[RFC v3 PATCH 6/4] Use LOAD_REG_IMMEDIATE macros

Mohan Kumar M mohan at in.ibm.com
Tue Jul 22 14:37:23 EST 2008


Paul Mackerras wrote:
> Mohan Kumar M writes:
> 
> @@ -714,7 +714,7 @@ _GLOBAL(enter_rtas)
>          std	r6,PACASAVEDMSR(r13)
> 
>  	/* Setup our real return addr */	
> -	LOAD_REG_ADDR(r4,.rtas_return_loc)
> +	LOAD_REG_IMMEDIATE(r4,.rtas_return_loc)
> 
> If LOAD_REG_ADDR doesn't work, then how are all the TOC loads in
> gcc-generated code going to work?
> 

Hi Paul,

We have a problem only when there is a reference to a variable through got.

Following mail sent to Segher yesterday may explain it.

I was going through the output generated by objdump -D vmlinux and 
readelf -h vmlinux.


<Snip objdump of vmlinux>

Disassembly of section .got:

c000000000805010 <__toc_start>:
c000000000805010:       c0 00 00 00     lfs     f0,0(0)
c000000000805014:       00 80 d0 10     .long 0x80d010
c000000000805018:       c0 00 00 00     lfs     f0,0(0)
c00000000080501c:       00 00 83 58     .long 0x8358
c000000000805020:       c0 00 00 00     lfs     f0,0(0)
c000000000805024:       00 85 1f e8     .long 0x851fe8
c000000000805028:       c0 00 00 00     lfs     f0,0(0)
c00000000080502c:       00 00 8d 84     .long 0x8d84
c000000000805030:       c0 00 00 00     lfs     f0,0(0)
c000000000805034:       00 85 03 38     .long 0x850338
c000000000805038:       c0 00 00 00     lfs     f0,0(0)
c00000000080503c:       00 85 28 b8     .long 0x8528b8
c000000000805040:       c0 00 00 00     lfs     f0,0(0)
c000000000805044:       00 85 28 b0     .long 0x8528b0
c000000000805048:       c0 00 00 00     lfs     f0,0(0)
c00000000080504c:       00 6d ef 60     .long 0x6def60

All of the variables references through @got translated into relocation 
type R_PPC64_GOT16_DS entries. All these entries correspond to one of 
the above entries in the .got section. But none of the entries in .got 
section are relocated.

For example the instruction with relocation type R_PPC64_GOT16_DS,
c00000000000830c:       e8 62 80 10     ld      r3,-32752(r2)

refers to current_set variable. r2 will be pointing to 
0xc00000000280d010 (relocated __toc_start + 0x8000). So the instruction 
loads r3 with the content 0xc000000000851fe8 at location 
0xc000000002805020, but which is not a relocated entry (0xc000000000851fe8)


But when there is a relocation type of R_PPC64_ADDR16_HI, like
c000000000008110:       64 84 00 00     oris    r4,r4,0

we could easily get more info about this relocation from readelf like:

c000000000008112  000100000005 R_PPC64_ADDR16_HI c000000000000000 .text 
+ 8124

So from above output we can identify that instruction at address 
c000000000008112 needs to be patched with the relocation delta.


Now I have two options left:
1. Check for R_PPC64_GOT16_DS entries and check whether the contents 
addressed by r2+offset is relocated or not and apply relocation if its not.
2. Change all LOAD_REG_ADDR macros to LOAD_REG_IMMEDIATE. This I have 
already done.


Regards,
Mohan.



More information about the Linuxppc-dev mailing list