netif_schedule and mpc5200_fec
Jon Smirl
jonsmirl at gmail.com
Wed Jul 23 08:54:18 EST 2008
On 7/22/08, David Miller <davem at davemloft.net> wrote:
> From: "Jon Smirl" <jonsmirl at gmail.com>
> Date: Tue, 22 Jul 2008 17:03:32 -0400
>
>
> > On 7/22/08, Jon Smirl <jonsmirl at gmail.com> wrote:
> > > I just updated to linus/master and mpc5200_fec won't boot.
> >
> > It does boot, but this badness looks like it is coming from this
> > patch. I don't know enough about networking to debug it.
>
>
> I just applied the following patch from Anton Vorontsov which
> will fix this.
I applied this piece and still have the same error.
diff --git a/drivers/net/fec_mpc52xx.c b/drivers/net/fec_mpc52xx.c
index b487d6f..4e4f683 100644
--- a/drivers/net/fec_mpc52xx.c
+++ b/drivers/net/fec_mpc52xx.c
@@ -197,9 +197,6 @@ static void mpc52xx_fec_adjust_link(struct net_device *dev)
if (priv->link == PHY_DOWN) {
new_state = 1;
priv->link = phydev->link;
-// netif_tx_schedule_all(dev);
-// netif_carrier_on(dev);
-// netif_start_queue(dev);
}
} else if (priv->link) {
@@ -207,8 +204,6 @@ static void mpc52xx_fec_adjust_link(struct net_device *dev)
priv->link = PHY_DOWN;
priv->speed = 0;
priv->duplex = -1;
-// netif_stop_queue(dev);
-// netif_carrier_off(dev);
}
if (new_state && netif_msg_link(priv))
jonsmirl at terra:~/fs$
net eth0: attached phy 0 to driver Generic PHY
Sending DHCP requests .<0>------------[ cut here ]------------
Badness at c01da570 [verbose debug info unavailable]
NIP: c01da570 LR: c015b31c CTR: c015b234
REGS: c382de70 TRAP: 0700 Not tainted (2.6.26-efika)
MSR: 00029032 <EE,ME,IR,DR> CR: 22000082 XER: 00000000
TASK = c3815000[4] 'events/0' THREAD: c382c000
GPR00: 00000001 c382df20 c3815000 c031e468 c38f25a0 00000000 00000000 00000000
GPR08: c382dfb4 c0330000 00000000 c031e468 2f762097 ffffffff 03ffe000 ffffffff
GPR16: 00000001 00000000 007ffc00 00000000 00000000 03ff8838 00000000 00000004
GPR24: 00000000 00000000 c032b46c c0330000 c38a2e00 00000001 c38f2780 c38f2400
NIP [c01da570] __netif_schedule+0x3c/0xac
LR [c015b31c] mpc52xx_fec_adjust_link+0xe8/0x194
Call Trace:
[c382df20] [c002eeb0] queue_work+0x58/0x6c (unreliable)
[c382df40] [c015b31c] mpc52xx_fec_adjust_link+0xe8/0x194
[c382df60] [c0158cd0] phy_state_machine+0xec/0x4e0
[c382df80] [c002eb0c] run_workqueue+0xb4/0x148
[c382dfa0] [c002f070] worker_thread+0x9c/0xb8
[c382dfd0] [c0032954] kthread+0x4c/0x88
[c382dff0] [c000f538] kernel_thread+0x44/0x60
Instruction dump:
7c6b1b78 3929e468 7f834800 39200002 90010024 38030024 bfa10014 40be0030
3d20c033 80099988 7c000034 5400d97e <0f000000> 2f800000 41be0054 38000001
PHY: f0003000:00 - Link is Up - 100/Full
., OK
IP-Config: Got DHCP answer from 192.168.1.1, my address is 192.168.1.11
IP-Config: Complete:
device=eth0, addr=192.168.1.11, mask=255.255.255.0, gw=192.168.1.1,
host=Phytec, domain=, nis-domain=(none),
bootserver=192.168.1.1, rootserver=192.168.1.4, rootpath=
--
Jon Smirl
jonsmirl at gmail.com
More information about the Linuxppc-dev
mailing list