[alsa-devel] [PATCH 3/3] ALSA SoC: Add Texas Instruments TLV320AIC26 codec driver
Jon Smirl
jonsmirl at gmail.com
Wed Jul 2 23:52:41 EST 2008
On 7/1/08, Grant Likely <grant.likely at secretlab.ca> wrote:
> From: Grant Likely <grant.likely at secretlab.ca>
>
> ASoC Codec driver for the TLV320AIC26 device. This driver uses the ASoC
> v1 API, so I don't expect it to get merged as-is, but I want to get it
> out there for review.
> ---
>
> sound/soc/codecs/Kconfig | 4
> sound/soc/codecs/Makefile | 2
> sound/soc/codecs/tlv320aic26.c | 630 ++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 636 insertions(+), 0 deletions(-)
>
> diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
> index 3903ab7..96c7bfe 100644
> --- a/sound/soc/codecs/Kconfig
> +++ b/sound/soc/codecs/Kconfig
> @@ -41,6 +41,10 @@ config SND_SOC_CS4270_VD33_ERRATA
> bool
> depends on SND_SOC_CS4270
>
> +config SND_SOC_TLV320AIC26
> + tristate "TI TLB320AIC26 Codec support"
> + depends on SND_SOC && SPI
> +
> config SND_SOC_TLV320AIC3X
> tristate
> depends on SND_SOC && I2C
> diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile
> index 4e1314c..ec0cd93 100644
> --- a/sound/soc/codecs/Makefile
> +++ b/sound/soc/codecs/Makefile
> @@ -5,6 +5,7 @@ snd-soc-wm8753-objs := wm8753.o
> snd-soc-wm9712-objs := wm9712.o
> snd-soc-wm9713-objs := wm9713.o
> snd-soc-cs4270-objs := cs4270.o
> +snd-soc-tlv320aic26-objs := tlv320aic26.o
> snd-soc-tlv320aic3x-objs := tlv320aic3x.o
>
> obj-$(CONFIG_SND_SOC_AC97_CODEC) += snd-soc-ac97.o
> @@ -14,4 +15,5 @@ obj-$(CONFIG_SND_SOC_WM8753) += snd-soc-wm8753.o
> obj-$(CONFIG_SND_SOC_WM9712) += snd-soc-wm9712.o
> obj-$(CONFIG_SND_SOC_WM9713) += snd-soc-wm9713.o
> obj-$(CONFIG_SND_SOC_CS4270) += snd-soc-cs4270.o
> +obj-$(CONFIG_SND_SOC_TLV320AIC26) += snd-soc-tlv320aic26.o
> obj-$(CONFIG_SND_SOC_TLV320AIC3X) += snd-soc-tlv320aic3x.o
> diff --git a/sound/soc/codecs/tlv320aic26.c b/sound/soc/codecs/tlv320aic26.c
> new file mode 100644
> index 0000000..aee1dbc
> --- /dev/null
> +++ b/sound/soc/codecs/tlv320aic26.c
> @@ -0,0 +1,630 @@
> +/*
> + * Texas Instruments TLV320AIC26 low power audio CODEC
> + * ALSA SoC CODEC driver
> + *
> + * Copyright (C) 2008 Secret Lab Technologies Ltd.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/moduleparam.h>
> +#include <linux/init.h>
> +#include <linux/delay.h>
> +#include <linux/pm.h>
> +#include <linux/device.h>
> +#include <linux/sysfs.h>
> +#include <linux/spi/spi.h>
> +#include <sound/core.h>
> +#include <sound/pcm.h>
> +#include <sound/pcm_params.h>
> +#include <sound/soc.h>
> +#include <sound/soc-dapm.h>
> +#include <sound/soc-of.h>
> +#include <sound/initval.h>
> +
> +MODULE_DESCRIPTION("ASoC TLV320AIC26 codec driver");
> +MODULE_AUTHOR("Grant Likely <grant.likely at secretlab.ca>");
> +MODULE_LICENSE("GPL");
> +
> +/* AIC26 Registers */
