cpm2-scc-uart on mpc8265 not working
jeff angielski
jeff at theptrgroup.com
Wed Dec 24 05:43:32 EST 2008
On Mon, 2008-12-22 at 15:01 -0600, Scott Wood wrote:
> >
> > cpm at 119c0 {
> > #address-cells = <1>;
> > #size-cells = <1>;
> > compatible = "fsl,mrdig-cpm", "fsl,cpm2";
> > reg = <0x119c0 0x30>;
> > ranges;
> >
> > muram at 0 {
> > #address-cells = <1>;
> > #size-cells = <1>;
> > ranges = <0x0 0x0 0x10000>;
> >
> > data at 0 {
> > compatible = "fsl,cpm-muram-data";
> > reg = <0x0 0x2000 0x9800 0x800>;
> > };
> > };
> >
> > brg at 119f0 {
> > compatible = "fsl,mrdig-brg",
> > "fsl,cpm2-brg",
> > "fsl,cpm-brg";
> > reg = <0x119f0 0x10 0x115f0 0x10>;
> > };
> >
> > /* TODO: I believe the SCCs are setup correctly */
> > /* SCC1 */
> > serial at 11a00 {
> > device_type = "serial";
> > compatible = "fsl,mrdig-scc-uart",
> > "fsl,cpm2-scc-uart";
> > reg = <0x11a00 0x20 0x8000 0x100>;
> > interrupts = <40 8>;
> > interrupt-parent = <&PIC>;
> > fsl,cpm-brg = <1>;
> > fsl,cpm-command = <0x0800000>;
> > };
> >
> > /* SCC2 */
> > serial at 11a20 {
> > device_type = "serial";
> > compatible = "fsl,mrdig-scc-uart",
> > "fsl,cpm2-scc-uart";
> > reg = <0x11a20 0x20 0x8000 0x100>;
> > interrupts = <41 8>;
> > interrupt-parent = <&PIC>;
> > fsl,cpm-brg = <2>;
> > fsl,cpm-command = <0x4a00000>;
> > };
> >
> > /* SCC3 - set this up now or later with SDLC? */
> > serial at 11a40 {
> > device_type = "serial";
> > compatible = "fsl,mrdig-scc-uart",
> > "fsl,cpm2-scc-uart";
> > reg = <0x11a40 0x20 0x8000 0x100>;
> > interrupts = <42 8>;
> > interrupt-parent = <&PIC>;
> > fsl,cpm-brg = <3>;
> > fsl,cpm-command = <0x8c00000>;
> > };
>
> You're assigning the same DPRAM region to all 3 of these serial ports.
> SCC2 is 0x8100, and SCC3 is 0x8200. This is likely your problem.
I fixed up the DPRAM regions.
I also fixed up the muram region which had not been updated for the
mpc8265 - it still had the old mpc8272 definitions.
The kernel does not hang anymore but I still don't see anything on the
serial port. Using an o'scope I can see data on the line, it is just
that bit period is about 560uS - way to slow.
The bootargs have console=ttyCPMO,115200 and I can see the
cpm_uart_console_setup() is trying to set the system to 115kbps. So at
the logical level everything appears ok.
Here is the latest DTS file.
/dts-v1/;
/ {
model = "MRDIG 1.1";
compatible = "mrdig";
#address-cells = <1>;
#size-cells = <1>;
cpus {
#address-cells = <1>;
#size-cells = <0>;
PowerPC,8265 at 0 {
device_type = "cpu";
reg = <0x0>;
d-cache-line-size = <32>;
i-cache-line-size = <32>;
d-cache-size = <16384>;
i-cache-size = <16384>;
/* filled by u-boot */
timebase-frequency = <0>;
bus-frequency = <0>;
clock-frequency = <0>;
};
};
memory {
device_type = "memory";
reg = <0x0 0x0>;
};
localbus at f0010100 {
compatible = "mpc8265-localbus",
"fsl,pq2-localbus";
#address-cells = <2>;
#size-cells = <1>;
reg = <0xf0010100 0x40>;
/*
* BR0 flash
* BR1 sdram - here or in the /memory
* BR2 PCI
* BR3 Sysace
* BR4 CPLD
* BR5 FPGA
* BR6 FPGA
* BR7 FPGA
* BR8 FPGA
* BR9 FPGA
* BR10 AIS
*/
/* TODO: Do we list all ranges?
* TODO: What are correct size?
