PCI configuration with multiple PCI controllers

[Sergei Shtylyov]

Hello.

Laurent Lagrange wrote:

> I have a MPC8641 based board. I try to use the two PCIe controllers. My
> firmware configures (physically) the PCI buses as follow:

> ------------------+
> MPC8641 PCIe 1	|	bus 1		+--------------+
> 			| --------------> | PCI device 0 |
> 	BUS 0		|			+--------------+
> - - - - - - - - - +
> MPC8641 PCIe 2	|	bus 3		+--------------+
> 			| --------------> | PCI device 1 |
> 	BUS 2		|			+--------------+
> ------------------+

> I launch the Linux image (2.6.23.9). During the Kernel PCI configuration,
> buses behind the 2nd MPC8641 PCIe are skipped because its primary bus don't
> start at bus number 0. The kernel reconfigure the primary bus number of the
> MPC8641 PCIe 2 controller from 2 to 0.

    Hm...

> I can patch the kernel to work with my firmware but I don't know if my PCI
> configuration is the good one.

> What is the common way to configure the PCI for Linux when a new controller
> is found: start the bus number to 0 or to the last bus number + 1?

    The latter. Otherwise it just won't work.

WBR, Sergei