drvdata->regs);
- release_mem_region(drvdata->regs_phys, 8);
+ dcr_unmap(drvdata->dcr_host, drvdata->dcr_len);
kfree(drvdata);
dev_set_drvdata(dev, NULL);
@@ -362,20 +345,23 @@ static int xilinxfb_release(struct device *dev)
static int __devinit
xilinxfb_of_probe(struct of_device *op, const struct of_device_id *match)
{
- struct resource res;
const u32 *prop;
struct xilinxfb_platform_data pdata;
int size, rc;
+ int start, len;
+ dcr_host_t dcr_host;
/* Copy with the default pdata (not a ptr reference!) */
pdata = xilinx_fb_default_pdata;
dev_dbg(&op->dev, "xilinxfb_of_probe(%p, %p)\n", op, match);
- rc = of_address_to_resource(op->node, 0, &res);
- if (rc) {
+ start = dcr_resource_start(op->node, 0);
+ len = dcr_resource_len(op->node, 0);
+ dcr_host = dcr_map(op->node, start, len);
+ if (!DCR_MAP_OK(dcr_host)) {
dev_err(&op->dev, "invalid address\n");
- return rc;
+ return -ENODEV;
}
prop = of_get_property(op->node, "phys-size", &size);
@@ -399,7 +385,7 @@ xilinxfb_of_probe(struct of_device *op, const struct of_device_id *match)
if (of_find_property(op->node, "rotate-display", NULL))
pdata.rotate_screen = 1;
- return xilinxfb_assign(&op->dev, res.start, &pdata);
+ return xilinxfb_assign(&op->dev, dcr_host, start, len, &pdata);
}
static int __devexit xilinxfb_of_remove(struct of_device *op)
--
1.5.3.4-dirty
More information about the Linuxppc-dev
mailing list