* TODO: Add FPGA regions
*/
ranges = <0x0 0x0 0xfe000000 0x2000000
0x1 0x0 0xe6000000 0x8000
0x2 0x0 0xe5000000 0x8000
0x3 0x0 0xe4000000 0x8000>;
/* TODO: I think this is right... */
flash at fe000000 {
compatible = "cfi-flash";
reg = <0x0 0xfe000000 0x2000000>;
bank-width = <2>;
device-width = <2>;
};
board-control at 1,0 {
reg = <0x1 0x0 0x20>;
compatible = "mpc8265-bcsr";
};
/* How should this be setup? */
PCI_PIC: interrupt-controller at 3,0 {
compatible = "mpc8265-pci-pic",
"pq2ads-pci-pic";
#interrupt-cells = <1>;
interrupt-controller;
reg = <0x3 0x0 0x8>;
interrupt-parent = <&PIC>;
interrupts = <20 8>;
};
};
pci at f0010800 {
device_type = "pci";
reg = <0xf0010800 0x10c 0xf00101ac 0x8 0xf00101c4 0x8>;
compatible = "mpc8265-pci", "pq2-pci";
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
clock-frequency = <66666666>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
/* TODO: what is the last field of parent */
interrupt-map = <
/* ourself, no IDSEL - cpci slot 1 */
0x0000 0x0 0x0 0x1 &PCI_PIC 0
0x0000 0x0 0x0 0x2 &PCI_PIC 1
0x0000 0x0 0x0 0x3 &PCI_PIC 2
0x0000 0x0 0x0 0x4 &PCI_PIC 3
/* IDSEL 31 - cpci slot 2 */
0xf800 0x0 0x0 0x4 &PCI_PIC 4
0xf800 0x0 0x0 0x1 &PCI_PIC 5
0xf800 0x0 0x0 0x2 &PCI_PIC 6
0xf800 0x0 0x0 0x3 &PCI_PIC 7
/* IDSEL 30 - cpci slot 3 */
0xf000 0x0 0x0 0x3 &PCI_PIC 8
0xf000 0x0 0x0 0x4 &PCI_PIC 9
0xf000 0x0 0x0 0x1 &PCI_PIC 10
0xf000 0x0 0x0 0x2 &PCI_PIC 11
/* IDSEL 29 - cpci slot 4 */
0xe800 0x0 0x0 0x2 &PCI_PIC 12
0xe800 0x0 0x0 0x3 &PCI_PIC 13
0xe800 0x0 0x0 0x4 &PCI_PIC 14
0xe800 0x0 0x0 0x1 &PCI_PIC 15
/* IDSEL 28 - cpci slot 5 */
0xe000 0x0 0x0 0x1 &PCI_PIC 16
0xe000 0x0 0x0 0x2 &PCI_PIC 17
0xe000 0x0 0x0 0x3 &PCI_PIC 18
0xe000 0x0 0x0 0x4 &PCI_PIC 19
/* IDSEL 27 - cpci slot 6 */
0xd800 0x0 0x0 0x4 &PCI_PIC 20
0xd800 0x0 0x0 0x1 &PCI_PIC 21
0xd800 0x0 0x0 0x2 &PCI_PIC 22
0xd800 0x0 0x0 0x3 &PCI_PIC 23
/* IDSEL 26 - cpci slot 7 */
0xd000 0x0 0x0 0x3 &PCI_PIC 24
0xd000 0x0 0x0 0x4 &PCI_PIC 25
0xd000 0x0 0x0 0x1 &PCI_PIC 26
0xd000 0x0 0x0 0x2 &PCI_PIC 27
/* IDSEL 25 - cpci slot 8 */
0xc800 0x0 0x0 0x3 &PCI_PIC 28
0xc800 0x0 0x0 0x4 &PCI_PIC 29
0xc800 0x0 0x0 0x1 &PCI_PIC 30
0xc800 0x0 0x0 0x2 &PCI_PIC 31>;
interrupt-parent = <&PIC>;
interrupts = <18 8>;
/*
* processor view
* local address pci address
* 0x80000000-0x9fffffff 0x800000000-0x9fffffff pci mem (prefetch)
* 0xa0000000-0xbfffffff 0xa00000000-0xbfffffff pci mem
* 0xf4000000-0xf7ffffff 0x800000000-0x03ffffff pci io
*
* PCI master view
* 0x00000000-0x1fffffff 0x000000000-0x1fffffff local phys mem
*/
ranges = <0x42000000 0x0 0x80000000 0x80000000 0x0 0x20000000
0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
0x01000000 0x0 0x00000000 0xf4000000 0x0 0x04000000>;
};
soc at f0000000 {
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
compatible = "mpc8265-soc","pq2-soc";
ranges = <0x0 0xf0000000 0x53000>;
cpm at 119c0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "mpc8265-cpm", "fsl,cpm2";
reg = <0x119c0 0x30>;
ranges;
muram at 0 {
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x0 0x10000>;
data at 0 {
/*
reg = <0x0 0x2000 0x9800 0x800>;
*/
compatible = "fsl,cpm-muram-data";
reg = <0x0 0x6000 0x8000 0x1000 0xb000 0x1000>;
};
};
brg at 119f0 {
compatible = "mpc8265-brg",
