powerpc: cuImage.* creation error

Adrian Bunk bunk at kernel.org
Tue Mar 18 09:23:04 EST 2008


On Mon, Mar 17, 2008 at 04:07:55PM -0400, Paul Gortmaker wrote:
> In message: powerpc: cuImage.* creation error
> on 17/03/2008 Adrian Bunk wrote:
> 
> > When building all powerpc defconfigs in 2.6.25-rc6 exactly three of 
> > them fail to build, and all with similar problems:
> > 
> > <--  snip  -->
> > 
> > 
> > sbc8548_defconfig:
> > 
> > <--  snip  -->
> > 
> > ...
> > Entry Point:  0x00000000
> > make[2]: *** No rule to make target `arch/powerpc/boot/cuImage.tqm8548', needed by `arch/powerpc/boot/zImage'.  Stop.
> > 
> 
> Untested, but I'll guess that this is at least part of the problem for
> the sbc one...

It doesn't fix the build, and adds sbc8560_defconfig to the list of 
non-compiling defconfigs:

<--  snip  -->

...
  WRAP    arch/powerpc/boot/cuImage.sbc8560
DTC: dts->dtb  on file "/home/bunk/linux/kernel-2.6/git/linux-2.6/arch/powerpc/boot/dts/sbc8560.dts"
powerpc64-linux-ld: arch/powerpc/boot/cuboot-sbc8560.o: No such file: No such file or directory
make[2]: *** [arch/powerpc/boot/cuImage.sbc8560] Error 1

<--  snip  -->

> Thanks,
> Paul.
> 
> ---
> 
> Author: Paul Gortmaker <paul.gortmaker at windriver.com>
> Date:   Mon Mar 17 15:47:03 2008 -0400
> 
>     cuimage: fix board names in Makefile
>     
>     Fix the copy and paste error from 25431333813686654907ab987fb5de10c10a16db
>     for the sbc8548 and sbc8560
>     
>     Signed-off-by: Paul Gortmaker <paul.gortmaker at windriver.com>
> 
> diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
> index 4974d9e..1aded8f 100644
> --- a/arch/powerpc/boot/Makefile
> +++ b/arch/powerpc/boot/Makefile
> @@ -253,8 +253,8 @@ image-$(CONFIG_TQM8540)			+= cuImage.tqm8540
>  image-$(CONFIG_TQM8541)			+= cuImage.tqm8541
>  image-$(CONFIG_TQM8555)			+= cuImage.tqm8555
>  image-$(CONFIG_TQM8560)			+= cuImage.tqm8560
> -image-$(CONFIG_SBC8548)			+= cuImage.tqm8548
> -image-$(CONFIG_SBC8560)			+= cuImage.tqm8560
> +image-$(CONFIG_SBC8548)			+= cuImage.sbc8548
> +image-$(CONFIG_SBC8560)			+= cuImage.sbc8560
>  
>  # Board ports in arch/powerpc/platform/embedded6xx/Kconfig
>  image-$(CONFIG_STORCENTER)		+= cuImage.storcenter

cu
Adrian

-- 

       "Is there not promise of rain?" Ling Tan asked suddenly out
        of the darkness. There had been need of rain for many days.
       "Only a promise," Lao Er said.
                                       Pearl S. Buck - Dragon Seed




More information about the Linuxppc-dev mailing list