[PATCH] powerpc: Add documentation for CPM GPIO banks

[Jochen Friedrich]

Signed-off-by: Jochen Friedrich <jochen at scram.de>
---
 Documentation/powerpc/device-tree/fsl/cpm/gpio.txt |   38 ++++++++++++++++++++
 1 files changed, 38 insertions(+), 0 deletions(-)
 create mode 100644 Documentation/powerpc/device-tree/fsl/cpm/gpio.txt

diff --git a/Documentation/powerpc/device-tree/fsl/cpm/gpio.txt b/Documentation/powerpc/device-tree/fsl/cpm/gpio.txt
new file mode 100644
index 0000000..54644ae
--- /dev/null
+++ b/Documentation/powerpc/device-tree/fsl/cpm/gpio.txt
@@ -0,0 +1,38 @@
+Every GPIO controller node must have #gpio-cells property defined,
+this information will be used to translate gpio-specifiers.
+
+On CPM1 devices, all ports are using slightly different register layouts.
+Ports A, C and D are 16bit ports and Ports B and E are 32bit ports.
+
+On CPM2 devices, all ports are 32bit ports and use a common register layout.
+
+Required properties:
+- compatible : "fsl,cpm1-pario-bank-a", "fsl,cpm1-pario-bank-b", 
+  "fsl,cpm1-pario-bank-c", "fsl,cpm1-pario-bank-d",
+  "fsl,cpm1-pario-bank-e", "fsl,cpm2-pario-bank"
+- #gpio-cells : Should be two. The first cell is the pin number and the
+  second cell is used to specify optional paramters (currently unused).
+- gpio-controller : Marks the port as GPIO controller.
+
+Example of three SOC GPIO banks defined as gpio-controller nodes:
+
+	CPM1_PIO_A: gpio-controller at 950 {
+		#gpio-cells = <2>;
+		compatible = "fsl,cpm1-pario-bank-a";
+		reg = <0x950 0x10>;
+		gpio-controller;
+	};
+
+	CPM1_PIO_B: gpio-controller at ab8 {
+		#gpio-cells = <2>;
+		compatible = "fsl,cpm1-pario-bank-b";
+		reg = <0xab8 0x10>;
+		gpio-controller;
+	};
+
+	CPM1_PIO_E: gpio-controller at ac8 {
+		#gpio-cells = <2>;
+		compatible = "fsl,cpm1-pario-bank-e";
+		reg = <0xac8 0x18>;
+		gpio-controller;
+	};
-- 
1.5.6