[PATCH 11/11] ppc440spe-adma: ADMA driver for PPC440SP(e) systems

Yuri Tikhonov yur at emcraft.com
Tue Dec 9 08:58:14 EST 2008


 Adds the platform device definitions and the architecture specific support
routines for the ppc440spe adma driver.

 Any board equipped with PPC440SP(e) controller may utilize this driver.

Signed-off-by: Yuri Tikhonov <yur at emcraft.com>
Signed-off-by: Ilya Yanok <yanok at emcraft.com>
---
 arch/powerpc/boot/dts/katmai.dts                   |   30 +
 arch/powerpc/include/asm/async_tx.h                |   76 +
 arch/powerpc/include/asm/dcr-regs.h                |   20 +
 arch/powerpc/include/asm/ppc440spe_adma.h          |  177 +
 arch/powerpc/include/asm/ppc440spe_dma.h           |  259 ++
 arch/powerpc/include/asm/ppc440spe_xor.h           |  150 +
 arch/powerpc/platforms/44x/Makefile                |    1 +
 arch/powerpc/platforms/44x/ppc440spe_dma_engines.c |  277 ++
 drivers/dma/Kconfig                                |   13 +
 drivers/dma/Makefile                               |    1 +
 drivers/dma/ppc440spe-adma.c                       | 4142 ++++++++++++++++++++
 11 files changed, 5146 insertions(+), 0 deletions(-)
 create mode 100644 arch/powerpc/include/asm/async_tx.h
 create mode 100644 arch/powerpc/include/asm/ppc440spe_adma.h
 create mode 100644 arch/powerpc/include/asm/ppc440spe_dma.h
 create mode 100644 arch/powerpc/include/asm/ppc440spe_xor.h
 create mode 100644 arch/powerpc/platforms/44x/ppc440spe_dma_engines.c
 create mode 100644 drivers/dma/ppc440spe-adma.c

diff --git a/arch/powerpc/boot/dts/katmai.dts b/arch/powerpc/boot/dts/katmai.dts
index 077819b..2a7c307 100644
--- a/arch/powerpc/boot/dts/katmai.dts
+++ b/arch/powerpc/boot/dts/katmai.dts
@@ -392,6 +392,36 @@
 				0x0 0x0 0x0 0x3 &UIC3 0xa 0x4 /* swizzled int C */
 				0x0 0x0 0x0 0x4 &UIC3 0xb 0x4 /* swizzled int D */>;
 		};
+		DMA0: dma0 {
+			interrupt-parent = <&DMA0>;
+			interrupts = <0 1>;
+			#interrupt-cells = <1>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-map = <
+				0 &UIC0 0x14 4
+				1 &UIC1 0x16 4>;
+		};
+		DMA1: dma1 {
+			interrupt-parent = <&DMA1>;
+			interrupts = <0 1>;
+			#interrupt-cells = <1>;
+			#address-cells = <0>;
+			#size-cells = <0>;
+			interrupt-map = <
+				0 &UIC0 0x16 4
+				1 &UIC1 0x16 4>;
+		};
+		xor {
+			interrupt-parent = <&UIC1>;
+			interrupts = <0x1f 4>;
+		};
+		sysacecf at 4fe000000 {
+			compatible = "xlnx,opb-sysace-1.00.b";
+			interrupt-parent = <&UIC2>;
+			interrupts = <0x19 4>;
+			reg = <0x00000004 0xfe000000 0x100>;
+		};
 	};
 
 	chosen {
diff --git a/arch/powerpc/include/asm/async_tx.h b/arch/powerpc/include/asm/async_tx.h
new file mode 100644
index 0000000..c312a43
--- /dev/null
+++ b/arch/powerpc/include/asm/async_tx.h
@@ -0,0 +1,76 @@
+/*
+ * Copyright(c) 2008 DENX Engineering. All rights reserved.
+ *
+ * Author: Yuri Tikhonov <yur at emcraft.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59
+ * Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called COPYING.
+ */
+#ifndef _PPC_ASYNC_TX_H_
+#define _PPC_ASYNC_TX_H_
+
+#if defined(CONFIG_440SPe) || defined(CONFIG_440SP)
+extern int ppc440spe_adma_estimate (struct dma_chan *chan,
+	enum dma_transaction_type cap, struct page **src_lst,
+	int src_cnt, size_t src_sz);
+#define ppc_adma_estimate(chan, cap, src_lst, src_cnt, src_sz) \
+	ppc440spe_adma_estimate(chan, cap, src_lst, src_cnt, src_sz)
+#endif
+
+struct ppc_dma_chan_ref {
+	struct dma_chan *chan;
+	struct list_head node;
+};
+
+extern struct list_head ppc_adma_chan_list;
+
+/**
+ * ppc_async_tx_find_best_channel - find a channel with the maximum rank for the
+ *	transaction type given (the rank of the operation is the value
+ *	returned by the device_estimate method).
+ * @cap: transaction type
+ * @src_lst: array of pointers to sources for the transaction
+ * @src_cnt: number of arguments (size of the srcs array)
+ * @src_sz: length of the each argument pointed by srcs
+ */
+static inline struct dma_chan *
+ppc_async_tx_find_best_channel (enum dma_transaction_type cap,
+	struct page **src_lst, int src_cnt, size_t src_sz)
+{
+	struct dma_chan *best_chan = NULL;
+	struct ppc_dma_chan_ref *ref;
+	int best_rank = -1;
+
+	list_for_each_entry(ref, &ppc_adma_chan_list, node)
+		if (dma_has_cap(cap, ref->chan->device->cap_mask)) {
+			int rank;
+
+			rank = ppc_adma_estimate (ref->chan,
+				cap, src_lst, src_cnt, src_sz);
+			if (rank > best_rank) {
+				best_rank = rank;
+				best_chan = ref->chan;
+			}
+		}
+
+	return best_chan;
+}
+
+#define async_tx_find_channel(dep, type, dst, dst_count, src, src_count, len) \
+	ppc_async_tx_find_best_channel(type, src, src_count, len)
+
+#endif
diff --git a/arch/powerpc/include/asm/dcr-regs.h b/arch/powerpc/include/asm/dcr-regs.h
index 828e3aa..66dd3b6 100644
--- a/arch/powerpc/include/asm/dcr-regs.h
+++ b/arch/powerpc/include/asm/dcr-regs.h
@@ -157,4 +157,24 @@
 #define  L2C_SNP_SSR_32G	0x0000f000
 #define  L2C_SNP_ESR		0x00000800
 
+#define DCRN_SDR_CONFIG_ADDR	0xe
+#define DCRN_SDR_CONFIG_DATA	0xf
+
+/* I2O/DMA */
+#define DCRN_I2O0_IBAL		0x066
+#define DCRN_I2O0_IBAH		0x067
+#define DCRN_SDR_SRST		0x0200
+#define DCRN_SDR_SRST_I2ODMA	(0x80000000 >> 15)	/* Reset I2O/DMA */
+
+/* 440SP/440SPe XOR DCRs */
+#define DCRN_MQ0_XORBA		0x44
+#define DCRN_MQ0_CF2H		0x46
+#define DCRN_MQ0_CFBHL		0x4f
+#define DCRN_MQ0_BAUH		0x50
+
+/* HB/LL Paths Configuration Register */
+#define MQ0_CFBHL_TPLM		28
+#define MQ0_CFBHL_HBCL		23
+#define MQ0_CFBHL_POLY		15
+
 #endif /* __DCR_REGS_H__ */
diff --git a/arch/powerpc/include/asm/ppc440spe_adma.h b/arch/powerpc/include/asm/ppc440spe_adma.h
new file mode 100644
index 0000000..2a2ab90
--- /dev/null
+++ b/arch/powerpc/include/asm/ppc440spe_adma.h
@@ -0,0 +1,177 @@
+/*
+ * 2006-2007 (C) DENX Software Engineering.
+ *
+ * Author: Yuri Tikhonov <yur at emcraft.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of
+ * any kind, whether express or implied.
