[PATCH] Add MPC5200B base board mvBC-P

[David Gibson]

On Fri, Jul 04, 2008 at 06:35:39PM +0200, Andre Schwarz wrote:
> The mvBlueCOUGAR-P is a MPC5200B based camera system with Intel Gigabit ethernet
> controller (using e1000). It's just another MPC5200_simple board.
> 
> Signed-off-by: Andre Schwarz <andre.schwarz at matrix-vision.de>
[snip]
> --- /dev/null
> +++ b/arch/powerpc/boot/dts/mvbc-p.dts
> @@ -0,0 +1,206 @@

[snip]
> +		dma-controller at 1200 {
> +			device_type = "dma-controller";

No device_type here.

> +			compatible = "fsl,mpc5200-bestcomm";
> +			reg = <0x1200 0x80>;
> +			interrupts = <3 0 0  3 1 0  3 2 0  3 3 0
> +				3 4 0  3 5 0  3 6 0  3 7 0
> +				3 8 0  3 9 0  3 10 0  3 11 0
> +				3 12 0  3 13 0  3 14 0  3 15 0>;
> +			interrupt-parent = <&mpc5200_pic>;
> +		};
> +
> +		xlb at 1f00 {
> +			compatible = "fsl,mpc5200-xlb";
> +			reg = <0x1f00 0x100>;
> +		};
> +
> +		serial0: serial at 2000 {		// PSC1
> +			device_type = "serial";
> +			compatible = "fsl,mpc5200-psc-uart";
> +			port-number = <0>;
> +			reg = <0x2000 0x100>;
> +			interrupts = <2 1 0>;
> +			interrupt-parent = <&mpc5200_pic>;
> +		};
> +
> +		i2c at 3d00 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			compatible = "fsl,mpc5200-i2c","fsl-i2c";
> +			reg = <0x3d00 0x40>;
> +			interrupts = <2 15 0>;
> +			interrupt-parent = <&mpc5200_pic>;
> +			fsl5200-clocking;
> +		};
> +
> +		i2c at 3d40 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			compatible = "fsl,mpc5200-i2c","fsl-i2c";
> +			reg = <0x3d40 0x40>;
> +			interrupts = <2 16 0>;
> +			interrupt-parent = <&mpc5200_pic>;
> +			fsl5200-clocking;
> +		};
> +		sram at 8000 {
> +			compatible = "fsl,mpc5200-sram","sram";
> +			reg = <0x8000 0x4000>;
> +		};
> +	};

-- 
David Gibson			| I'll have my music baroque, and my code
david AT gibson.dropbear.id.au	| minimalist, thank you.  NOT _the_ _other_
				| _way_ _around_!
http://www.ozlabs.org/~dgibson