"fsl,cpm2-brg",
"fsl,cpm-brg";
reg = <0x119f0 0x10 0x115f0 0x10>;
};
/* TODO: I believe the SCCs are setup correctly */
/* SCC1 */
serial at 11a00 {
device_type = "serial";
compatible = "mpc8265-scc-uart",
"fsl,cpm2-scc-uart";
reg = <0x11a00 0x20 0x8000 0x100>;
interrupts = <40 8>;
interrupt-parent = <&PIC>;
fsl,cpm-brg = <1>;
fsl,cpm-command = <0x0800000>;
};
/* SCC2 */
serial at 11a20 {
device_type = "serial";
compatible = "mpc8265-scc-uart",
"fsl,cpm2-scc-uart";
reg = <0x11a20 0x20 0x8100 0x100>;
interrupts = <41 8>;
interrupt-parent = <&PIC>;
fsl,cpm-brg = <2>;
fsl,cpm-command = <0x4a00000>;
};
/* SCC3 - set this up now or later with SDLC? */
serial at 11a40 {
device_type = "serial";
compatible = "mpc8265-scc-uart",
"fsl,cpm2-scc-uart";
reg = <0x11a40 0x20 0x8200 0x100>;
interrupts = <42 8>;
interrupt-parent = <&PIC>;
fsl,cpm-brg = <3>;
fsl,cpm-command = <0x8c00000>;
};
/* SCC4 */
serial at 11a60 {
device_type = "serial";
compatible = "mpc8265-scc-uart",
"fsl,cpm2-scc-uart";
reg = <0x11a60 0x20 0x8300 0x100>;
interrupts = <43 8>;
interrupt-parent = <&PIC>;
fsl,cpm-brg = <4>;
fsl,cpm-command = <0xce00000>;
};
/* TODO: Figure this out for mrdig */
mdio at 10d40 {
device_type = "mdio";
compatible = "mpc8265-mdio-bitbang",
"cpm2-mdio-bitbang";
reg = <0x10d40 0x14>;
#address-cells = <1>;
#size-cells = <0>;
mdio-pin = <18>;
mdc-pin = <19>;
PHY0: ethernet-phy at 0 {
interrupt-parent = <&PIC>;
interrupts = <23 8>;
reg = <0x0>;
device_type = "ethernet-phy";
};
PHY1: ethernet-phy at 1 {
interrupt-parent = <&PIC>;
interrupts = <23 8>;
reg = <0x3>;
device_type = "ethernet-phy";
};
/* TODO: reg and interrupt? */
PHY2: ethernet-phy at 2 {
interrupt-parent = <&PIC>;
interrupts = <23 8>;
reg = <0x3>;
device_type = "ethernet-phy";
};
};
/* FCC1 */
ethernet at 11300 {
device_type = "network";
compatible = "mpc8265-fcc-enet",
"cpm2-fcc-enet";
reg = <0x11300 0x20 0x8400 0x100 0x11390 0x1>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <32 8>;
interrupt-parent = <&PIC>;
phy-handle = <&PHY0>;
linux,network-index = <0>;
cpm-command = <0x12000300>;
};
/* FCC2 */
ethernet at 11320 {
device_type = "network";
compatible = "mpc8265-fcc-enet",
"cpm2-fcc-enet";
reg = <0x11320 0x20 0x8500 0x100 0x113b0 0x1>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <33 8>;
interrupt-parent = <&PIC>;
phy-handle = <&PHY1>;
linux,network-index = <1>;
cpm-command = <0x16200300>;
};
/* FCC3 */
ethernet at 11340 {
device_type = "network";
compatible = "mpc8265-fcc-enet",
"cpm2-fcc-enet";
reg = <0x11340 0x20 0x8600 0x100 0x113d0 0x1>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <34 8>;
interrupt-parent = <&PIC>;
phy-handle = <&PHY2>;
linux,network-index = <1>;
cpm-command = <0x1ac00300>;
};
i2c at 11860 {
compatible = "mpc8265-i2c", "cpm2-i2c";
reg = <0x11860 0x20 0x8afc 0x2>;
interrupts = <1 8>;
interrupt-parent = <&PIC>;
cpm-command = <0x29600000>;
#address-cells = <1>;
#size-cells = <0>;
};
};
/* TODO: What to do for us? */
PIC: interrupt-controller at 10c00 {
#interrupt-cells = <2>;
interrupt-controller;
reg = <0x10c00 0x80>;
compatible = "mpc8265-pic", "cpm2-pic";
};
};
chosen {
linux,stdout-path = "/soc/cpm/serial at 11a00";
};
};
More information about the Linuxppc-dev
mailing list