+ */
+
+#ifndef PPC440SPE_ADMA_H
+#define PPC440SPE_ADMA_H
+
+#include <linux/types.h>
+#include <asm/ppc440spe_dma.h>
+#include <asm/ppc440spe_xor.h>
+
+#define to_ppc440spe_adma_chan(chan) container_of(chan,ppc440spe_ch_t,common)
+#define to_ppc440spe_adma_device(dev) container_of(dev,ppc440spe_dev_t,common)
+#define tx_to_ppc440spe_adma_slot(tx) container_of(tx,ppc440spe_desc_t,async_tx)
+
+#define PPC440SPE_R6_PROC_ROOT	"driver/440spe_raid6"
+/* Default polynomial (for 440SP is only available) */
+#define PPC440SPE_DEFAULT_POLY	0x4d
+
+#define PPC440SPE_ADMA_ENGINES_NUM	(XOR_ENGINES_NUM + DMA_ENGINES_NUM)
+
+#define PPC440SPE_ADMA_WATCHDOG_MSEC	3
+#define PPC440SPE_ADMA_THRESHOLD	1
+
+#define PPC440SPE_DMA0_ID	0
+#define PPC440SPE_DMA1_ID	1
+#define PPC440SPE_XOR_ID	2
+
+#define PPC440SPE_ADMA_DMA_MAX_BYTE_COUNT	0xFFFFFFUL
+/* this is the XOR_CBBCR width */
+#define PPC440SPE_ADMA_XOR_MAX_BYTE_COUNT	(1 << 31)
+#define PPC440SPE_ADMA_ZERO_SUM_MAX_BYTE_COUNT PPC440SPE_ADMA_XOR_MAX_BYTE_COUNT
+
+#define PPC440SPE_RXOR_RUN	0
+
+#define MQ0_CF2H_RXOR_BS_MASK	0x1FF
+
+#undef ADMA_LL_DEBUG
+
+/**
+ * struct ppc440spe_adma_device - internal representation of an ADMA device
+ * @pdev: Platform device
+ * @id: HW ADMA Device selector
+ * @dma_desc_pool: base of DMA descriptor region (DMA address)
+ * @dma_desc_pool_virt: base of DMA descriptor region (CPU address)
+ * @common: embedded struct dma_device
+ */
+typedef struct ppc440spe_adma_device {
+	struct platform_device *pdev;
+	void *dma_desc_pool_virt;
+
+	int id;
+	dma_addr_t dma_desc_pool;
+	struct dma_device common;
+} ppc440spe_dev_t;
+
+/**
+ * struct ppc440spe_adma_chan - internal representation of an ADMA channel
+ * @lock: serializes enqueue/dequeue operations to the slot pool
+ * @device: parent device
+ * @chain: device chain view of the descriptors
+ * @common: common dmaengine channel object members
+ * @all_slots: complete domain of slots usable by the channel
+ * @pending: allows batching of hardware operations
+ * @completed_cookie: identifier for the most recently completed operation
+ * @slots_allocated: records the actual size of the descriptor slot pool
+ * @hw_chain_inited: h/w descriptor chain initialization flag
+ * @irq_tasklet: bottom half where ppc440spe_adma_slot_cleanup runs
+ * @needs_unmap: if buffers should not be unmapped upon final processing
+ */
+typedef struct ppc440spe_adma_chan {
+	spinlock_t lock;
+	struct ppc440spe_adma_device *device;
+	struct timer_list cleanup_watchdog;
+	struct list_head chain;
+	struct dma_chan common;
+	struct list_head all_slots;
+	struct ppc440spe_adma_desc_slot *last_used;
+	int pending;
+	dma_cookie_t completed_cookie;
+	int slots_allocated;
+	int hw_chain_inited;
+	struct tasklet_struct irq_tasklet;
+	u8 needs_unmap;
+} ppc440spe_ch_t;
+
+typedef struct ppc440spe_rxor {
+	u32 addrl;
+	u32 addrh;
+	int len;
+	int xor_count;
+	int addr_count;
+	int desc_count;
+	int state;
+} ppc440spe_rxor_cursor_t;
+
+/**
+ * struct ppc440spe_adma_desc_slot - PPC440SPE-ADMA software descriptor
+ * @phys: hardware address of the hardware descriptor chain
+ * @group_head: first operation in a transaction
+ * @hw_next: pointer to the next descriptor in chain
+ * @async_tx: support for the async_tx api
+ * @slot_node: node on the iop_adma_chan.all_slots list
+ * @chain_node: node on the op_adma_chan.chain list
+ * @group_list: list of slots that make up a multi-descriptor transaction
+ *      for example transfer lengths larger than the supported hw max
+ * @unmap_len: transaction bytecount
+ * @hw_desc: virtual address of the hardware descriptor chain
+ * @stride: currently chained or not
+ * @idx: pool index
+ * @slot_cnt: total slots used in an transaction (group of operations)
+ * @src_cnt: number of sources set in this descriptor
+ * @dst_cnt: number of destinations set in the descriptor
+ * @slots_per_op: number of slots per operation
+ * @descs_per_op: number of slot per P/Q operation see comment
+ * for ppc440spe_prep_dma_pqxor function
+ * @flags: desc state/type
+ * @reverse_flags: 1 if a corresponding rxor address uses reversed address order
+ * @xor_check_result: result of zero sum
+ * @crc32_result: result crc calculation
+ */
+typedef struct ppc440spe_adma_desc_slot {
+	dma_addr_t phys;
+	struct ppc440spe_adma_desc_slot *group_head;
+	struct ppc440spe_adma_desc_slot *hw_next;
+	struct dma_async_tx_descriptor async_tx;
+	struct list_head slot_node;
+	struct list_head chain_node; /* node in channel ops list */
+	struct list_head group_list; /* list */
+	unsigned int unmap_len;
+	void *hw_desc;
+	u16 stride;
+	u16 idx;
+	u16 slot_cnt;
+	u8 src_cnt;
+	u8 dst_cnt;
+	u8 slots_per_op;
+	u8 descs_per_op;
+	unsigned long flags;
+	unsigned long reverse_flags[8];
+
+#define PPC440SPE_DESC_INT	0	/* generate interrupt on complete */
+#define PPC440SPE_ZERO_P	1	/* clear P destionaion */
+#define PPC440SPE_ZERO_Q	2	/* clear Q destination */
+#define PPC440SPE_COHERENT	3	/* src/dst are coherent */
+
+#define PPC440SPE_DESC_WXOR	4	/* WXORs are in chain */
+#define PPC440SPE_DESC_RXOR	5	/* RXOR is in chain */
+
+#define PPC440SPE_DESC_RXOR123	8	/* CDB for RXOR123 operation */
+#define PPC440SPE_DESC_RXOR124	9	/* CDB for RXOR124 operation */
+#define PPC440SPE_DESC_RXOR125	10	/* CDB for RXOR125 operation */
+#define PPC440SPE_DESC_RXOR12	11	/* CDB for RXOR12 operation */
+#define PPC440SPE_DESC_RXOR_REV	12	/* CDB contains srcs in reversed order */
+#define PPC440SPE_DESC_RXOR_MSK	0x3
+
+	ppc440spe_rxor_cursor_t rxor_cursor;
+
+	union {
+		u32 *xor_check_result;
+		u32 *crc32_result;
+	};
+} ppc440spe_desc_t;
+
+typedef struct ppc440spe_adma_platform_data {
+	int hw_id;
+	dma_cap_mask_t cap_mask;
+	size_t pool_size;
+} ppc440spe_aplat_t;
+
+#endif /* PPC440SPE_ADMA_H */
diff --git a/arch/powerpc/include/asm/ppc440spe_dma.h b/arch/powerpc/include/asm/ppc440spe_dma.h
new file mode 100644
index 0000000..195ed63
--- /dev/null
+++ b/arch/powerpc/include/asm/ppc440spe_dma.h
@@ -0,0 +1,259 @@
+/*
+ * include/asm-ppc/ppc440spe_dma.h
+ *
+ * 440SPe's DMA engines support header file
+ *
+ * 2006 (c) DENX Software Engineering
+ *
+ * Author: Yuri Tikhonov <yur at emcraft.com>
+ *
+ * This file is licensed under the term of  the GNU General Public License
+ * version 2. The program licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#ifndef	PPC440SPE_DMA_H
+#define PPC440SPE_DMA_H
+
+#include <asm/types.h>
+
+/* Number of elements in the array with statical CDBs */
+#define	MAX_STAT_DMA_CDBS	16
+/* Number of DMA engines available on the contoller */
+#define DMA_ENGINES_NUM		2
+
+/* Maximum h/w supported number of destinations */
+#define DMA_DEST_MAX_NUM	2
+
+/* FIFO's params */
+#define DMA0_FIFO_SIZE		0x1000
+#define DMA1_FIFO_SIZE		0x1000
+#define DMA_FIFO_ENABLE		(1<<12)
+
+/* DMA Configuration Register. Data Transfer Engine PLB Priority: */
+#define DMA_CFG_DXEPR_LP	(0<<26)
+#define DMA_CFG_DXEPR_HP	(3<<26)
+#define DMA_CFG_DXEPR_HHP	(2<<26)
+#define DMA_CFG_DXEPR_HHHP	(1<<26)
+
+/* DMA Configuration Register. DMA FIFO Manager PLB Priority: */
+#define DMA_CFG_DFMPP_LP	(0<<23)
+#define DMA_CFG_DFMPP_HP	(3<<23)
+#define DMA_CFG_DFMPP_HHP	(2<<23)
+#define DMA_CFG_DFMPP_HHHP	(1<<23)
+
+/* DMA Configuration Register. Force 64-byte Alignment */
+#define DMA_CFG_FALGN		(1 << 19)
+
+/* I2O Memory Mapped Registers base address */
+#define I2O_MMAP_BASE		0x400100000ULL
+#define I2O_REG_ENABLE		0x1
+#define I2O_MMAP_SIZE		0xF4ULL
+
+/* DMA Memory Mapped Registers base address */