> +#define AIC26_READ_COMMAND_WORD(addr) ((1 << 15) | (addr << 5))
> +#define AIC26_WRITE_COMMAND_WORD(addr) ((0 << 15) | (addr << 5))
> +#define AIC26_PAGE_ADDR(page, offset) ((page << 6) | offset)
> +#define AIC26_NUM_REGS AIC26_PAGE_ADDR(3, 0)
> +#define AIC26_REG_CACHE_SIZE (0x20) /* only page 2 cached */
> +#define AIC26_REG_IS_CACHED(addr) ((addr & ~0x1f) == (2 << 6))
> +#define AIC26_REG_CACHE_ADDR(addr) (addr & 0x1f)
> +
> +/* Page 0: Auxillary data registers */
> +#define AIC26_REG_BAT1 AIC26_PAGE_ADDR(0, 0x05)
> +#define AIC26_REG_BAT2 AIC26_PAGE_ADDR(0, 0x06)
> +#define AIC26_REG_AUX AIC26_PAGE_ADDR(0, 0x07)
> +#define AIC26_REG_TEMP1 AIC26_PAGE_ADDR(0, 0x09)
> +#define AIC26_REG_TEMP2 AIC26_PAGE_ADDR(0, 0x0A)
> +
> +/* Page 1: Auxillary control registers */
> +#define AIC26_REG_AUX_ADC AIC26_PAGE_ADDR(1, 0x00)
> +#define AIC26_REG_STATUS AIC26_PAGE_ADDR(1, 0x01)
> +#define AIC26_REG_REFERENCE AIC26_PAGE_ADDR(1, 0x03)
> +#define AIC26_REG_RESET AIC26_PAGE_ADDR(1, 0x04)
> +
> +/* Page 2: Audio control registers */
> +#define AIC26_REG_AUDIO_CTRL1 AIC26_PAGE_ADDR(2, 0x00)
> +#define AIC26_REG_ADC_GAIN AIC26_PAGE_ADDR(2, 0x01)
> +#define AIC26_REG_DAC_GAIN AIC26_PAGE_ADDR(2, 0x02)
> +#define AIC26_REG_SIDETONE AIC26_PAGE_ADDR(2, 0x03)
> +#define AIC26_REG_AUDIO_CTRL2 AIC26_PAGE_ADDR(2, 0x04)
> +#define AIC26_REG_POWER_CTRL AIC26_PAGE_ADDR(2, 0x05)
> +#define AIC26_REG_AUDIO_CTRL3 AIC26_PAGE_ADDR(2, 0x06)
> +
> +#define AIC26_REG_FILTER_COEFF_L_N0 AIC26_PAGE_ADDR(2, 0x07)
> +#define AIC26_REG_FILTER_COEFF_L_N1 AIC26_PAGE_ADDR(2, 0x08)
> +#define AIC26_REG_FILTER_COEFF_L_N2 AIC26_PAGE_ADDR(2, 0x09)
> +#define AIC26_REG_FILTER_COEFF_L_N3 AIC26_PAGE_ADDR(2, 0x0A)
> +#define AIC26_REG_FILTER_COEFF_L_N4 AIC26_PAGE_ADDR(2, 0x0B)
> +#define AIC26_REG_FILTER_COEFF_L_N5 AIC26_PAGE_ADDR(2, 0x0C)
> +#define AIC26_REG_FILTER_COEFF_L_D1 AIC26_PAGE_ADDR(2, 0x0D)
> +#define AIC26_REG_FILTER_COEFF_L_D2 AIC26_PAGE_ADDR(2, 0x0E)
> +#define AIC26_REG_FILTER_COEFF_L_D4 AIC26_PAGE_ADDR(2, 0x0F)
> +#define AIC26_REG_FILTER_COEFF_L_D5 AIC26_PAGE_ADDR(2, 0x10)
> +#define AIC26_REG_FILTER_COEFF_R_N0 AIC26_PAGE_ADDR(2, 0x11)
> +#define AIC26_REG_FILTER_COEFF_R_N1 AIC26_PAGE_ADDR(2, 0x12)
> +#define AIC26_REG_FILTER_COEFF_R_N2 AIC26_PAGE_ADDR(2, 0x13)
> +#define AIC26_REG_FILTER_COEFF_R_N3 AIC26_PAGE_ADDR(2, 0x14)
> +#define AIC26_REG_FILTER_COEFF_R_N4 AIC26_PAGE_ADDR(2, 0x15)
> +#define AIC26_REG_FILTER_COEFF_R_N5 AIC26_PAGE_ADDR(2, 0x16)
> +#define AIC26_REG_FILTER_COEFF_R_D1 AIC26_PAGE_ADDR(2, 0x17)
> +#define AIC26_REG_FILTER_COEFF_R_D2 AIC26_PAGE_ADDR(2, 0x18)
> +#define AIC26_REG_FILTER_COEFF_R_D4 AIC26_PAGE_ADDR(2, 0x19)
> +#define AIC26_REG_FILTER_COEFF_R_D5 AIC26_PAGE_ADDR(2, 0x1A)
> +
> +#define AIC26_REG_PLL_PROG1 AIC26_PAGE_ADDR(2, 0x1B)
> +#define AIC26_REG_PLL_PROG2 AIC26_PAGE_ADDR(2, 0x1C)
> +#define AIC26_REG_AUDIO_CTRL4 AIC26_PAGE_ADDR(2, 0x1D)
