[PATCH] fsl_elbc_nand: fix mtd name

[Anton Vorontsov]

Currently fsl_elbc_nand doesn't initialize mtd->name, and this causes
nand_get_flash_type() to assign name that is equal to chip type, like
this:

   root at b1:~# cat /proc/mtd
   dev:    size   erasesize  name
   mtd0: 00800000 00010000 "fe000000.flash"
   mtd1: 02000000 00004000 "NAND 32MiB 3,3V 8-bit"

mtd0 is physmap_of flash (normal name), and mtd1 is fsl_elbc_nand.

Despite inconsistency, with mtd name like this specifying paritions
from the kernel command line becomes a torture (though, I didn't tried
and not sure if mtdparts= can handle spaces at all). Plus, this causes
real bugs when multiple fsl_elbc_nand chips registered.

With this patch applied fsl_elbc_nand chip will have proper name:

   root at b1:~# cat /proc/mtd
   dev:    size   erasesize  name
   mtd0: 00800000 00010000 "fe000000.flash"
   mtd1: 02000000 00004000 "e0600000.flash"

p.s. We can't use priv->dev->bus_id as in physmap_of, because
fsl_elbc_nand pretends to be a localbus controller, so its bus_id is
"address.localbus", which is incorrect and thus will also not work
for multiple chips.

Signed-off-by: Anton Vorontsov <avorontsov at ru.mvista.com>
---
 drivers/mtd/nand/fsl_elbc_nand.c |    4 ++++
 1 files changed, 4 insertions(+), 0 deletions(-)

diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c
index b025dfe..54a9d83 100644
--- a/drivers/mtd/nand/fsl_elbc_nand.c
+++ b/drivers/mtd/nand/fsl_elbc_nand.c
@@ -974,6 +974,8 @@ static int fsl_elbc_chip_remove(struct fsl_elbc_mtd *priv)
 
 	nand_release(&priv->mtd);
 
+	kfree(priv->mtd.name);
+
 	if (priv->vbase)
 		iounmap(priv->vbase);
 
@@ -1050,6 +1052,8 @@ static int fsl_elbc_chip_probe(struct fsl_elbc_ctrl *ctrl,
 	if (ret)
 		goto err;
 
+	priv->mtd.name = kasprintf(GFP_KERNEL, "%x.flash", res.start);
+
 #ifdef CONFIG_MTD_PARTITIONS
 	/* First look for RedBoot table or partitions on the command
 	 * line, these take precedence over device tree information */
-- 
1.5.2.2