+#define DMA0_MMAP_BASE		0x400100100ULL
+#define DMA1_MMAP_BASE		0x400100200ULL
+#define DMA_MMAP_SIZE		0x80
+
+/* DMA Interrupt Sources, UIC0[20],[22] */
+#define DMA0_CP_FIFO_FULL_IRQ		19
+#define DMA0_CS_FIFO_NEED_SERVICE_IRQ	20
+#define DMA1_CP_FIFO_FULL_IRQ		21
+#define DMA1_CS_FIFO_NEED_SERVICE_IRQ	22
+#define DMA_ERROR_IRQ			54
+
+/*UIC0:*/
+#define D0CPF_INT		(1<<12)
+#define D0CSF_INT		(1<<11)
+#define D1CPF_INT		(1<<10)
+#define D1CSF_INT		(1<<9)
+/*UIC1:*/
+#define DMAE_INT		(1<<9)
+
+/* I2O IOP Interrupt Mask Register */
+#define I2O_IOPIM_P0SNE		(1<<3)
+#define I2O_IOPIM_P0EM		(1<<5)
+#define I2O_IOPIM_P1SNE		(1<<6)
+#define I2O_IOPIM_P1EM		(1<<8)
+
+/* DMA CDB fields */
+#define DMA_CDB_MSK		(0xF)
+#define DMA_CDB_64B_ADDR	(1<<2)
+#define DMA_CDB_NO_INT		(1<<3)
+#define DMA_CDB_STATUS_MSK	(0x3)
+#define DMA_CDB_ADDR_MSK	(0xFFFFFFF0)
+
+/* DMA CDB OpCodes */
+#define DMA_CDB_OPC_NO_OP	(0x00)
+#define DMA_CDB_OPC_MV_SG1_SG2	(0x01)
+#define DMA_CDB_OPC_MULTICAST	(0x05)
+#define DMA_CDB_OPC_DFILL128	(0x24)
+#define DMA_CDB_OPC_DCHECK128	(0x23)
+
+#define DMA_CUED_XOR_BASE	(0x10000000)
+#define DMA_CUED_XOR_HB		(0x00000008)
+
+#ifdef CONFIG_440SP
+#define DMA_CUED_MULT1_OFF	0
+#define DMA_CUED_MULT2_OFF	8
+#define DMA_CUED_MULT3_OFF	16
+#define DMA_CUED_REGION_OFF	24
+#define DMA_CUED_XOR_WIN_MSK	(0xFC000000)
+#else
+#define DMA_CUED_MULT1_OFF	2
+#define DMA_CUED_MULT2_OFF	10
+#define DMA_CUED_MULT3_OFF	18
+#define DMA_CUED_REGION_OFF	26
+#define DMA_CUED_XOR_WIN_MSK	(0xF0000000)
+#endif
+
+#define DMA_CUED_REGION_MSK	0x3
+#define DMA_RXOR123		0x0
+#define DMA_RXOR124		0x1
+#define DMA_RXOR125		0x2
+#define DMA_RXOR12		0x3
+
+/* S/G addresses */
+#define DMA_CDB_SG_SRC		1
+#define DMA_CDB_SG_DST1		2
+#define DMA_CDB_SG_DST2		3
+
+/*
+ * DMAx engines Command Descriptor Block Type
+ */
+typedef struct dma_cdb {
+	/*
+	 * Basic CDB structure (Table 20-17, p.499, 440spe_um_1_22.pdf)
+	 */
+	u8	pad0[2];        /* reserved */
+	u8	attr;		/* attributes */
+	u8	opc;		/* opcode */
+	u32	sg1u;		/* upper SG1 address */
+	u32	sg1l;		/* lower SG1 address */
+	u32	cnt;		/* SG count, 3B used */
+	u32	sg2u;		/* upper SG2 address */
+	u32	sg2l;		/* lower SG2 address */
+	u32	sg3u;		/* upper SG3 address */
+	u32	sg3l;		/* lower SG3 address */
+} dma_cdb_t;
+
+/*
+ * Descriptor of allocated CDB
+ */
+typedef struct {
+	dma_cdb_t		*vaddr;	/* virtual address of CDB */
+	dma_addr_t		paddr;	/* physical address of CDB */
+	/*
+	 * Additional fields
+	 */
+	struct list_head 	link;	/* link in processing list */
+	u32			status;	/* status of the CDB */
+	/* status bits:  */
+	#define	DMA_CDB_DONE	(1<<0)	/* CDB processing competed */
+	#define DMA_CDB_CANCEL	(1<<1)	/* waiting thread was interrupted */
+} dma_cdbd_t;
+
+/*
+ * DMAx hardware registers (p.515 in 440SPe UM 1.22)
+ */
+typedef struct {
+	u32	cpfpl;
+	u32	cpfph;
+	u32	csfpl;
+	u32	csfph;
+	u32	dsts;
+	u32	cfg;
+	u8	pad0[0x8];
+	u16	cpfhp;
+	u16	cpftp;
+	u16	csfhp;
+	u16	csftp;
+	u8	pad1[0x8];
+	u32	acpl;
+	u32	acph;
+	u32	s1bpl;
+	u32	s1bph;
+	u32	s2bpl;
+	u32	s2bph;
+	u32	s3bpl;
+	u32	s3bph;
+	u8	pad2[0x10];
+	u32	earl;
+	u32	earh;
+	u8	pad3[0x8];
+	u32	seat;
+	u32	sead;
+	u32	op;
+	u32	fsiz;
+} dma_regs_t;
+
+/*
+ * I2O hardware registers (p.528 in 440SPe UM 1.22)
+ */
+typedef struct {
+	u32	ists;
+	u32	iseat;
+	u32	isead;
+	u8	pad0[0x14];
+	u32	idbel;
+	u8	pad1[0xc];
+	u32	ihis;
+	u32	ihim;
+	u8	pad2[0x8];
+	u32	ihiq;
+	u32	ihoq;
+	u8	pad3[0x8];
+	u32	iopis;
+	u32	iopim;
+	u32	iopiq;
+	u8	iopoq;
+	u8	pad4[3];
+	u16	iiflh;
+	u16	iiflt;
+	u16	iiplh;
+	u16	iiplt;
+	u16	ioflh;
+	u16	ioflt;
+	u16	ioplh;
+	u16	ioplt;
+	u32	iidc;
+	u32	ictl;
+	u32	ifcpp;
+	u8	pad5[0x4];
+	u16	mfac0;
+	u16	mfac1;
+	u16	mfac2;
+	u16	mfac3;
+	u16	mfac4;
+	u16	mfac5;
+	u16	mfac6;
+	u16	mfac7;
+	u16	ifcfh;
+	u16	ifcht;
+	u8	pad6[0x4];
+	u32	iifmc;
+	u32	iodb;
+	u32	iodbc;
+	u32	ifbal;
+	u32	ifbah;
+	u32	ifsiz;
+	u32	ispd0;
+	u32	ispd1;
+	u32	ispd2;
+	u32	ispd3;
+	u32	ihipl;
+	u32	ihiph;
+	u32	ihopl;
+	u32	ihoph;
+	u32	iiipl;
+	u32	iiiph;
+	u32	iiopl;
+	u32	iioph;
+	u32	ifcpl;
+	u32	ifcph;
+	u8	pad7[0x8];
+	u32	iopt;
+} i2o_regs_t;
+
+#endif /* PPC440SPE_DMA_H */
+
diff --git a/arch/powerpc/include/asm/ppc440spe_xor.h b/arch/powerpc/include/asm/ppc440spe_xor.h
new file mode 100644
index 0000000..946c99d
--- /dev/null
+++ b/arch/powerpc/include/asm/ppc440spe_xor.h
@@ -0,0 +1,150 @@
+/*
+ * include/asm/ppc440spe_xor.h
+ *
+ * 440SPe's XOR engines support header file
+ *
+ * 2006 (c) DENX Software Engineering
+ *
+ * Author: Yuri Tikhonov <yur at emcraft.com>
+ *
+ * This file is licensed under the term of  the GNU General Public License
+ * version 2. The program licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#ifndef PPC440SPE_XOR_H
+#define PPC440SPE_XOR_H
+
+#include <asm/types.h>
+
+/* Number of XOR engines available on the contoller */
+#define XOR_ENGINES_NUM		1
+
+/* Number of operands supported in the h/w */
+#define XOR_MAX_OPS		16
+
+/* XOR Memory Mapped Registers base address is different
+ * for ppc440sp and ppc440spe processors
+ */
+#ifdef CONFIG_440SP
+#define XOR_MMAP_BASE		0x100200000ULL
+#else
+#define XOR_MMAP_BASE		0x400200000ULL
+#endif
+#define XOR_MMAP_SIZE		0x224ULL
+
+/* XOR Interrupt Source, UIC1[31] */
+#define XOR_IRQ			63
+
+/*
+ * XOR Command Block Control Register bits
+ */
+#define XOR_CBCR_LNK_BIT        (1<<31) /* link present */
+#define XOR_CBCR_TGT_BIT        (1<<30) /* target present */
+#define XOR_CBCR_CBCE_BIT       (1<<29) /* command block compete enable */
+#define XOR_CBCR_RNZE_BIT       (1<<28) /* result not zero enable */
+#define XOR_CBCR_XNOR_BIT       (1<<15) /* XOR/XNOR */
+#define XOR_CDCR_OAC_MSK        (0x7F)  /* operand address count */
+
+/*
+ * XORCore Status Register bits
+ */
+#define XOR_SR_XCP_BIT		(1<<31)	/* core processing */
+#define XOR_SR_ICB_BIT		(1<<17)	/* invalid CB */
+#define XOR_SR_IC_BIT		(1<<16)	/* invalid command */
+#define XOR_SR_IPE_BIT		(1<<15)	/* internal parity error */
+#define XOR_SR_RNZ_BIT		(1<<2)	/* result not Zero */
+#define XOR_SR_CBC_BIT		(1<<1)	/* CB complete */
+#define XOR_SR_CBLC_BIT		(1<<0)	/* CB list complete */
+
+/*
+ * XORCore Control Set and Reset Register bits
+ */
+#define XOR_CRSR_XASR_BIT	(1<<31)	/* soft reset */
+#define XOR_CRSR_XAE_BIT	(1<<30)	/* enable */
+#define XOR_CRSR_RCBE_BIT	(1<<29)	/* refetch CB enable */
+#define XOR_CRSR_PAUS_BIT	(1<<28)	/* pause */
+#define XOR_CRSR_64BA_BIT	(1<<27) /* 64/32 CB format */
+#define XOR_CRSR_CLP_BIT	(1<<25)	/* continue list processing */
+
+/*
+ * XORCore Interrupt Enable Register
+ */
+#define XOR_IE_ICBIE_BIT	(1<<17)	/* Invalid Command Block Interrupt Enable */
+#define XOR_IE_ICIE_BIT		(1<<16)	/* Invalid Command Interrupt Enable */
+#define XOR_IE_RPTIE_BIT	(1<<14)	/* Read PLB Timeout Error Interrupt Enable */
+#define XOR_IE_CBCIE_BIT	(1<<1)	/* CB complete interrupt enable */
+#define XOR_IE_CBLCI_BIT	(1<<0)	/* CB list complete interrupt enable */
+
+/*
+ * XOR Accelerator engine Command Block Type
+ */
+typedef struct {
+	/*
+	 * Basic 64-bit format XOR CB (Table 19-1, p.463, 440spe_um_1_22.pdf)
+	 */
+	u32	cbc;		/* control */
+	u32	cbbc;		/* byte count */
+	u32	cbs;		/* status */
+	u8	pad0[4];	/* reserved */
+	u32	cbtah;		/* target address high */
+	u32	cbtal;		/* target address low */
+	u32	cblah;		/* link address high */
+	u32	cblal;		/* link address low */
+	struct {
+		u32 h;
+		u32 l;
+	} __attribute__ ((packed)) ops [16];
+} __attribute__ ((packed)) xor_cb_t;
+
+typedef struct {
+	xor_cb_t		*vaddr;