> +#define AIC26_REG_AUDIO_CTRL5 AIC26_PAGE_ADDR(2, 0x1E)
> +
> +#define AIC26_RATES (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 |\
> + SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 |\
> + SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 |\
> + SNDRV_PCM_RATE_48000)
> +#define AIC26_FORMATS (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_BE |\
> + SNDRV_PCM_FMTBIT_S24_BE | SNDRV_PCM_FMTBIT_S32_BE)
> +
> +/* fsref dividers; used in register 'Audio Control 1' */
> +enum aic26_divisors {
> + AIC26_DIV_1 = 0,
> + AIC26_DIV_1_5 = 1,
> + AIC26_DIV_2 = 2,
> + AIC26_DIV_3 = 3,
> + AIC26_DIV_4 = 4,
> + AIC26_DIV_5 = 5,
> + AIC26_DIV_5_5 = 6,
> + AIC26_DIV_6 = 7,
> +};
> +
> +/* Digital data format */
> +enum aic26_datfm {
> + AIC26_DATFM_I2S = 0 << 8,
> + AIC26_DATFM_DSP = 1 << 8,
> + AIC26_DATFM_RIGHTJ = 2 << 8, /* right justified */
> + AIC26_DATFM_LEFTJ = 3 << 8, /* left justified */
> +};
> +
> +/* Sample word length in bits; used in register 'Audio Control 1' */
> +enum aic26_wlen {
> + AIC26_WLEN_16 = 0 << 10,
> + AIC26_WLEN_20 = 1 << 10,
> + AIC26_WLEN_24 = 2 << 10,
> + AIC26_WLEN_32 = 3 << 10,
> +};
> +
> +/* AIC26 driver private data */
> +struct aic26 {
> + struct spi_device *spi;
> + struct snd_soc_codec codec;
> + u16 reg_cache[AIC26_REG_CACHE_SIZE]; /* shadow registers */
> + int master;
> + int datfm;
> + int mclk;
> +
> + /* Keyclick parameters */
> + int keyclick_amplitude;
> + int keyclick_freq;
> + int keyclick_len;
> +};
> +
> +/* ---------------------------------------------------------------------
> + * Register access routines
> + */
> +static unsigned int aic26_reg_read(struct snd_soc_codec *codec,
> + unsigned int reg)
> +{
> + struct aic26 *aic26 = codec->private_data;
> + u16 *cache = codec->reg_cache;
> + u16 cmd, value;
> + u8 buffer[2];
> + int rc;
> +
> + if ((reg < 0) || (reg >= AIC26_NUM_REGS)) {
> + WARN_ON_ONCE(1);
> + return 0;
> + }
> +
> + /* Do SPI transfer; first 16bits are command; remaining is
> + * register contents */
> + cmd = AIC26_READ_COMMAND_WORD(reg);
> + buffer[0] = (cmd >> 8) & 0xff;
> + buffer[1] = cmd & 0xff;
> + rc = spi_write_then_read(aic26->spi, buffer, 2, buffer, 2);
> + if (rc) {
> + dev_err(&aic26->spi->dev, "AIC26 reg read error\n");
> + return -EIO;
> + }
> + value = (buffer[0] << 8) | buffer[1];
> +
> + /* Update the cache before returning with the value */
> + if (AIC26_REG_IS_CACHED(reg))
> + cache[AIC26_REG_CACHE_ADDR(reg)] = value;
> + return value;
> +}
> +
> +static unsigned int aic26_reg_read_cache(struct snd_soc_codec *codec,
> + unsigned int reg)
> +{
> + u16 *cache = codec->reg_cache;
> +
> + if ((reg < 0) || (reg >= AIC26_NUM_REGS)) {
> + WARN_ON_ONCE(1);
> + return 0;
> + }
> +
> + if (AIC26_REG_IS_CACHED(reg))
> + return cache[AIC26_REG_CACHE_ADDR(reg)];
> +
> + return aic26_reg_read(codec, reg);
