[PATCH] powerpc: Xilinx: PS2: Added new XPS PS2 driver

[Peter Korsgaard]

>>>>> "John" == John Linn <john.linn at xilinx.com> writes:

 > Added a new driver for Xilinx XPS PS2 IP. This driver is
 > a flat driver to better match the Linux driver pattern.

This should probably go to the linux-input@ list as well.

 > Signed-off-by: Sadanand <sadanan at xilinx.com>
 > Signed-off-by: John Linn <john.linn at xilinx.com>
 > ---
 >  drivers/input/serio/Kconfig      |    5 +
 >  drivers/input/serio/Makefile     |    1 +
 >  drivers/input/serio/xilinx_ps2.c |  464 ++++++++++++++++++++++++++++++++++++++
 >  drivers/input/serio/xilinx_ps2.h |   97 ++++++++
 >  4 files changed, 567 insertions(+), 0 deletions(-)
 >  create mode 100644 drivers/input/serio/xilinx_ps2.c
 >  create mode 100644 drivers/input/serio/xilinx_ps2.h

 > diff --git a/drivers/input/serio/Kconfig b/drivers/input/serio/Kconfig
 > index ec4b661..0e62b39 100644
 > --- a/drivers/input/serio/Kconfig
 > +++ b/drivers/input/serio/Kconfig
 > @@ -190,4 +190,9 @@ config SERIO_RAW
 >  	  To compile this driver as a module, choose M here: the
 >  	  module will be called serio_raw.
 
 > +config SERIO_XILINX_XPS_PS2
 > +	tristate "Xilinx XPS PS/2 Controller Support"
 > +	help
 > +	  This driver supports XPS PS/2 IP from Xilinx EDK.
 > +
 >  endif
 > diff --git a/drivers/input/serio/Makefile b/drivers/input/serio/Makefile
 > index 38b8868..9b6c813 100644
 > --- a/drivers/input/serio/Makefile
 > +++ b/drivers/input/serio/Makefile
 > @@ -21,3 +21,4 @@ obj-$(CONFIG_SERIO_PCIPS2)	+= pcips2.o
 >  obj-$(CONFIG_SERIO_MACEPS2)	+= maceps2.o
 >  obj-$(CONFIG_SERIO_LIBPS2)	+= libps2.o
 >  obj-$(CONFIG_SERIO_RAW)		+= serio_raw.o
 > +obj-$(CONFIG_SERIO_XILINX_XPS_PS2)	+= xilinx_ps2.o
 > diff --git a/drivers/input/serio/xilinx_ps2.c b/drivers/input/serio/xilinx_ps2.c
 > new file mode 100644
 > index 0000000..670d47f
 > --- /dev/null
 > +++ b/drivers/input/serio/xilinx_ps2.c
 > @@ -0,0 +1,464 @@
 > +/*
 > + * xilinx_ps2.c
 > + *
 > + * Xilinx PS/2 driver to interface PS/2 component to Linux
 > + *
 > + * Author: MontaVista Software, Inc.
 > + *	   source at mvista.com
 > + *
 > + * (c) 2005 MontaVista Software, Inc.
 > + * (c) 2008 Xilinx Inc.
 > + *

Is the montavista stuff still valid?

 > + * This program is free software; you can redistribute it and/or modify it
 > + * under the terms of the GNU General Public License as published by the
 > + * Free Software Foundation; either version 2 of the License, or (at your
 > + * option) any later version.
 > + *
 > + * You should have received a copy of the GNU General Public License along
 > + * with this program; if not, write to the Free Software Foundation, Inc.,
 > + * 675 Mass Ave, Cambridge, MA 02139, USA.
 > + */
 > +
 > +
 > +#include <linux/module.h>
 > +#include <linux/serio.h>
 > +#include <linux/interrupt.h>
 > +#include <linux/errno.h>
 > +#include <linux/init.h>
 > +#include <linux/list.h>
 > +#include <asm/io.h>

linux/io.h please.

 > +
 > +#ifdef CONFIG_OF		/* For open firmware */

Why support !CONFIG_OF? 

 > + #include <linux/of_device.h>
 > + #include <linux/of_platform.h>
 > +#endif /* CONFIG_OF */
 > +
 > +#include "xilinx_ps2.h"

Why the seperate header? You're the only user of it, right?

 > +
 > +#define DRIVER_NAME		"xilinx_ps2"
 > +#define DRIVER_DESCRIPTION	"Xilinx XPS PS/2 driver"
 > +
 > +#define XPS2_NAME_DESC		"Xilinx XPS PS/2 Port #%d"
 > +#define XPS2_PHYS_DESC		"xilinxps2/serio%d"

Why have defines to stuff only used once?

...

 > +
 > +/******************************/
 > +/* The platform device driver */
 > +/******************************/
 > +
 > +static int xps2_probe(struct device *dev)

__devinit please.

 > +{
 > +	struct platform_device *pdev = to_platform_device(dev);
 > +
 > +	struct resource *irq_res = NULL;	/* Interrupt resources */
 > +	struct resource *regs_res = NULL;	/* IO mem resources */
 > +
 > +	if (!dev) {
 > +		dev_err(dev, "Probe called with NULL param\n");
 > +		return -EINVAL;
 > +	}
 > +
 > +	/* Find irq number, map the control registers in */
 > +	irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
 > +	regs_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 > +	return xps2_setup(dev, pdev->id, regs_res, irq_res);
 > +}

...

 > +
 > +/*
 > + * xps2_remove() dissociates the driver with the Xilinx PS/2 device.
 > + */
 > +static int xps2_remove(struct device *dev)

__devexit please.

 > +{
 > +	struct xps2data *drvdata;
 > +
 > +	if (!dev)
 > +		return -EINVAL;
 > +
 > +	drvdata = (struct xps2data *)dev_get_drvdata(dev);
 > +
 > +	serio_unregister_port(&drvdata->serio);
 > +
 > +	iounmap(drvdata->base_address);
 > +
 > +	release_mem_region(drvdata->phys_addr, drvdata->remap_size);
 > +
 > +	kfree(drvdata);
 > +	dev_set_drvdata(dev, NULL);
 > +
 > +	return 0;		/* success */
 > +}
 > +
 > +static struct device_driver xps2_driver = {

Please use a real struct platform_driver instead.

 > +	.name = DRIVER_NAME,
 > +	.bus = &platform_bus_type,
 > +	.probe = xps2_probe,
 > +	.remove = xps2_remove
 > +};
 > +

-- 
Bye, Peter Korsgaard