[PATCH v3 2/4] spi: split up spi_new_device() to allow two stage registration.

[David Brownell]

On Friday 25 July 2008, Grant Likely wrote:
> From: Grant Likely <grant.likely at secretlab.ca>
> 
> spi_new_device() allocates and registers an spi device all in one swoop.
> If the driver needs to add extra data to the spi_device before it is
> registered, then this causes problems.

Mention an example please ... you have dev->archdata in mind, yes?


> This patch splits the allocation and registration portions of code out
> of spi_new_device() and creates three new functions; spi_alloc_device(),
> spi_register_device(), and spi_device_release().

Comment needs fixing:  *TWO* new functions, spi_device_release() was
not needed ...


> spi_new_device() is 
> modified to use the new functions for allocation and registration.
> None of the existing users of spi_new_device() should be affected by
> this change.
> 
> Drivers using the new API can forego the use of an spi_board_info

Strike "an".  :)

> structure to describe the device layout and populate data into the
> spi_device structure directly.
> 
> This change is in preparation for adding an OF device tree parser to
> generate spi_devices based on data in the device tree.
> 
> Signed-off-by: Grant Likely <grant.likely at secretlab.ca>

Given the comment fixes noted above and below:


Acked-by: David Brownell <dbrownell at users.sourceforge.net>

Thanks.



> ---
> 
>  drivers/spi/spi.c       |  139 ++++++++++++++++++++++++++++++++---------------
>  include/linux/spi/spi.h |   10 +++
>  2 files changed, 105 insertions(+), 44 deletions(-)
> 
> diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
> index ecca4a6..2077ef5 100644
> --- a/drivers/spi/spi.c
> +++ b/drivers/spi/spi.c
> @@ -178,6 +178,96 @@ struct boardinfo {
>  static LIST_HEAD(board_list);
>  static DEFINE_MUTEX(board_lock);
>  
> +/**
> + * spi_alloc_device - Allocate a new SPI device
> + * @master: Controller to which device is connected
> + * Context: can sleep
> + *
> + * Allows a driver to allocate and initialize and spi_device without

"a" spi_device

> + * registering it immediately.  This allows a driver to directly
> + * fill the spi_device with device parameters before calling
> + * spi_add_device() on it.
> + *
> + * Caller is responsible to call spi_add_device() on the returned
> + * spi_device structure to add it to the SPI master.  If the caller
> + * needs to discard the spi_device without adding it, then it should
> + * call spi_dev_put() on it.
> + *
> + * Returns a pointer to the new device, or NULL.
> + */
> +struct spi_device *spi_alloc_device(struct spi_master *master)
> +{
> +	struct spi_device	*spi;
> +	struct device		*dev = master->dev.parent;
> +
> +	if (!spi_master_get(master))
> +		return NULL;
> +
> +	spi = kzalloc(sizeof *spi, GFP_KERNEL);
> +	if (!spi) {
> +		dev_err(dev, "cannot alloc spi_device\n");
> +		spi_master_put(master);
> +		return NULL;
> +	}
> +
> +	spi->master = master;
> +	spi->dev.parent = dev;
> +	spi->dev.bus = &spi_bus_type;
> +	spi->dev.release = spidev_release;
> +	device_initialize(&spi->dev);
> +	return spi;
> +}
> +EXPORT_SYMBOL_GPL(spi_alloc_device);
> +
> +/**
> + * spi_add_device - Add an spi_device allocated with spi_alloc_device

Strike "an".


> + * @spi: spi_device to register
> + *
> + * Companion function to spi_alloc_device.  Devices allocated with
> + * spi_alloc_device can be added onto the spi bus with this function.
> + *
> + * Returns 0 on success; non-zero on failure
> + */
> +int spi_add_device(struct spi_device *spi)
> +{
> +	struct device *dev = spi->master->dev.parent;
> +	int status;
> +
> +	/* Chipselects are numbered 0..max; validate. */
> +	if (spi->chip_select >= spi->master->num_chipselect) {
> +		dev_err(dev, "cs%d > max %d\n",

Nit;  "cs%d >= max %d" ... no need to carry this minor bug forward.


> +			spi->chip_select,
> +			spi->master->num_chipselect);
> +		return -EINVAL;
> +	}
> +
> +	/* Set the bus ID string */
> +	snprintf(spi->dev.bus_id, sizeof spi->dev.bus_id,
> +			"%s.%u", spi->master->dev.bus_id,
> +			spi->chip_select);
> +
> +	/* drivers may modify this initial i/o setup */
> +	status = spi->master->setup(spi);

Hmm, I just noticed this *pre-existing* bug:  if there's already
a device with this chipselect (so the device_add will fail, later),
its configuration will be trashed here.  That's not a reason to NAK
this patch.  (I think the fix would be as simple as calling setup
in spi_drv_probe, and making sure that's always called even if for
some odd reason the driver doesn't have its own probe routine.  If
you want to fix that, great ... otherwise I'll try to get it done
before 2.6.27 finishes.)