> +}
> +
> +static int aic26_reg_write(struct snd_soc_codec *codec, unsigned int reg,
> + unsigned int value)
> +{
> + struct aic26 *aic26 = codec->private_data;
> + u16 *cache = codec->reg_cache;
> + u16 cmd;
> + u8 buffer[4];
> + int rc;
> +
> + if ((reg < 0) || (reg >= AIC26_NUM_REGS)) {
> + WARN_ON_ONCE(1);
> + return -EINVAL;
> + }
> +
> + /* Do SPI transfer; first 16bits are command; remaining is data
> + * to write into register */
> + cmd = AIC26_WRITE_COMMAND_WORD(reg);
> + buffer[0] = (cmd >> 8) & 0xff;
> + buffer[1] = cmd & 0xff;
> + buffer[2] = value >> 8;
> + buffer[3] = value;
> + rc = spi_write(aic26->spi, buffer, 4);
> + if (rc) {
> + dev_err(&aic26->spi->dev, "AIC26 reg read error\n");
> + return -EIO;
> + }
> +
> + /* update cache before returning */
> + if (AIC26_REG_IS_CACHED(reg))
> + cache[AIC26_REG_CACHE_ADDR(reg)] = value;
> + return 0;
> +}
> +
> +/* ---------------------------------------------------------------------
> + * Digital Audio Interface Operations
> + */
> +static int aic26_hw_params(struct snd_pcm_substream *substream,
> + struct snd_pcm_hw_params *params)
> +{
> + struct snd_soc_pcm_runtime *rtd = substream->private_data;
> + struct snd_soc_device *socdev = rtd->socdev;
> + struct snd_soc_codec *codec = socdev->codec;
> + struct aic26 *aic26 = codec->private_data;
> + int fsref, divisor, wlen, pval, jval, dval, qval;
> + u16 reg;
> +
> + dev_dbg(&aic26->spi->dev, "aic26_hw_params(substream=%p, params=%p)\n",
> + substream, params);
> + dev_dbg(&aic26->spi->dev, "rate=%i format=%i\n", params_rate(params),
> + params_format(params));
> +
> + switch (params_rate(params)) {
> + case 8000: fsref = 48000; divisor = AIC26_DIV_6; break;
> + case 11025: fsref = 44100; divisor = AIC26_DIV_4; break;
> + case 12000: fsref = 48000; divisor = AIC26_DIV_4; break;
> + case 16000: fsref = 48000; divisor = AIC26_DIV_3; break;
> + case 22050: fsref = 44100; divisor = AIC26_DIV_2; break;
> + case 24000: fsref = 48000; divisor = AIC26_DIV_2; break;
> + case 32000: fsref = 48000; divisor = AIC26_DIV_1_5; break;
> + case 44100: fsref = 44100; divisor = AIC26_DIV_1; break;
> + case 48000: fsref = 48000; divisor = AIC26_DIV_1; break;
> + default: dev_dbg(&aic26->spi->dev, "bad rate\n"); return -EINVAL;
> + }
> +
> + /* select data word length */
> + switch (params_format(params)) {
> + case SNDRV_PCM_FORMAT_S8: wlen = AIC26_WLEN_16; break;
> + case SNDRV_PCM_FORMAT_S16_BE: wlen = AIC26_WLEN_16; break;
> + case SNDRV_PCM_FORMAT_S24_BE: wlen = AIC26_WLEN_24; break;
> + case SNDRV_PCM_FORMAT_S32_BE: wlen = AIC26_WLEN_32; break;
> + default: dev_dbg(&aic26->spi->dev, "bad format\n"); return -EINVAL;
> + }
> +
> + /* Configure PLL */
> + pval = 1;
> + jval = (fsref == 44100) ? 7 : 8;
> + dval = (fsref == 44100) ? 5264 : 1920;
> + qval = 0;
> + reg = 0x8000 | qval << 11 | pval << 8 | jval << 2;
