[PATCH] powerpc: Add i2c pins to dts and board setup
Jochen Friedrich
jochen at scram.de
Thu Jul 3 02:06:13 EST 2008
Initialize I2C pins on boards with CPM1/CPM2 controllers
and document the i2c bus in booting-without-of.
The boards don't have any I2C chips connected to the I2C
bus, so unless some external chips are connected to the
boards, this code is just an example of setting everything
else up.
Signed-off-by: Jochen Friedrich <jochen at scram.de>
---
Documentation/powerpc/booting-without-of.txt | 42 ++++++++++++++++++++++++++
arch/powerpc/boot/dts/mpc8272ads.dts | 11 +++++++
arch/powerpc/boot/dts/mpc866ads.dts | 11 +++++++
arch/powerpc/boot/dts/mpc885ads.dts | 11 +++++++
arch/powerpc/platforms/82xx/mpc8272_ads.c | 4 ++
arch/powerpc/platforms/8xx/mpc86xads_setup.c | 4 ++
arch/powerpc/platforms/8xx/mpc885ads_setup.c | 3 ++
7 files changed, 86 insertions(+), 0 deletions(-)
diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt
index d9dc996..26d323f 100644
--- a/Documentation/powerpc/booting-without-of.txt
+++ b/Documentation/powerpc/booting-without-of.txt
@@ -2132,6 +2132,48 @@ platforms are moved over to use the flattened-device-tree model.
};
};
+ x) I2C
+
+ The I2C controller is expressed as a bus under the CPM node.
+
+ Properties:
+ - compatible : "fsl,cpm1-i2c", "fsl,cpm2-i2c"
+ - reg : On CPM2 devices, the second resource doesn't specify the I2C
+ Parameter RAM itself, but the I2C_BASE field of the CPM2 Parameter RAM
+ (typically 0x8afc 0x2).
+ - #address-cells : Should be one. The cell is the i2c device address with
+ the r/w bit set to zero.
+ - #size-cells : Should be zero.
+ - clock-frequency : Can be used to set the i2c clock frequency. If
+ unspecified, a default frequency of 60kHz is being used.
+ The following two properties are deprecated. They are only used by legacy
+ i2c drivers to find the bus to probe:
+ - linux,i2c-index : Can be used to hard code an i2c bus number. By default,
+ the bus number is dynamically assigned by the i2c core.
+ - linux,i2c-class : Can be used to override the i2c class. The class is used
+ by legacy i2c device drivers to find a bus in a specific context like
+ system management, video or sound. By default, I2C_CLASS_HWMON (1) is
+ being used. The definition of the classes can be found in
+ include/i2c/i2c.h
+
+ Example, based on mpc823:
+
+ i2c at 860 {
+ compatible = "fsl,mpc823-i2c",
+ "fsl,cpm1-i2c";
+ reg = <0x860 0x20 0x3c80 0x30>;
+ interrupts = <16>;
+ interrupt-parent = <&CPM_PIC>;
+ fsl,cpm-command = <0x10>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rtc at 68 {
+ compatible = "dallas,ds1307";
+ reg = <0x68>;
+ };
+ };
+
m) Chipselect/Local Bus
Properties:
diff --git a/arch/powerpc/boot/dts/mpc8272ads.dts b/arch/powerpc/boot/dts/mpc8272ads.dts
index 46e2da3..d27f8a7 100644
--- a/arch/powerpc/boot/dts/mpc8272ads.dts
+++ b/arch/powerpc/boot/dts/mpc8272ads.dts
@@ -217,6 +217,17 @@
linux,network-index = <1>;
fsl,cpm-command = <0x16200300>;
};
+
+ i2c at 11860 {
+ compatible = "fsl,mpc8272-i2c",
+ "fsl,cpm2-i2c";