+	dma_addr_t		paddr;
+
+	/*
+	 * Additional fields
+	 */
+	struct list_head	link;	/* link to processing CBs */
+	u32			status;	/* status of the CB */
+	/* status bits: */
+	#define XOR_CB_DONE	(1<<0)	/* CB processing competed */
+	#define XOR_CB_CANCEL	(1<<1)	/* waiting thread was interrupted */
+#if 0
+	#define XOR_CB_STALLOC	(1<<2)	/* CB allocated statically */
+#endif
+} xor_cbd_t;
+
+
+/*
+ * XOR hardware registers Table 19-3, UM 1.22
+ */
+typedef struct {
+	u32	op_ar[16][2];	/* operand address[0]-high,[1]-low registers */
+	u8	pad0[352];	/* reserved */
+	u32	cbcr;		/* CB control register */
+	u32	cbbcr;		/* CB byte count register */
+	u32	cbsr;		/* CB status register */
+	u8	pad1[4];	/* reserved */
+	u32	cbtahr;		/* operand target address high register */
+	u32	cbtalr;		/* operand target address low register */
+	u32	cblahr;		/* CB link address high register */
+	u32	cblalr;		/* CB link address low register */
+	u32	crsr;		/* control set register */
+	u32	crrr;		/* control reset register */
+	u32	ccbahr;		/* current CB address high register */
+	u32	ccbalr;		/* current CB address low register */
+	u32	plbr;		/* PLB configuration register */
+	u32	ier;		/* interrupt enable register */
+	u32	pecr;		/* parity error count register */
+	u32	sr;		/* status register */
+	u32	revidr;		/* revision ID register */
+} xor_regs_t;
+
+/*
+ * Prototypes
+ */
+int init_xor_eng(void);
+int spe440_xor_block (unsigned int ops_count, unsigned int op_len, void **ops);
+
+#endif /* PPC440SPE_XOR_H */
+
diff --git a/arch/powerpc/platforms/44x/Makefile b/arch/powerpc/platforms/44x/Makefile
index 6981331..abf1d6b 100644
--- a/arch/powerpc/platforms/44x/Makefile
+++ b/arch/powerpc/platforms/44x/Makefile
@@ -5,3 +5,4 @@ obj-$(CONFIG_SAM440EP) 	+= sam440ep.o
 obj-$(CONFIG_WARP)	+= warp.o
 obj-$(CONFIG_WARP)	+= warp-nand.o
 obj-$(CONFIG_XILINX_VIRTEX_5_FXT) += virtex.o
+obj-$(CONFIG_AMCC_PPC440SPE_ADMA) += ppc440spe_dma_engines.o
diff --git a/arch/powerpc/platforms/44x/ppc440spe_dma_engines.c b/arch/powerpc/platforms/44x/ppc440spe_dma_engines.c
new file mode 100644
index 0000000..7968bb3
--- /dev/null
+++ b/arch/powerpc/platforms/44x/ppc440spe_dma_engines.c
@@ -0,0 +1,277 @@
+/*
+ * PPC440SP & PPC440SPE DMA engines description
+ *
+ * Yuri Tikhonov <yur at emcraft.com>
+ * Copyright (c) 2007 DENX Engineering.  All rights reserved.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/async_tx.h>
+#include <linux/platform_device.h>
+
+#include <asm/ppc440spe_adma.h>
+#include <asm/dcr.h>
+#include <asm/dcr-regs.h>
+
+static u64 ppc440spe_adma_dmamask = DMA_32BIT_MASK;
+
+/* DMA and XOR platform devices' resources */
+static struct resource ppc440spe_dma_0_resources[] = {
+	{
+		.flags = IORESOURCE_MEM,
+		.start = DMA0_MMAP_BASE,
+		.end = DMA0_MMAP_BASE + DMA_MMAP_SIZE - 1
+	}
+};
+
+static struct resource ppc440spe_dma_1_resources[] = {
+	{
+		.flags = IORESOURCE_MEM,
+		.start = DMA1_MMAP_BASE,
+		.end = DMA1_MMAP_BASE + DMA_MMAP_SIZE - 1
+	}
+};
+
+static struct resource ppc440spe_xor_resources[] = {
+	{
+		.flags = IORESOURCE_MEM,
+		.start = XOR_MMAP_BASE,
+		.end = XOR_MMAP_BASE + XOR_MMAP_SIZE -1
+	}
+};
+
+/* DMA and XOR platform devices' data */
+
+/* DMA0,1 engines use FIFO to maintain CDBs, so we
+ * should allocate the pool accordingly to size of this
+ * FIFO. Thus, the pool size depends on the FIFO depth:
+ * how much CDBs pointers FIFO may contaun then so much
+ * CDBs we should provide in pool.
+ * That is
+ *   CDB size = 32B;
+ *   CDBs number = (DMA0_FIFO_SIZE >> 3);
+ *   Pool size = CDBs number * CDB size =
+ *      = (DMA0_FIFO_SIZE >> 3) << 5 = DMA0_FIFO_SIZE << 2.
+ *
+ *  As far as the XOR engine is concerned, it does not
+ * use FIFOs but uses linked list. So there is no dependency
+ * between pool size to allocate and the engine configuration.
+ */
+static struct ppc440spe_adma_platform_data ppc440spe_dma_0_data = {
+	.hw_id  = PPC440SPE_DMA0_ID,
+	.pool_size = DMA0_FIFO_SIZE << 2,
+};
+
+static struct ppc440spe_adma_platform_data ppc440spe_dma_1_data = {
+	.hw_id  = PPC440SPE_DMA1_ID,
+	.pool_size = DMA0_FIFO_SIZE << 2,
+};
+
+static struct ppc440spe_adma_platform_data ppc440spe_xor_data = {
+	.hw_id  = PPC440SPE_XOR_ID,
+	.pool_size = PAGE_SIZE << 1,
+};
+
+/* DMA and XOR platform devices definitions */
+static struct platform_device ppc440spe_dma_0_channel = {
+	.name = "PPC440SP(E)-ADMA",
+	.id = PPC440SPE_DMA0_ID,
+	.num_resources = ARRAY_SIZE(ppc440spe_dma_0_resources),
+	.resource = ppc440spe_dma_0_resources,
+	.dev = {
+		.dma_mask = &ppc440spe_adma_dmamask,
+		.coherent_dma_mask = DMA_64BIT_MASK,
+		.platform_data = (void *) &ppc440spe_dma_0_data,
+	},
+};
+
+static struct platform_device ppc440spe_dma_1_channel = {
+	.name = "PPC440SP(E)-ADMA",
+	.id = PPC440SPE_DMA1_ID,
+	.num_resources = ARRAY_SIZE(ppc440spe_dma_1_resources),
+	.resource = ppc440spe_dma_1_resources,
+	.dev = {
+		.dma_mask = &ppc440spe_adma_dmamask,
+		.coherent_dma_mask = DMA_64BIT_MASK,
+		.platform_data = (void *) &ppc440spe_dma_1_data,
+	},
+};
+
+static struct platform_device ppc440spe_xor_channel = {
+	.name = "PPC440SP(E)-ADMA",
+	.id = PPC440SPE_XOR_ID,
+	.num_resources = ARRAY_SIZE(ppc440spe_xor_resources),
+	.resource = ppc440spe_xor_resources,
+	.dev = {
+		.dma_mask = &ppc440spe_adma_dmamask,
+		.coherent_dma_mask = DMA_64BIT_MASK,
+		.platform_data = (void *) &ppc440spe_xor_data,
+	},
+};
+
+/*
+ *  Init DMA0/1 and XOR engines; allocate memory for DMAx FIFOs; set platform_device
+ * memory resources addresses
+ */
+static void ppc440spe_configure_raid_devices(void)
+{
+	void *fifo_buf;
+	volatile i2o_regs_t *i2o_reg;
+	volatile dma_regs_t *dma_reg0, *dma_reg1;
+	volatile xor_regs_t *xor_reg;
+	u32 mask;
+
+	/*
+	 * Map registers and allocate fifo buffer
+	 */
+	if (!(i2o_reg  = ioremap(I2O_MMAP_BASE, I2O_MMAP_SIZE))) {
+		printk(KERN_ERR "I2O registers mapping failed.\n");
+		return;
+	}
+	if (!(dma_reg0 = ioremap(DMA0_MMAP_BASE, DMA_MMAP_SIZE))) {
+		printk(KERN_ERR "DMA0 registers mapping failed.\n");
+		goto err1;
+	}
+	if (!(dma_reg1 = ioremap(DMA1_MMAP_BASE, DMA_MMAP_SIZE))) {
+		printk(KERN_ERR "DMA1 registers mapping failed.\n");
+		goto err2;
+	}
+	if (!(xor_reg  = ioremap(XOR_MMAP_BASE,XOR_MMAP_SIZE))) {
+		printk(KERN_ERR "XOR registers mapping failed.\n");
+		goto err3;
+	}
+
+	/*  Provide memory regions for DMA's FIFOs: I2O, DMA0 and DMA1 share
+	 * the base address of FIFO memory space.
+	 *  Actually we need twice more physical memory than programmed in the
+	 * <fsiz> register (because there are two FIFOs foreach DMA: CP and CS)
+	 */
+	fifo_buf = kmalloc((DMA0_FIFO_SIZE + DMA1_FIFO_SIZE)<<1, GFP_KERNEL);
+	if (!fifo_buf) {
+		printk(KERN_ERR "DMA FIFO buffer allocating failed.\n");
+		goto err4;
+	}
+
+	/*
+	 * Configure h/w
+	 */
+	/* Reset I2O/DMA */
+	mtdcri(SDR, DCRN_SDR_SRST, DCRN_SDR_SRST_I2ODMA);
+	mtdcri(SDR, DCRN_SDR_SRST, 0);
+
+	/* Reset XOR */
+	xor_reg->crsr = XOR_CRSR_XASR_BIT;
+	xor_reg->crrr = XOR_CRSR_64BA_BIT;
+
+	/* Setup the base address of mmaped registers */
+	mtdcr(DCRN_I2O0_IBAH, (u32)(I2O_MMAP_BASE >> 32));
+	mtdcr(DCRN_I2O0_IBAL, (u32)(I2O_MMAP_BASE) | I2O_REG_ENABLE);
+
+	/* SetUp FIFO memory space base address */
+	out_le32(&i2o_reg->ifbah, 0);
+	out_le32(&i2o_reg->ifbal, ((u32)__pa(fifo_buf)));
+
+	/* set zero FIFO size for I2O, so the whole fifo_buf is used by DMAs.
+	 * DMA0_FIFO_SIZE is defined in bytes, <fsiz> - in number of CDB pointers (8byte).
+	 * DMA FIFO Length = CSlength + CPlength, where
+	 *  CSlength = CPlength = (fsiz + 1) * 8.