> + aic26_reg_write(codec, AIC26_REG_PLL_PROG1, reg);
> + reg = dval << 2;
> + aic26_reg_write(codec, AIC26_REG_PLL_PROG2, reg);
> +
> + /* Power up CODEC */
> + aic26_reg_write(codec, AIC26_REG_POWER_CTRL, 0);
> +
> + /* Audio Control 3 (master mode, fsref rate) */
> + reg = aic26_reg_read_cache(codec, AIC26_REG_AUDIO_CTRL3);
> + reg &= ~0xf800;
> + if (aic26->master)
> + reg |= 0x0800;
> + if (fsref == 48000)
> + reg |= 0x2000;
> + aic26_reg_write(codec, AIC26_REG_AUDIO_CTRL3, reg);
> +
> + /* Audio Control 1 (FSref divisor) */
> + reg = aic26_reg_read_cache(codec, AIC26_REG_AUDIO_CTRL1);
> + reg &= ~0x0fff;
> + reg |= wlen | aic26->datfm | (divisor << 3) | divisor;
> + aic26_reg_write(codec, AIC26_REG_AUDIO_CTRL1, reg);
> +
> + return 0;
> +}
> +
> +/**
> + * aic26_mute - Mute control to reduce noise when changing audio format
> + */
> +static int aic26_mute(struct snd_soc_codec_dai *dai, int mute)
> +{
> + struct snd_soc_codec *codec = dai->codec;
> + struct aic26 *aic26 = codec->private_data;
> + u16 reg = aic26_reg_read_cache(codec, AIC26_REG_DAC_GAIN);
> +
> + dev_dbg(&aic26->spi->dev, "aic26_mute(dai=%p, mute=%i)\n",
> + dai, mute);
> +
> + if (mute)
> + reg |= 0x8080;
> + else
> + reg &= ~0x8080;
> + aic26_reg_write(codec, AIC26_REG_DAC_GAIN, reg);
> +
> + return 0;
> +}
> +
> +static int aic26_set_sysclk(struct snd_soc_codec_dai *codec_dai,
> + int clk_id, unsigned int freq, int dir)
> +{
> + struct snd_soc_codec *codec = codec_dai->codec;
> + struct aic26 *aic26 = codec->private_data;
> +
> + dev_dbg(&aic26->spi->dev, "aic26_set_sysclk(dai=%p, clk_id==%i,"
> + " freq=%i, dir=%i)\n",
> + codec_dai, clk_id, freq, dir);
> +
> + /* MCLK needs to fall between 2MHz and 50 MHz */
> + if ((freq < 2000000) || (freq > 50000000))
> + return -EINVAL;
> +
> + aic26->mclk = freq;
> + return 0;
> +}
> +
> +static int aic26_set_fmt(struct snd_soc_codec_dai *codec_dai, unsigned int fmt)
> +{
> + struct snd_soc_codec *codec = codec_dai->codec;
> + struct aic26 *aic26 = codec->private_data;
> +
> + dev_dbg(&aic26->spi->dev, "aic26_set_fmt(dai=%p, fmt==%i)\n",
> + codec_dai, fmt);
> +
> + /* set master/slave audio interface */
> + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
> + case SND_SOC_DAIFMT_CBM_CFM: aic26->master = 1; break;
> + //case SND_SOC_DAIFMT_CBS_CFS: aic26->master = 0; break;
> + default: dev_dbg(&aic26->spi->dev, "bad master\n"); return -EINVAL;
> + }
> +
> + /* interface format */
> + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
> + case SND_SOC_DAIFMT_I2S: aic26->datfm = AIC26_DATFM_I2S; break;
> + case SND_SOC_DAIFMT_DSP_A: aic26->datfm = AIC26_DATFM_DSP; break;
> + case SND_SOC_DAIFMT_RIGHT_J: aic26->datfm = AIC26_DATFM_RIGHTJ; break;
> + case SND_SOC_DAIFMT_LEFT_J: aic26->datfm = AIC26_DATFM_LEFTJ; break;
> + default: dev_dbg(&aic26->spi->dev, "bad format\n"); return -EINVAL;