+ reg = <0x11860 0x20 0x8afc 0x2>;
+ interrupts = <1 8>;
+ interrupt-parent = <&PIC>;
+ fsl,cpm-command = <0x29600000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
};
PIC: interrupt-controller at 10c00 {
diff --git a/arch/powerpc/boot/dts/mpc866ads.dts b/arch/powerpc/boot/dts/mpc866ads.dts
index 765e43c..bd70065 100644
--- a/arch/powerpc/boot/dts/mpc866ads.dts
+++ b/arch/powerpc/boot/dts/mpc866ads.dts
@@ -171,6 +171,17 @@
fsl,cpm-command = <0000>;
linux,network-index = <1>;
};
+
+ i2c at 860 {
+ compatible = "fsl,mpc866-i2c",
+ "fsl,cpm1-i2c";
+ reg = <0x860 0x20 0x3c80 0x30>;
+ interrupts = <16>;
+ interrupt-parent = <&CPM_PIC>;
+ fsl,cpm-command = <0x10>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
};
};
diff --git a/arch/powerpc/boot/dts/mpc885ads.dts b/arch/powerpc/boot/dts/mpc885ads.dts
index 9895043..b123e9f 100644
--- a/arch/powerpc/boot/dts/mpc885ads.dts
+++ b/arch/powerpc/boot/dts/mpc885ads.dts
@@ -215,6 +215,17 @@
fsl,cpm-command = <0x80>;
linux,network-index = <2>;
};
+
+ i2c at 860 {
+ compatible = "fsl,mpc885-i2c",
+ "fsl,cpm1-i2c";
+ reg = <0x860 0x20 0x3c80 0x30>;
+ interrupts = <16>;
+ interrupt-parent = <&CPM_PIC>;
+ fsl,cpm-command = <0x10>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
};
};
diff --git a/arch/powerpc/platforms/82xx/mpc8272_ads.c b/arch/powerpc/platforms/82xx/mpc8272_ads.c
index 7d30187..8054c68 100644
--- a/arch/powerpc/platforms/82xx/mpc8272_ads.c
+++ b/arch/powerpc/platforms/82xx/mpc8272_ads.c
@@ -96,6 +96,10 @@ static struct cpm_pin mpc8272_ads_pins[] = {
{1, 31, CPM_PIN_OUTPUT | CPM_PIN_PRIMARY},
{2, 16, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
{2, 17, CPM_PIN_INPUT | CPM_PIN_PRIMARY},
+
+ /* I2C */
+ {3, 14, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_OPENDRAIN},
+ {3, 15, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_OPENDRAIN},
};
static void __init init_ioports(void)
diff --git a/arch/powerpc/platforms/8xx/mpc86xads_setup.c b/arch/powerpc/platforms/8xx/mpc86xads_setup.c
index c028a5b..caaec29 100644
--- a/arch/powerpc/platforms/8xx/mpc86xads_setup.c
+++ b/arch/powerpc/platforms/8xx/mpc86xads_setup.c
@@ -65,6 +65,10 @@ static struct cpm_pin mpc866ads_pins[] = {
{CPM_PORTD, 13, CPM_PIN_OUTPUT},
{CPM_PORTD, 14, CPM_PIN_OUTPUT},
{CPM_PORTD, 15, CPM_PIN_OUTPUT},
+
+ /* I2C */
+ {CPM_PORTB, 26, CPM_PIN_INPUT | CPM_PIN_OPENDRAIN},
+ {CPM_PORTB, 27, CPM_PIN_INPUT | CPM_PIN_OPENDRAIN},
};
static void __init init_ioports(void)
diff --git a/arch/powerpc/platforms/8xx/mpc885ads_setup.c b/arch/powerpc/platforms/8xx/mpc885ads_setup.c
index 6e7ded0..45ed6cd 100644
--- a/arch/powerpc/platforms/8xx/mpc885ads_setup.c
+++ b/arch/powerpc/platforms/8xx/mpc885ads_setup.c
@@ -158,6 +158,9 @@ static struct cpm_pin mpc885ads_pins[] = {
{CPM_PORTE, 28, CPM_PIN_OUTPUT},
{CPM_PORTE, 29, CPM_PIN_OUTPUT},
#endif
+ /* I2C */
+ {CPM_PORTB, 26, CPM_PIN_INPUT | CPM_PIN_OPENDRAIN},
+ {CPM_PORTB, 27, CPM_PIN_INPUT | CPM_PIN_OPENDRAIN},
};
static void __init init_ioports(void)
--
1.5.6
More information about the Linuxppc-dev
mailing list