[PATCH] MPC8313 NAND fixes

[Scott Wood]

On Wed, Mar 19, 2008 at 10:28:19AM -0500, Mike Hench wrote:
> 
> From: Mike Hench 
> Sent: Wednesday, March 19, 2008 10:22 AM
> To: 'mhench at wi.rr.com'
> Subject: [PATCH] MPC813 NAND fixes

This patch is whitespace-mangled.  Also, please don't post HTML.

> -           unsigned int irq_status; /* status read from LTESR by irq
> handler */
> 
> +          volatile unsigned int irq_status; /* status read from LTESR
> by irq handler */

This change is not needed; both out_be32() and wait_event() act as
optimization barriers.

> @@ -379,13 +379,13 @@ static int fsl_elbc_run_command(struct m
> 
>                      in_be32(&lbc->fbar), in_be32(&lbc->fpar),
> 
>                      in_be32(&lbc->fbcr), priv->bank);
> 
>  
> 
> +          ctrl->irq_status = 0;
> 
>             /* execute special operation */
> 
>             out_be32(&lbc->lsor, priv->bank);
> 
>  
> 
>             /* wait for FCM complete flag or timeout */
> 
> -           ctrl->irq_status = 0;

ACK this change.

>             wait_event_timeout(ctrl->irq_wait, ctrl->irq_status,
> 
> -                              FCM_TIMEOUT_MSECS * HZ/1000);
> 
> +                             (FCM_TIMEOUT_MSECS * HZ)/1000);

This change is a no-op.  Multiplication and division are evaluated at the
same precedence, left-to-right.

>             if (mtd->writesize == 512) {
> 
>                         priv->page_size = 0;
> 
> -                       clrbits32(&lbc->bank[priv->bank].or,
> ~OR_FCM_PGS);
> 
> +                      clrbits32(&lbc->bank[priv->bank].or, OR_FCM_PGS);

D'oh!  Thanks for finding this.
ACK this change.

> -           /* The default u-boot configuration on MPC8313ERDB causes
> errors;
> 
> -           * more delay is needed.  This should be safe for other
> boards
> 
> -           * as well.
> 
> -           */
> 
> -           setbits32(&lbc->bank[priv->bank].or, 0x70);

And this one.

-Scott