> + }
> +
> + return 0;
> +}
> +
> +/* ---------------------------------------------------------------------
> + * Digital Audio Interface Definition
> + */
> +struct snd_soc_codec_dai aic26_dai = {
> + .name = "tlv320aic26",
> + .playback = {
> + .stream_name = "Playback",
> + .channels_min = 2,
> + .channels_max = 2,
> + .rates = AIC26_RATES,
> + .formats = AIC26_FORMATS,
> + },
> + .capture = {
> + .stream_name = "Capture",
> + .channels_min = 2,
> + .channels_max = 2,
> + .rates = AIC26_RATES,
> + .formats = AIC26_FORMATS,
> + },
> + .ops = {
> + .hw_params = aic26_hw_params,
> + },
> + .dai_ops = {
> + .digital_mute = aic26_mute,
> + .set_sysclk = aic26_set_sysclk,
> + .set_fmt = aic26_set_fmt,
> + },
> +};
> +EXPORT_SYMBOL_GPL(aic26_dai);
> +
> +/* ---------------------------------------------------------------------
> + * ALSA controls
> + */
> +static const char *aic26_capture_src_text[] = {"Mic", "Aux"};
> +static const struct soc_enum aic26_capture_src_enum =
> + SOC_ENUM_SINGLE(AIC26_REG_AUDIO_CTRL1, 12,2, aic26_capture_src_text);
> +
> +static const struct snd_kcontrol_new aic26_snd_controls[] = {
> + /* Output */
> + SOC_DOUBLE("PCM Playback Volume", AIC26_REG_DAC_GAIN, 8, 0, 0x7f, 1),
> + SOC_DOUBLE("PCM Playback Switch", AIC26_REG_DAC_GAIN, 15, 7, 1, 1),
> + SOC_SINGLE("PCM Capture Volume", AIC26_REG_ADC_GAIN, 8, 0x7f, 0),
> + SOC_SINGLE("PCM Capture Mute", AIC26_REG_ADC_GAIN, 15, 1, 1),
> + SOC_ENUM("Capture Source", aic26_capture_src_enum),
> +};
> +
> +/* ---------------------------------------------------------------------
> + * SoC CODEC portion of driver: probe and release routines
> + */
> +static int aic26_probe(struct platform_device *pdev)
> +{
> + struct snd_soc_device *socdev = platform_get_drvdata(pdev);
> + struct snd_soc_codec *codec;
> + struct snd_kcontrol *kcontrol;
> + struct aic26 *aic26;
> + int i, ret, err;
> +
> + dev_info(&pdev->dev, "Probing AIC26 SoC CODEC driver\n");
> + dev_dbg(&pdev->dev, "socdev=%p\n", socdev);
> + dev_dbg(&pdev->dev, "codec_data=%p\n", socdev->codec_data);
> +
> + /* Fetch the relevant aic26 private data here (it's already been
> + * stored in the .codec pointer) */
> + aic26 = socdev->codec_data;
> + if (aic26 == NULL) {
> + dev_err(&pdev->dev, "aic26: missing codec pointer\n");
> + return -ENODEV;
> + }
> + codec = &aic26->codec;
> + socdev->codec = codec;
> +
> + dev_dbg(&pdev->dev, "Registering PCMs, dev=%p, socdev->dev=%p\n",
> + &pdev->dev, socdev->dev);
> + /* register pcms */
> + ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
> + if (ret < 0) {
> + dev_err(&pdev->dev, "aic26: failed to create pcms\n");
> + return -ENODEV;
> + }
> +
> + /* register controls */
> + dev_dbg(&pdev->dev, "Registering controls\n");
> + for (i = 0; i < ARRAY_SIZE(aic26_snd_controls); i++) {
