UIO not working on ppc405 onchip registers

[super.firetwister at googlemail.com]

Hello Uwe,

On Tuesday 22 July 2008, Uwe Kleine-König wrote:

> I don't know powerpc in general nor ppc405ep in detail but IIRC arm has
> problems if some memory is mapped twice.  Might this be the problem
> here?

Maybee, the emac0 (0xef600800) and emac1 (0xef600900) get mapped as well, 
because AFAIK I have to map a whole pagesize (0x1000).

> > +       int uiofd = open(UIO_DEV,O_RDWR);
>
> For debugging this is OK, in the final application you should add some
> tests.  Check the UIO documentation for the details.

The whole example was meant to be short.


> > +static int uio_gpio_remove(struct device *dev)
> > +{
> > +       uio_unregister_device(&info);
> > +       info.mem[0].addr = 0;
> > +       info.mem[0].size = 0;
> > +       return 0;
> > +}
>
> Are you sure that overwriting info.mem[0].addr is a good idea?  Then
> unbinding the platform device and rebinding it fails to do the right
> thing for sure.

This was stolen from uio_dummy. So this might become a common error :(


Thanks a lot for your comments, I will try to get an exclusive memory region 
mapped.

Markus