+	 */
+	out_le32(&i2o_reg->ifsiz, 0);
+	out_le32(&dma_reg0->fsiz, DMA_FIFO_ENABLE | ((DMA0_FIFO_SIZE>>3) - 2));
+	out_le32(&dma_reg1->fsiz, DMA_FIFO_ENABLE | ((DMA1_FIFO_SIZE>>3) - 2));
+	/* Configure DMA engine */
+	out_le32(&dma_reg0->cfg, DMA_CFG_DXEPR_HP | DMA_CFG_DFMPP_HP | DMA_CFG_FALGN);
+	out_le32(&dma_reg1->cfg, DMA_CFG_DXEPR_HP | DMA_CFG_DFMPP_HP | DMA_CFG_FALGN);
+
+	/* Clear Status */
+	out_le32(&dma_reg0->dsts, ~0);
+	out_le32(&dma_reg1->dsts, ~0);
+
+	/*
+	 * Prepare WXOR/RXOR (finally it is being enabled via /proc interface of
+	 * the ppc440spe ADMA driver)
+	 */
+	/* Set HB alias */
+	mtdcr(DCRN_MQ0_BAUH, DMA_CUED_XOR_HB);
+
+	/* Set:
+	 * - LL transaction passing limit to 1;
+	 * - Memory controller cycle limit to 1;
+	 * - Galois Polynomial to 0x14d (default)
+	 */
+	mtdcr(DCRN_MQ0_CFBHL, (1 << MQ0_CFBHL_TPLM) |
+			      (1 << MQ0_CFBHL_HBCL) |
+			      (PPC440SPE_DEFAULT_POLY << MQ0_CFBHL_POLY));
+
+	/* Unmask 'CS FIFO Attention' interrupts and
+	 * enable generating interrupts on errors
+	 */
+	mask = in_le32(&i2o_reg->iopim) & ~(
+		I2O_IOPIM_P0SNE | I2O_IOPIM_P1SNE |
+		I2O_IOPIM_P0EM | I2O_IOPIM_P1EM);
+	out_le32(&i2o_reg->iopim, mask);
+
+	/* enable XOR engine interrupts */
+	xor_reg->ier = XOR_IE_CBCIE_BIT |
+		 XOR_IE_ICBIE_BIT | XOR_IE_ICIE_BIT | XOR_IE_RPTIE_BIT;
+
+	/*
+	 * Unmap registers
+	 */
+	iounmap(i2o_reg);
+	iounmap(xor_reg);
+	iounmap(dma_reg1);
+	iounmap(dma_reg0);
+
+	/*
+	 * Set resource addresses
+	 */
+	dma_cap_set(DMA_MEMCPY, ppc440spe_dma_0_data.cap_mask);
+	dma_cap_set(DMA_INTERRUPT, ppc440spe_dma_0_data.cap_mask);
+	dma_cap_set(DMA_MEMSET, ppc440spe_dma_0_data.cap_mask);
+	dma_cap_set(DMA_PQ, ppc440spe_dma_0_data.cap_mask);
+	dma_cap_set(DMA_PQ_ZERO_SUM, ppc440spe_dma_0_data.cap_mask);
+
+	dma_cap_set(DMA_MEMCPY, ppc440spe_dma_1_data.cap_mask);
+	dma_cap_set(DMA_INTERRUPT, ppc440spe_dma_1_data.cap_mask);
+	dma_cap_set(DMA_MEMSET, ppc440spe_dma_1_data.cap_mask);
+	dma_cap_set(DMA_PQ, ppc440spe_dma_1_data.cap_mask);
+	dma_cap_set(DMA_PQ_ZERO_SUM, ppc440spe_dma_1_data.cap_mask);
+
+	dma_cap_set(DMA_XOR, ppc440spe_xor_data.cap_mask);
+	dma_cap_set(DMA_PQ, ppc440spe_xor_data.cap_mask);
+	dma_cap_set(DMA_INTERRUPT, ppc440spe_xor_data.cap_mask);
+
+	return;
+err4:
+	iounmap(xor_reg);
+err3:
+	iounmap(dma_reg1);
+err2:
+	iounmap(dma_reg0);
+err1:
+	iounmap(i2o_reg);
+	return;
+}
+
+static struct platform_device *ppc440spe_devs[] __initdata = {
+	&ppc440spe_dma_0_channel,
+	&ppc440spe_dma_1_channel,
+	&ppc440spe_xor_channel,
+};
+
+static int __init ppc440spe_register_raid_devices(void)
+{
+	ppc440spe_configure_raid_devices();
+	platform_add_devices(ppc440spe_devs, ARRAY_SIZE(ppc440spe_devs));
+
+	return 0;
+}
+
+arch_initcall(ppc440spe_register_raid_devices);
diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index 904e575..8cc963a 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -64,6 +64,19 @@ config MV_XOR
 	---help---
 	  Enable support for the Marvell XOR engine.
 
+config AMCC_PPC440SPE_ADMA
+	tristate "AMCC PPC440SPe ADMA support"
+	depends on 440SPe || 440SP
+	select ASYNC_CORE
+	select DMA_ENGINE
+	select ARCH_HAS_ASYNC_TX_FIND_CHANNEL
+	default y
+	---help---
+	  Enable support for the AMCC PPC440SPe RAID engines.
+
+config ARCH_HAS_ASYNC_TX_FIND_CHANNEL
+	bool
+
 config DMA_ENGINE
 	bool
 
diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile
index 14f5952..1b7b2c6 100644
--- a/drivers/dma/Makefile
+++ b/drivers/dma/Makefile
@@ -7,3 +7,4 @@ obj-$(CONFIG_INTEL_IOP_ADMA) += iop-adma.o
 obj-$(CONFIG_FSL_DMA) += fsldma.o
 obj-$(CONFIG_MV_XOR) += mv_xor.o
 obj-$(CONFIG_DW_DMAC) += dw_dmac.o
+obj-$(CONFIG_AMCC_PPC440SPE_ADMA) += ppc440spe-adma.o
diff --git a/drivers/dma/ppc440spe-adma.c b/drivers/dma/ppc440spe-adma.c
new file mode 100644
index 0000000..355dd05
--- /dev/null
+++ b/drivers/dma/ppc440spe-adma.c
@@ -0,0 +1,4142 @@
+/*
+ * Copyright(c) 2006 DENX Engineering. All rights reserved.
+ *
+ * Author: Yuri Tikhonov <yur at emcraft.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59
+ * Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called COPYING.
+ */
+
+/*
+ *  This driver supports the asynchrounous DMA copy and RAID engines available
+ * on the AMCC PPC440SPe Processors.
+ *  Based on the Intel Xscale(R) family of I/O Processors (IOP 32x, 33x, 134x)
+ * ADMA driver written by D.Williams.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/async_tx.h>
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/uaccess.h>
+#include <linux/proc_fs.h>
+#include <asm/ppc440spe_adma.h>
+#include <asm/dcr.h>
+#include <asm/dcr-regs.h>
+#include <linux/of.h>
+
+enum ppc_adma_init_code {
+	PPC_ADMA_INIT_OK = 0,
+	PPC_ADMA_INIT_MEMRES,
+	PPC_ADMA_INIT_MEMREG,
+	PPC_ADMA_INIT_ALLOC,
+	PPC_ADMA_INIT_COHERENT,
+	PPC_ADMA_INIT_CHANNEL,
+	PPC_ADMA_INIT_IRQ1,
+	PPC_ADMA_INIT_IRQ2,
+	PPC_ADMA_INIT_REGISTER
+};
+
+static char *ppc_adma_errors[] = {
+	[PPC_ADMA_INIT_OK] = "ok",
+	[PPC_ADMA_INIT_MEMRES] = "failed to get memory resource",
+	[PPC_ADMA_INIT_MEMREG] = "failed to request memory region",
+	[PPC_ADMA_INIT_ALLOC] = "failed to allocate memory for adev "
+		"structure",
+	[PPC_ADMA_INIT_COHERENT] = "failed to allocate coherent memory for "
+		"hardware descriptors",
+	[PPC_ADMA_INIT_CHANNEL] = "failed to allocate memory for channel",
+	[PPC_ADMA_INIT_IRQ1] = "failed to request first irq",
+	[PPC_ADMA_INIT_IRQ2] = "failed to request second irq",
+	[PPC_ADMA_INIT_REGISTER] = "failed to register dma async device",
+};
+
+static enum ppc_adma_init_code ppc_adma_devices[PPC440SPE_ADMA_ENGINES_NUM];
+
+/* The list of channels exported by ppc440spe ADMA */
+struct list_head
+ppc_adma_chan_list = LIST_HEAD_INIT(ppc_adma_chan_list);
+
+/* This flag is set when want to refetch the xor chain in the interrupt
+ *	handler
+ */
+static u32 do_xor_refetch = 0;
+
+/* Pointers to last submitted to DMA0, DMA1 CDBs */
+static ppc440spe_desc_t *chan_last_sub[3];
+static ppc440spe_desc_t *chan_first_cdb[3];
+
+/* Pointer to last linked and submitted xor CB */
+static ppc440spe_desc_t *xor_last_linked = NULL;
+static ppc440spe_desc_t *xor_last_submit = NULL;
+
+/* This array is used in data-check operations for storing a pattern */
+static char ppc440spe_qword[16];
+
+static void *dma_regs[3];
+
+/* Since RXOR operations use the common register (MQ0_CF2H) for setting-up
+ * the block size in transactions, then we do not allow to activate more than
+ * only one RXOR transactions simultaneously. So use this var to store
+ * the information about is RXOR currently active (PPC440SPE_RXOR_RUN bit is
+ * set) or not (PPC440SPE_RXOR_RUN is clear).