> + kcontrol = snd_soc_cnew(&aic26_snd_controls[i], codec, NULL);
> + err = snd_ctl_add(codec->card, kcontrol);
> + WARN_ON(err < 0);
> + }
> +
> + /* CODEC is setup, we can register the card now */
> + dev_dbg(&pdev->dev, "Registering card\n");
> + ret = snd_soc_register_card(socdev);
> + if (ret < 0) {
> + dev_err(&pdev->dev, "aic26: failed to register card\n");
> + goto card_err;
> + }
> + return 0;
> +
> + card_err:
> + snd_soc_free_pcms(socdev);
> + return ret;
> +}
> +
> +static int aic26_remove(struct platform_device *pdev)
> +{
> + struct snd_soc_device *socdev = platform_get_drvdata(pdev);
> + snd_soc_free_pcms(socdev);
> + return 0;
> +}
> +
> +struct snd_soc_codec_device aic26_soc_codec_dev = {
> + .probe = aic26_probe,
> + .remove = aic26_remove,
> +};
> +
> +/* ---------------------------------------------------------------------
> + * SPI device portion of driver: sysfs files for debugging
> + */
> +
> +static ssize_t aic26_regs_show(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + struct aic26 *aic26 = dev_get_drvdata(dev);
> + char *idx = buf;
> + int cache_flag, addr, page, i, reg;
> +
> + cache_flag = (strcmp(attr->attr.name, "regs_cache") == 0);
> +
> + for (page = 0; page < 3; page++) {
> + for (i = 0; i < 0x20; i++) {
> + addr = AIC26_PAGE_ADDR(page, i);
> + if (i % 8 == 0)
> + idx += sprintf(idx, "%i:%.2i:", page,i);
> + if (cache_flag)
> + reg = aic26_reg_read_cache(&aic26->codec, addr);
> + else
> + reg = aic26_reg_read(&aic26->codec, addr);
> + idx += sprintf(idx, " %.4x", reg);
> + if (i % 8 == 7)
> + idx += sprintf(idx, "\n");
> + }
> + }
> + return idx - buf;
> +}
> +
> +static ssize_t aic26_keyclick_show(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + struct aic26 *aic26 = dev_get_drvdata(dev);
> + int val, amp, freq, len;
> +
> + val = aic26_reg_read_cache(&aic26->codec, AIC26_REG_AUDIO_CTRL2);
> + amp = (val >> 12) & 0x7;
> + freq = (125 << ((val >> 8) & 0x7)) >> 1;
> + len = 2 * (1 +((val >> 8) & 0xf));
> +
> + return sprintf(buf, "amp=%x freq=%iHz len=%iclks\n", amp, freq, len);
> +}
> +
> +/* Any write to the keyclick attribute will trigger the keyclick */
> +static ssize_t aic26_keyclick_set(struct device *dev,
> + struct device_attribute *attr,
> + const char *buf, size_t count)
> +{
> + struct aic26 *aic26 = dev_get_drvdata(dev);
> + int val;
> +
> + val = aic26_reg_read_cache(&aic26->codec, AIC26_REG_AUDIO_CTRL2);
> + val |= 0x8000;
> + aic26_reg_write(&aic26->codec, AIC26_REG_AUDIO_CTRL2, val);
> +
> + return count;
> +}
> +
> +DEVICE_ATTR(regs, 0644, aic26_regs_show, NULL);
> +DEVICE_ATTR(regs_cache, 0644, aic26_regs_show, NULL);
> +DEVICE_ATTR(keyclick, 0644, aic26_keyclick_show, aic26_keyclick_set);
> +
> +/* ---------------------------------------------------------------------
> + * SPI device portion of driver: probe and release routines and SPI
> + * driver registration.
