bug: mutex_lock() in interrupt conntext via phy_stop() in gianfar

[Sebastian Siewior]

* Nate Case | 2008-07-21 17:57:08 [-0500]:

>On Fri, 2008-07-18 at 14:10 +0200, Sebastian Siewior wrote:
>> Commit 35b5f6b1a aka [PHYLIB: Locking fixes for PHY I/O potentially sleeping]
>> changed the phydev->lock from spinlock into a mutex. Now, the following
>> code path got triggered while NFS was unavailable:
>> 
>[snip]
>> |[  194.864733] BUG: sleeping function called from invalid context at /home/bigeasy/git/linux-2.6-powerpc/kernel/mutex.c:87
>> |[  194.875529] in_atomic():1, irqs_disabled():0
>> |[  194.879805] Call Trace:
>> |[  194.882250] [c0383d90] [c0006dd8] show_stack+0x48/0x184 (unreliable)
>> |[  194.888649] [c0383db0] [c001e938] __might_sleep+0xe0/0xf4
>> |[  194.894069] [c0383dc0] [c025a43c] mutex_lock+0x24/0x3c
>> |[  194.899234] [c0383de0] [c019005c] phy_stop+0x20/0x70
>> |[  194.904234] [c0383df0] [c018d4ec] stop_gfar+0x28/0xf4
>> |[  194.909305] [c0383e10] [c018e8c4] gfar_timeout+0x30/0x60
>> |[  194.914638] [c0383e20] [c01fe7c0] dev_watchdog+0xa8/0x144
>
>Hmm..  I'm not sure what the best solution is to this.  Make the
>stop_gfar() call happen in a workqueue, and make a similar change to
>ucc_geth, fec_mpc52xx, and fs_enet? Modify phy_stop() to do the work in
>a workqueue conditionally if in interrupt context?  Between these two
>I'd lean toward the latter.
>
>Does anyone have any better ideas?
If I look at tg3.c than exactly this is done. Others call it only on
close(). I guess this depends very much on driver's logic :)
If nobody minds, than I would assume that tg3.c is a good example and I
would move the timout path into a workqueu.

Sebastian