> +	if (status < 0) {
> +		dev_err(dev, "can't %s %s, status %d\n",
> +				"setup", spi->dev.bus_id, status);
> +		return status;
> +	}
> +
> +	/* driver core catches callers that misbehave by defining
> +	 * devices that already exist.
> +	 */
> +	status = device_add(&spi->dev);
> +	if (status < 0) {
> +		dev_err(dev, "can't %s %s, status %d\n",
> +				"add", spi->dev.bus_id, status);
> +		return status;
> +	}
> +
> +	dev_dbg(dev, "registered child %s\n", spi->dev.bus_id);
> +	return 0;
> +}
> +EXPORT_SYMBOL_GPL(spi_add_device);
>  
>  /**
>   * spi_new_device - instantiate one new SPI device
> @@ -197,7 +287,6 @@ struct spi_device *spi_new_device(struct spi_master *master,
>  				  struct spi_board_info *chip)
>  {
>  	struct spi_device	*proxy;
> -	struct device		*dev = master->dev.parent;
>  	int			status;
>  
>  	/* NOTE:  caller did any chip->bus_num checks necessary.
> @@ -207,66 +296,28 @@ struct spi_device *spi_new_device(struct spi_master *master,
>  	 * suggests syslogged diagnostics are best here (ugh).
>  	 */
>  
> -	/* Chipselects are numbered 0..max; validate. */
> -	if (chip->chip_select >= master->num_chipselect) {
> -		dev_err(dev, "cs%d > max %d\n",
> -			chip->chip_select,
> -			master->num_chipselect);
> -		return NULL;
> -	}
> -
> -	if (!spi_master_get(master))
> +	proxy = spi_alloc_device(master);
> +	if (!proxy)
>  		return NULL;
>  
>  	WARN_ON(strlen(chip->modalias) >= sizeof(proxy->modalias));
>  
> -	proxy = kzalloc(sizeof *proxy, GFP_KERNEL);
> -	if (!proxy) {
> -		dev_err(dev, "can't alloc dev for cs%d\n",
> -			chip->chip_select);
> -		goto fail;
> -	}
> -	proxy->master = master;
>  	proxy->chip_select = chip->chip_select;
>  	proxy->max_speed_hz = chip->max_speed_hz;
>  	proxy->mode = chip->mode;
>  	proxy->irq = chip->irq;
>  	strlcpy(proxy->modalias, chip->modalias, sizeof(proxy->modalias));
> -
> -	snprintf(proxy->dev.bus_id, sizeof proxy->dev.bus_id,
> -			"%s.%u", master->dev.bus_id,
> -			chip->chip_select);
> -	proxy->dev.parent = dev;
> -	proxy->dev.bus = &spi_bus_type;
>  	proxy->dev.platform_data = (void *) chip->platform_data;
>  	proxy->controller_data = chip->controller_data;
>  	proxy->controller_state = NULL;
> -	proxy->dev.release = spidev_release;
>  
> -	/* drivers may modify this initial i/o setup */
> -	status = master->setup(proxy);
> +	status = spi_add_device(proxy);
>  	if (status < 0) {
> -		dev_err(dev, "can't %s %s, status %d\n",
> -				"setup", proxy->dev.bus_id, status);
> -		goto fail;
> +		spi_dev_put(proxy);
> +		return NULL;
>  	}
>  
> -	/* driver core catches callers that misbehave by defining
> -	 * devices that already exist.
> -	 */
> -	status = device_register(&proxy->dev);
> -	if (status < 0) {
> -		dev_err(dev, "can't %s %s, status %d\n",
> -				"add", proxy->dev.bus_id, status);
> -		goto fail;
> -	}
> -	dev_dbg(dev, "registered child %s\n", proxy->dev.bus_id);
>  	return proxy;
> -
> -fail:
> -	spi_master_put(master);
> -	kfree(proxy);
> -	return NULL;
>  }
>  EXPORT_SYMBOL_GPL(spi_new_device);
>  
> diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
> index a9cc29d..d203d08 100644
> --- a/include/linux/spi/spi.h
> +++ b/include/linux/spi/spi.h
> @@ -778,8 +778,18 @@ spi_register_board_info(struct spi_board_info const *info, unsigned n)
>   * use spi_new_device() to describe each device.  You can also call
>   * spi_unregister_device() to start making that device vanish, but
>   * normally that would be handled by spi_unregister_master().
> + *
> + * You can also use spi_alloc_device() and spi_add_device() to
> + * for

to, for, sex, ate ... voudou will appreciate!!  ;)

Make that "to use" a two stage registration "sequence".

> 		a two stage registration of an SPI device.  This gives the caller 
> + * some more control over the spi_device structure before it is registered

"... before it is registered, but requires that caller to initialize fields that
would otherwise be defined using the board info."


>   */
>  extern struct spi_device *
> +spi_alloc_device(struct spi_master *master);
> +
> +extern int
> +spi_add_device(struct spi_device *spi);
> +
> +extern struct spi_device *
>  spi_new_device(struct spi_master *, struct spi_board_info *);
>  
>  static inline void
>