> + */
> +static int aic26_spi_probe(struct spi_device *spi)
> +{
> + struct aic26 *aic26;
> + int rc, i, reg;
> +
> + dev_dbg(&spi->dev, "probing tlv320aic26 spi device\n");
> +
> + /* Allocate driver data */
> + aic26 = kzalloc(sizeof *aic26, GFP_KERNEL);
> + if (!aic26)
> + return -ENOMEM;
> +
> + /* Initialize the driver data */
> + aic26->spi = spi;
> + dev_set_drvdata(&spi->dev, aic26);
> +
> + /* Setup what we can in the codec structure so that the register
> + * access functions will work as expected. More will be filled
> + * out when it is probed by the SoC CODEC part of this driver */
> + aic26->codec.private_data = aic26;
> + aic26->codec.name = "aic26";
> + aic26->codec.owner = THIS_MODULE;
> + aic26->codec.dai = &aic26_dai;
> + aic26->codec.num_dai = 1;
> + aic26->codec.read = aic26_reg_read;
> + aic26->codec.write = aic26_reg_write;
> + aic26->master = 1;
> + mutex_init(&aic26->codec.mutex);
> + INIT_LIST_HEAD(&aic26->codec.dapm_widgets);
> + INIT_LIST_HEAD(&aic26->codec.dapm_paths);
> + aic26->codec.reg_cache_size = sizeof(aic26->reg_cache);
> + aic26->codec.reg_cache = aic26->reg_cache;
> +
> + /* Reset the codec to power on defaults */
> + aic26_reg_write(&aic26->codec, AIC26_REG_RESET, 0xBB00);
> +
> + /* Power up CODEC */
> + aic26_reg_write(&aic26->codec, AIC26_REG_POWER_CTRL, 0);
> +
> + /* Audio Control 3 (master mode, fsref rate) */
> + reg = aic26_reg_read(&aic26->codec, AIC26_REG_AUDIO_CTRL3);
> + reg &= ~0xf800;
> + reg |= 0x0800; /* set master mode */
> + aic26_reg_write(&aic26->codec, AIC26_REG_AUDIO_CTRL3, reg);
> +
> + /* Fill page 2 register cache */
> + for (i = 0; i < ARRAY_SIZE(aic26->reg_cache); i++)
> + aic26_reg_read(&aic26->codec, AIC26_PAGE_ADDR(2, i));
> +
> + /* Register the sysfs files for debugging */
> + /* Create SysFS files */
> + rc = device_create_file(&spi->dev, &dev_attr_regs);
> + rc |= device_create_file(&spi->dev, &dev_attr_regs_cache);
> + rc |= device_create_file(&spi->dev, &dev_attr_keyclick);
> + if (rc)
> + dev_info(&spi->dev, "error creating sysfs files\n");
> +
> + /* Tell the of_soc helper about this codec */
> + of_snd_soc_register_codec(&aic26_soc_codec_dev, aic26, &aic26_dai,
> + spi->dev.archdata.of_node);
I've been using asoc-v2 so it may not be possible to make this arch
independent in asoc-v1. Maybe try porting this to asoc-v2 and see if
a bunch of the registration complexity disappears. Most of soc-of.c
should be unnecessary.
Liam, when is asoc-v2 going into mainline?
> +
> + dev_dbg(&spi->dev, "SPI device initialized\n");
> + return 0;
> +}
> +
> +static int aic26_spi_remove(struct spi_device *spi)
> +{
> + struct aic26 *aic26 = dev_get_drvdata(&spi->dev);
> +
> + kfree(aic26);
> +
> + return 0;
> +}
> +
> +static struct spi_driver aic26_spi = {
> + .driver = {
> + .name = "tlv320aic26",
> + .owner = THIS_MODULE,
> + },
> + .probe = aic26_spi_probe,
> + .remove = aic26_spi_remove,
> +};
> +
> +static int __init aic26_init(void)
> +{
> + return spi_register_driver(&aic26_spi);
> +}
> +module_init(aic26_init);
> +
> +static void __exit aic26_exit(void)
> +{
> + spi_unregister_driver(&aic26_spi);
> +}
> +module_exit(aic26_exit);
>
> _______________________________________________
> Alsa-devel mailing list
> Alsa-devel at alsa-project.org
> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
>
--
Jon Smirl
jonsmirl at gmail.com
More information about the Linuxppc-dev
mailing list