+ */
+static unsigned long ppc440spe_rxor_state;
+
+/* /proc interface is used here to enable the h/w RAID-6 capabilities
+ */
+static struct proc_dir_entry *ppc440spe_proot;
+
+/* These are used in enable & check routines
+ */
+static u32 ppc440spe_r6_enabled;
+static ppc440spe_ch_t *ppc440spe_r6_tchan;
+static struct completion ppc440spe_r6_test_comp;
+
+static int ppc440spe_adma_dma2rxor_prep_src (ppc440spe_desc_t *desc,
+		ppc440spe_rxor_cursor_t *cursor, int index,
+		int src_cnt, u32 addr);
+static void ppc440spe_adma_dma2rxor_set_src (ppc440spe_desc_t *desc,
+		int index, dma_addr_t addr);
+static void ppc440spe_adma_dma2rxor_set_mult (ppc440spe_desc_t *desc,
+		int index, u8 mult);
+
+#ifdef ADMA_LL_DEBUG
+static void print_cb (ppc440spe_ch_t *chan, void *block)
+{
+	struct dma_cdb *cdb;
+	xor_cb_t *cb;
+	int i;
+
+	switch (chan->device->id) {
+	case 0:
+	case 1:
+		cdb = block;
+
+		printk("CDB at %p [%d]:\n"
+			"\t attr 0x%02x opc 0x%02x cnt 0x%08x\n"
+			"\t sg1u 0x%08x sg1l 0x%08x\n"
+			"\t sg2u 0x%08x sg2l 0x%08x\n"
+			"\t sg3u 0x%08x sg3l 0x%08x\n",
+			cdb, chan->device->id,
+			cdb->attr, cdb->opc, le32_to_cpu(cdb->cnt),
+			le32_to_cpu(cdb->sg1u), le32_to_cpu(cdb->sg1l),
+			le32_to_cpu(cdb->sg2u), le32_to_cpu(cdb->sg2l),
+			le32_to_cpu(cdb->sg3u), le32_to_cpu(cdb->sg3l)
+		);
+		break;
+	case 2:
+		cb = block;
+
+		printk("CB at %p [%d]:\n"
+			"\t cbc 0x%08x cbbc 0x%08x cbs 0x%08x\n"
+			"\t cbtah 0x%08x cbtal 0x%08x\n"
+			"\t cblah 0x%08x cblal 0x%08x\n",
+			cb, chan->device->id,
+			cb->cbc, cb->cbbc, cb->cbs,
+			cb->cbtah, cb->cbtal,
+			cb->cblah, cb->cblal);
+		for (i=0; i<16; i++) {
+			if (i && !cb->ops[i].h && !cb->ops[i].l)
+				continue;
+			printk("\t ops[%2d]: h 0x%08x l 0x%08x\n",
+				i, cb->ops[i].h, cb->ops[i].l);
+		}
+		break;
+	}
+}
+#endif
+
+/******************************************************************************
+ * Command (Descriptor) Blocks low-level routines
+ ******************************************************************************/
+/**
+ * ppc440spe_desc_init_interrupt - initialize the descriptor for INTERRUPT
+ * pseudo operation
+ */
+static inline void ppc440spe_desc_init_interrupt (ppc440spe_desc_t *desc,
+							ppc440spe_ch_t *chan)
+{
+	xor_cb_t *p;
+
+	switch (chan->device->id) {
+	case PPC440SPE_XOR_ID:
+		p = desc->hw_desc;
+		memset (desc->hw_desc, 0, sizeof(xor_cb_t));
+		/* NOP with Command Block Complete Enable */
+		p->cbc = XOR_CBCR_CBCE_BIT;
+		break;
+	case PPC440SPE_DMA0_ID:
+	case PPC440SPE_DMA1_ID:
+		memset (desc->hw_desc, 0, sizeof(dma_cdb_t));
+		/* NOP with interrupt */
+		set_bit(PPC440SPE_DESC_INT, &desc->flags);
+		break;
+	default:
+		printk(KERN_ERR "Unsupported id %d in %s\n", chan->device->id,
+				__FUNCTION__);
+		break;
+	}
+}
+
+/**
+ * ppc440spe_desc_init_null_xor - initialize the descriptor for NULL XOR
+ * pseudo operation
+ */
+static inline void ppc440spe_desc_init_null_xor(ppc440spe_desc_t *desc)
+{
+	memset (desc->hw_desc, 0, sizeof(xor_cb_t));
+	desc->hw_next = NULL;
+	desc->src_cnt = 0;
+	desc->dst_cnt = 1;
+}
+
+/**
+ * ppc440spe_desc_init_xor - initialize the descriptor for XOR operation
+ */
+static inline void ppc440spe_desc_init_xor(ppc440spe_desc_t *desc, int src_cnt,
+		unsigned long flags)
+{
+	xor_cb_t *hw_desc = desc->hw_desc;
+
+	memset (desc->hw_desc, 0, sizeof(xor_cb_t));
+	desc->hw_next = NULL;
+	desc->src_cnt = src_cnt;
+	desc->dst_cnt = 1;
+
+	hw_desc->cbc = XOR_CBCR_TGT_BIT | src_cnt;
+	if (flags & DMA_PREP_INTERRUPT)
+		/* Enable interrupt on complete */
+		hw_desc->cbc |= XOR_CBCR_CBCE_BIT;
+}
+
+/**
+ * ppc440spe_desc_init_dma2pq - initialize the descriptor for PQ
+ * operation in DMA2 controller
+ */
+static inline void ppc440spe_desc_init_dma2pq(ppc440spe_desc_t *desc,
+		int dst_cnt, int src_cnt, unsigned long flags)
+{
+	xor_cb_t *hw_desc = desc->hw_desc;
+
+	memset (desc->hw_desc, 0, sizeof(xor_cb_t));
+	desc->hw_next = NULL;
+	desc->src_cnt = src_cnt;
+	desc->dst_cnt = dst_cnt;
+	memset (desc->reverse_flags, 0, sizeof (desc->reverse_flags));
+	desc->descs_per_op = 0;
+
+	hw_desc->cbc = XOR_CBCR_TGT_BIT;
+	if (flags & DMA_PREP_INTERRUPT)
+		/* Enable interrupt on complete */
+		hw_desc->cbc |= XOR_CBCR_CBCE_BIT;
+}
+
+/**
+ * ppc440spe_desc_init_dma01pq - initialize the descriptors for PQ operation
+ * qith DMA0/1
+ */
+static inline void ppc440spe_desc_init_dma01pq(ppc440spe_desc_t *desc,
+		int dst_cnt, int src_cnt, unsigned long flags,
+		unsigned long op)
+{
+	dma_cdb_t *hw_desc;
+	ppc440spe_desc_t *iter;
+	u8 dopc;
+
+	/* Common initialization of a PQ descriptors chain */
+	set_bits(op, &desc->flags);
+	desc->src_cnt = src_cnt;
+	desc->dst_cnt = dst_cnt;
+
+	/* WXOR MULTICAST if both P and Q are being computed
+	 * MV_SG1_SG2 if Q only
+	 */
+	dopc = (desc->dst_cnt == DMA_DEST_MAX_NUM) ?
+		DMA_CDB_OPC_MULTICAST : DMA_CDB_OPC_MV_SG1_SG2;
+
+	list_for_each_entry(iter, &desc->group_list, chain_node) {
+		hw_desc = iter->hw_desc;
+		memset (iter->hw_desc, 0, sizeof(dma_cdb_t));
+
+		if (likely(!list_is_last(&iter->chain_node,
+				&desc->group_list))) {
+			/* set 'next' pointer */
+			iter->hw_next = list_entry(iter->chain_node.next,
+				ppc440spe_desc_t, chain_node);
+			clear_bit(PPC440SPE_DESC_INT, &iter->flags);
+		} else {
+			/* this is the last descriptor.
+			 * this slot will be pasted from ADMA level
+			 * each time it wants to configure parameters
+			 * of the transaction (src, dst, ...)
+			 */
+			iter->hw_next = NULL;
+			if (flags & DMA_PREP_INTERRUPT)
+				set_bit(PPC440SPE_DESC_INT, &iter->flags);
+			else
+				clear_bit(PPC440SPE_DESC_INT, &iter->flags);
+		}
+	}
+
+	/* Set OPS depending on WXOR/RXOR type of operation */
+	if (!test_bit(PPC440SPE_DESC_RXOR, &desc->flags)) {
+		/* This is a WXOR only chain:
+		 * - first descriptors are for zeroing destinations
+		 *   if PPC440SPE_ZERO_P/Q set;
+		 * - descriptors remained are for GF-XOR operations.
+		 */
+		iter = list_first_entry(&desc->group_list,
+					ppc440spe_desc_t, chain_node);
+
+		if (test_bit(PPC440SPE_ZERO_P, &desc->flags)) {
+			hw_desc = iter->hw_desc;
+			hw_desc->opc = DMA_CDB_OPC_MV_SG1_SG2;
+			iter = list_first_entry(&iter->chain_node,
+					ppc440spe_desc_t, chain_node);
+		}
+
+		if (test_bit(PPC440SPE_ZERO_Q, &desc->flags)) {
+			hw_desc = iter->hw_desc;
+			hw_desc->opc = DMA_CDB_OPC_MV_SG1_SG2;
+			iter = list_first_entry(&iter->chain_node,
+					ppc440spe_desc_t, chain_node);
+		}
+
+		list_for_each_entry_from(iter, &desc->group_list, chain_node) {
+			hw_desc = iter->hw_desc;
+			hw_desc->opc = dopc;
+		}
+	} else {
+		/* This is either RXOR-only or mixed RXOR/WXOR */
+
+		/* The first 1 or 2 slots in chain are always RXOR,
+		 * if need to calculate P & Q, then there are two
+		 * RXOR slots; if only P or only Q, then there is one
+		 */
+		iter = list_first_entry(&desc->group_list,
+					ppc440spe_desc_t, chain_node);
+		hw_desc = iter->hw_desc;
+		hw_desc->opc = DMA_CDB_OPC_MV_SG1_SG2;
+
+		if (desc->dst_cnt == DMA_DEST_MAX_NUM) {
+			iter = list_first_entry(&iter->chain_node,
+						ppc440spe_desc_t, chain_node);
+			hw_desc = iter->hw_desc;
+			hw_desc->opc = DMA_CDB_OPC_MV_SG1_SG2;
+		}
+
+		/* The remain descs (if any) are WXORs */
+		if (test_bit(PPC440SPE_DESC_WXOR, &desc->flags)) {
+			iter = list_first_entry(&iter->chain_node,
+						ppc440spe_desc_t, chain_node);
+			list_for_each_entry_from(iter, &desc->group_list,
+						chain_node) {
+				hw_desc = iter->hw_desc;
+				hw_desc->opc = dopc;
+			}
+		}
+	}
+}
+
+/**
+ * ppc440spe_desc_init_dma01pqzero_sum - initialize the descriptor for PQ_ZERO_SUM
+ *	operation
+ */
+static inline void ppc440spe_desc_init_dma01pqzero_sum(ppc440spe_desc_t *desc,
+		int dst_cnt, int src_cnt)
+{
+	dma_cdb_t *hw_desc;
+	ppc440spe_desc_t *iter;
+	int i = 0;
+	u8 dopc = (dst_cnt == 2) ? DMA_CDB_OPC_MULTICAST :
+				   DMA_CDB_OPC_MV_SG1_SG2;
+
+	/* initialize each descriptor in chain */
+	list_for_each_entry(iter, &desc->group_list, chain_node) {
+		hw_desc = iter->hw_desc;
+		memset (iter->hw_desc, 0, sizeof(dma_cdb_t));
+
+		/* This is a ZERO_SUM operation:
+		 * - first <src_cnt> descriptors are for GF-XOR operations;
+		 * - <dst_cnt> descriptors remained are for checking the result.
+		 */
+		if (i++ < src_cnt)
+			/* MV_SG1_SG2 if only Q is being verified
+			 * MULTICAST if both P and Q are being verified
+			 */
+			hw_desc->opc = dopc;
+		else
+			/* DMA_CDB_OPC_DCHECK128 operation */
+			hw_desc->opc = DMA_CDB_OPC_DCHECK128;
+
+		if (likely(!list_is_last(&iter->chain_node,
+				&desc->group_list))) {
+			/* set 'next' pointer */
+			iter->hw_next = list_entry(iter->chain_node.next,
+				ppc440spe_desc_t, chain_node);
+		} else {
+			/* this is the last descriptor.
+			 * this slot will be pasted from ADMA level
+			 * each time it wants to configure parameters
+			 * of the transaction (src, dst, ...)
+			 */
+			iter->hw_next = NULL;
+			/* always enable interrupt generating since we get
+			 * the status of pqzero from the handler
+			 */
+			set_bit(PPC440SPE_DESC_INT, &iter->flags);
+		}
+	}
+	desc->src_cnt = src_cnt;
+	desc->dst_cnt = dst_cnt;
+}
+
+/**
+ * ppc440spe_desc_init_memcpy - initialize the descriptor for MEMCPY operation
+ */
+static inline void ppc440spe_desc_init_memcpy(ppc440spe_desc_t *desc,
+		unsigned long flags)
+{
+	dma_cdb_t *hw_desc = desc->hw_desc;
+
+	memset (desc->hw_desc, 0, sizeof(dma_cdb_t));
+	desc->hw_next = NULL;
+	desc->src_cnt = 1;
+	desc->dst_cnt = 1;
+
+	if (flags & DMA_PREP_INTERRUPT)
+		set_bit(PPC440SPE_DESC_INT, &desc->flags);
+	else
+		clear_bit(PPC440SPE_DESC_INT, &desc->flags);
+
+	hw_desc->opc = DMA_CDB_OPC_MV_SG1_SG2;
+}
+
+/**
+ * ppc440spe_desc_init_memset - initialize the descriptor for MEMSET operation
+ */
+static inline void ppc440spe_desc_init_memset(ppc440spe_desc_t *desc, int value,
+		unsigned long flags)
+{
+	dma_cdb_t *hw_desc = desc->hw_desc;
+
+	memset (desc->hw_desc, 0, sizeof(dma_cdb_t));
+	desc->hw_next = NULL;
+	desc->src_cnt = 1;
+	desc->dst_cnt = 1;
+
+	if (flags & DMA_PREP_INTERRUPT)
+		set_bit(PPC440SPE_DESC_INT, &desc->flags);
+	else
+		clear_bit(PPC440SPE_DESC_INT, &desc->flags);
+
+	hw_desc->sg1u = hw_desc->sg1l = cpu_to_le32((u32)value);
+	hw_desc->sg3u = hw_desc->sg3l = cpu_to_le32((u32)value);
+	hw_desc->opc = DMA_CDB_OPC_DFILL128;
+}
+
+/**
+ * ppc440spe_desc_set_src_addr - set source address into the descriptor
+ */
+static inline void ppc440spe_desc_set_src_addr( ppc440spe_desc_t *desc,
+					ppc440spe_ch_t *chan, int src_idx,
+					dma_addr_t addrh, dma_addr_t addrl)
+{
+	dma_cdb_t *dma_hw_desc;
+	xor_cb_t *xor_hw_desc;
+	phys_addr_t addr64, tmplow, tmphi;
+
+	switch (chan->device->id) {
+	case PPC440SPE_DMA0_ID:
+	case PPC440SPE_DMA1_ID:
+		if (!addrh) {
+			addr64 = addrl;
+			tmphi = (addr64 >> 32);
+			tmplow = (addr64 & 0xFFFFFFFF);
+		} else {
+			tmphi = addrh;
+			tmplow = addrl;
+		}
+		dma_hw_desc = desc->hw_desc;
+		dma_hw_desc->sg1l = cpu_to_le32((u32)tmplow);
+		dma_hw_desc->sg1u |= cpu_to_le32((u32)tmphi);
+		break;
+	case PPC440SPE_XOR_ID:
+		xor_hw_desc = desc->hw_desc;
+		xor_hw_desc->ops[src_idx].l = addrl;
+		// FIXME. Dirty hack.
+		xor_hw_desc->ops[src_idx].h |= addrh;
+		break;
+	}
+}
+
+/**
+ * ppc440spe_desc_set_src_mult - set source address mult into the descriptor
+ */
+static inline void ppc440spe_desc_set_src_mult( ppc440spe_desc_t *desc,
+			ppc440spe_ch_t *chan, u32 mult_index, int sg_index,
+			unsigned char mult_value)
+{
+	dma_cdb_t *dma_hw_desc;
+	xor_cb_t *xor_hw_desc;
+	u32 *psgu;
+
+	switch (chan->device->id) {
+	case PPC440SPE_DMA0_ID:
+	case PPC440SPE_DMA1_ID:
+		dma_hw_desc = desc->hw_desc;
+
+		switch(sg_index){
+		/* for RXOR operations set multiplier
+		 * into source cued address
+		 */
+		case DMA_CDB_SG_SRC:
+			psgu = &dma_hw_desc->sg1u;
+			break;
+		/* for WXOR operations set multiplier
+		 * into destination cued address(es)
+		 */
+		case DMA_CDB_SG_DST1:
+			psgu = &dma_hw_desc->sg2u;
+			break;
+		case DMA_CDB_SG_DST2:
+			psgu = &dma_hw_desc->sg3u;
+			break;
+		default:
+			BUG();
+		}
+
+		*psgu |= cpu_to_le32(mult_value << mult_index);
+		break;
+	case PPC440SPE_XOR_ID:
+		xor_hw_desc = desc->hw_desc;
+		break;
+	default:
+		BUG();
+	}
+}
+
+/**
+ * ppc440spe_desc_set_dest_addr - set destination address into the descriptor
+ */
+static inline void ppc440spe_desc_set_dest_addr(ppc440spe_desc_t *desc,
+				ppc440spe_ch_t *chan,
+				dma_addr_t addrh, dma_addr_t addrl,
+				u32 dst_idx)
+{
+	dma_cdb_t *dma_hw_desc;
+	xor_cb_t *xor_hw_desc;
+	phys_addr_t addr64, tmphi, tmplow;
+	u32 *psgu, *psgl;
+
+	switch (chan->device->id) {
+	case PPC440SPE_DMA0_ID:
+	case PPC440SPE_DMA1_ID:
+		if (!addrh) {
+			addr64 = addrl;
+			tmphi = (addr64 >> 32);
+			tmplow = (addr64 & 0xFFFFFFFF);
+		} else {
+			tmphi = addrh;
+			tmplow = addrl;
+		}
+		dma_hw_desc = desc->hw_desc;
+
+		psgu = dst_idx ? &dma_hw_desc->sg3u : &dma_hw_desc->sg2u;
+		psgl = dst_idx ? &dma_hw_desc->sg3l : &dma_hw_desc->sg2l;
+
+		*psgl = cpu_to_le32((u32)tmplow);
+		*psgu |= cpu_to_le32((u32)tmphi);
+		break;
+	case PPC440SPE_XOR_ID:
+		xor_hw_desc = desc->hw_desc;
+		xor_hw_desc->cbtal = addrl;
+		xor_hw_desc->cbtah |= addrh;
+		break;
+	}
+}
+
+/**
+ * ppc440spe_desc_set_byte_count - set number of data bytes involved
+ * into the operation
+ */
+static inline void ppc440spe_desc_set_byte_count(ppc440spe_desc_t *desc,
+					ppc440spe_ch_t *chan, u32 byte_count)
+{
+	dma_cdb_t *dma_hw_desc;
+	xor_cb_t *xor_hw_desc;
+
+	switch (chan->device->id) {
+	case PPC440SPE_DMA0_ID:
+	case PPC440SPE_DMA1_ID:
+		dma_hw_desc = desc->hw_desc;
+		dma_hw_desc->cnt = cpu_to_le32(byte_count);
+		break;
+	case PPC440SPE_XOR_ID:
+		xor_hw_desc = desc->hw_desc;
+		xor_hw_desc->cbbc = byte_count;
+		break;
+	}
+}
+
+/**
+ * ppc440spe_desc_set_rxor_block_size - set RXOR block size
+ */
+static inline void ppc440spe_desc_set_rxor_block_size(u32 byte_count)
+{
+	/* assume that byte_count is aligned on the 512-boundary;
+	 * thus write it directly to the register (bits 23:31 are
+	 * reserved there).
+	 */
+	mtdcr(DCRN_MQ0_CF2H, byte_count);
+}
+
+/**
+ * ppc440spe_desc_set_dcheck - set CHECK pattern
+ */
+static inline void ppc440spe_desc_set_dcheck(ppc440spe_desc_t *desc,
+						ppc440spe_ch_t *chan, u8 *qword)
+{
+	dma_cdb_t *dma_hw_desc;
+
+	switch (chan->device->id) {
+	case PPC440SPE_DMA0_ID:
+	case PPC440SPE_DMA1_ID:
+		dma_hw_desc = desc->hw_desc;
+		out_le32(&dma_hw_desc->sg3l, qword[0]);
+		out_le32(&dma_hw_desc->sg3u, qword[4]);
+		out_le32(&dma_hw_desc->sg2l, qword[8]);
+		out_le32(&dma_hw_desc->sg2u, qword[12]);
+		break;
+	default:
+		BUG();
+	}
+}
+
+/**
+ * ppc440spe_xor_set_link - set link address in xor CB
+ */
+static inline void ppc440spe_xor_set_link (ppc440spe_desc_t *prev_desc,
+						ppc440spe_desc_t *next_desc)
+{
+	xor_cb_t *xor_hw_desc = prev_desc->hw_desc;
+
+	if (unlikely(!next_desc || !(next_desc->phys))) {
+		printk(KERN_ERR "%s: next_desc=0x%p; next_desc->phys=0x%x\n",
+			__FUNCTION__, next_desc,
+			next_desc ? next_desc->phys : 0);
+		BUG();
+	}
+
+	xor_hw_desc->cbs = 0;
+	xor_hw_desc->cblal = next_desc->phys;
+	xor_hw_desc->cblah = 0;
+	xor_hw_desc->cbc |= XOR_CBCR_LNK_BIT;
+}
+
+/**
+ * ppc440spe_desc_set_link - set the address of descriptor following this
+ * descriptor in chain
+ */
+static inline void ppc440spe_desc_set_link(ppc440spe_ch_t *chan,
+		ppc440spe_desc_t *prev_desc, ppc440spe_desc_t *next_desc)
+{
+	unsigned long flags;
+	ppc440spe_desc_t *tail = next_desc;
+
+	if (unlikely(!prev_desc || !next_desc ||
+		(prev_desc->hw_next && prev_desc->hw_next != next_desc))) {
+		/* If previous next is overwritten something is wrong.
+		 * though we may refetch from append to initiate list
+		 * processing; in this case - it's ok.
+		 */
+		printk(KERN_ERR "%s: prev_desc=0x%p; next_desc=0x%p; "
+			"prev->hw_next=0x%p\n", __FUNCTION__, prev_desc,
+			next_desc, prev_desc ? prev_desc->hw_next : 0);
+		BUG();
+	}
+
+	local_irq_save(flags);
+
+	/* do s/w chaining both for DMA and XOR descriptors */
+	prev_desc->hw_next = next_desc;
+
+	switch (chan->device->id) {
+	case PPC440SPE_DMA0_ID:
+	case PPC440SPE_DMA1_ID:
+		break;
+	case PPC440SPE_XOR_ID:
+		/* bind descriptor to the chain */
+		while (tail->hw_next)
+			tail = tail->hw_next;
+		xor_last_linked = tail;
+
+		if (prev_desc == xor_last_submit)
+			/* do not link to the last submitted CB */
+			break;
+		ppc440spe_xor_set_link (prev_desc, next_desc);
+		break;
+	}
+
+	local_irq_restore(flags);
+}
+
+/**
+ * ppc440spe_desc_get_src_addr - extract the source address from the descriptor
+ */
+static inline u32 ppc440spe_desc_get_src_addr(ppc440spe_desc_t *desc,
+					ppc440spe_ch_t *chan, int src_idx)
+{
+	dma_cdb_t *dma_hw_desc;
+	xor_cb_t *xor_hw_desc;
+
+	switch (chan->device->id) {
+	case PPC440SPE_DMA0_ID:
+	case PPC440SPE_DMA1_ID:
+		dma_hw_desc = desc->hw_desc;
+		/* May have 0, 1, 2, or 3 sources */
+		switch (dma_hw_desc->opc) {
+		case DMA_CDB_OPC_NO_OP:
+		case DMA_CDB_OPC_DFILL128:
+			return 0;
+		case DMA_CDB_OPC_DCHECK128:
+			if (unlikely(src_idx)) {
+				printk(KERN_ERR "%s: try to get %d source for"
+				    " DCHECK128\n", __FUNCTION__, src_idx);
+				BUG();
+			}
+			return le32_to_cpu(dma_hw_desc->sg1l);
+		case DMA_CDB_OPC_MULTICAST:
+		case DMA_CDB_OPC_MV_SG1_SG2:
+			if (unlikely(src_idx > 2)) {
+				printk(KERN_ERR "%s: try to get %d source from"
+				    " DMA descr\n", __FUNCTION__, src_idx);
+				BUG();
+			}
+			if (src_idx) {
+				if (le32_to_cpu(dma_hw_desc->sg1u) &
+				    DMA_CUED_XOR_WIN_MSK) {
+					u8 region;
+
+					if (src_idx == 1)
+						return le32_to_cpu(
+						    dma_hw_desc->sg1l) +
+							desc->unmap_len;
+
+					region = (le32_to_cpu(
+					    dma_hw_desc->sg1u)) >>
+						DMA_CUED_REGION_OFF;
+
+					region &= DMA_CUED_REGION_MSK;
+					switch (region) {
+					case DMA_RXOR123:
+						return le32_to_cpu(
+						    dma_hw_desc->sg1l) +
+							(desc->unmap_len << 1);
+					case DMA_RXOR124:
+						return le32_to_cpu(
+						    dma_hw_desc->sg1l) +
+							(desc->unmap_len * 3);
+					case DMA_RXOR125:
+						return le32_to_cpu(
+						    dma_hw_desc->sg1l) +
+							(desc->unmap_len << 2);
+					default:
+						printk (KERN_ERR
+						    "%s: try to"
+						    " get src3 for region %02x"
+						    "PPC440SPE_DESC_RXOR12?\n",
+						    __FUNCTION__, region);
+						BUG();
+					}
+				} else {
+					printk(KERN_ERR
+						"%s: try to get %d"
+						" source for non-cued descr\n",
+						__FUNCTION__, src_idx);
+					BUG();
+				}
+			}
+			return le32_to_cpu(dma_hw_desc->sg1l);
+		default:
+			printk(KERN_ERR "%s: unknown OPC 0x%02x\n",
+				__FUNCTION__, dma_hw_desc->opc);
+			BUG();
+		}
+		return le32_to_cpu(dma_hw_desc->sg1l);
+	case PPC440SPE_XOR_ID:
+		/* May have up to 16 sources */
+		xor_hw_desc = desc->hw_desc;
+		return xor_hw_desc->ops[src_idx].l;
+	}
+	return 0;
+}
+
+/**
+ * ppc440spe_desc_get_dest_addr - extract the destination address from the
+ * descriptor
+ */
+static inline u32 ppc440spe_desc_get_dest_addr(ppc440spe_desc_t *desc,
+		ppc440spe_ch_t *chan, int idx)
+{
+	dma_cdb_t *dma_hw_desc;
+	xor_cb_t *xor_hw_desc;
+
+	switch (chan->device->id) {
+	case PPC440SPE_DMA0_ID:
+	case PPC440SPE_DMA1_ID:
+		dma_hw_desc = desc->hw_desc;
+
+		if (likely(!idx))
+			return le32_to_cpu(dma_hw_desc->sg2l);
+		return le32_to_cpu(dma_hw_desc->sg3l);
+	case PPC440SPE_XOR_ID:
+		xor_hw_desc = desc->hw_desc;
+		return xor_hw_desc->cbtal;
+	}
+	return 0;
+}
+
+/**
+ * ppc440spe_desc_get_byte_count - extract the byte count from the descriptor
+ */
+static inline u32 ppc440spe_desc_get_byte_count(ppc440spe_desc_t *desc,
+		ppc440spe_ch_t *chan)
+{
+	dma_cdb_t *dma_hw_desc;
+	xor_cb_t *xor_hw_desc;
+
+	switch (chan->device->id) {
+	case PPC440SPE_DMA0_ID:
+	case PPC440SPE_DMA1_ID:
+		dma_hw_desc = desc->hw_desc;
+		return le32_to_cpu(dma_hw_desc->cnt);
+	case PPC440SPE_XOR_ID:
+		xor_hw_desc = desc->hw_desc;
+		return xor_hw_desc->cbbc;
+	default:
+		BUG();
+	}
+	return 0;
+}
+
+/**
+ * ppc440spe_desc_get_src_num - extract the number of source addresses from
+ * the descriptor
+ */
+static inline u32 ppc440spe_desc_get_src_num(ppc440spe_desc_t *desc,
+		ppc440spe_ch_t *chan)
+{
+	dma_cdb_t *dma_hw_desc;
+	xor_cb_t *xor_hw_desc;
+
+	switch (chan->device->id) {
+	case PPC440SPE_DMA0_ID:
+	case PPC440SPE_DMA1_ID:
+		dma_hw_desc = desc->hw_desc;
+
+		switch (dma_hw_desc->opc) {
+		case DMA_CDB_OPC_NO_OP:
+		case DMA_CDB_OPC_DFILL128:
+			return 0;
+		case DMA_CDB_OPC_DCHECK128:
+			return 1;
+		case DMA_CDB_OPC_MV_SG1_SG2:
+		case DMA_CDB_OPC_MULTICAST:
+			/*
+			 * Only for RXOR operations we have more than
+			 * one source
+			 */
+			if (le32_to_cpu(dma_hw_desc->sg1u) &
+			    DMA_CUED_XOR_WIN_MSK) {
+				/* RXOR op, there are 2 or 3 sources */
+				if (((le32_to_cpu(dma_hw_desc->sg1u) >>
+				    DMA_CUED_REGION_OFF) &
+				      DMA_CUED_REGION_MSK) == DMA_RXOR12) {
+					/* RXOR 1-2 */
+					return 2;
+				} else {
+					/* RXOR 1-2-3/1-2-4/1-2-5 */
+					return 3;
+				}
+			}
+			return 1;
+		default:
+			printk(KERN_ERR "%s: unknown OPC 0x%02x\n",
+				__FUNCTION__, dma_hw_desc->opc);
+			BUG();
+		}
+	case PPC440SPE_XOR_ID:
+		/* up to 16 sources */
+		xor_hw_desc = desc->hw_desc;
+		return (xor_hw_desc->cbc & XOR_CDCR_OAC_MSK);
+	default:
+		BUG();
+	}
+	return 0;
+}
+
+/**
+ * ppc440spe_desc_get_dst_num - get the number of destination addresses in
+ * this descriptor
+ */
+static inline u32 ppc440spe_desc_get_dst_num(ppc440spe_desc_t *desc,
+		ppc440spe_ch_t *chan)
+{
+	dma_cdb_t *dma_hw_desc;
+
+	switch (chan->device->id) {
+	case PPC440SPE_DMA0_ID:
+	case PPC440SPE_DMA1_ID:
+		/* May be 1 or 2 destinations */
+		dma_hw_desc = desc->hw_desc;
+		switch (dma_hw_desc->opc) {
+		case DMA_CDB_OPC_NO_OP:
+		case DMA_CDB_OPC_DCHECK128:
+			return 0;
+		case DMA_CDB_OPC_MV_SG1_SG2:
+		case DMA_CDB_OPC_DFILL128:
+			return 1;
+		case DMA_CDB_OPC_MULTICAST:
+			return 2;
+		default:
+			printk(KERN_ERR "%s: unknown OPC 0x%02x\n",
+				__FUNCTION__, dma_hw_desc->opc);
+			BUG();
+		}
+	case PPC440SPE_XOR_ID:
+		/* Always only 1 destination */
+		return 1;
+	default:
+		BUG();
+	}
+	return 0;
+}
+
+/**
+ * ppc440spe_desc_get_link - get the address of the descriptor that
+ * follows this one
+ */
+static inline u32 ppc440spe_desc_get_link(ppc440spe_desc_t *desc,
+		ppc440spe_ch_t *chan)
+{
+	if (!desc->hw_next)
+		return 0;
+
+	return desc->hw_next->phys;
+}
+
+/**
+ * ppc440spe_desc_is_aligned - check alignment
+ */
+static inline int ppc440spe_desc_is_aligned(ppc440spe_desc_t *desc,
+		int num_slots)
+{
+	return (desc->idx & (num_slots - 1)) ? 0 : 1;
+}
+
+/**
+ * ppc440spe_chan_xor_slot_count - get the number of slots necessary for
+ * XOR operation
+ */
+static inline int ppc440spe_chan_xor_slot_count(size_t len, int src_cnt,
+		int *slots_per_op)
+{
+	int slot_cnt;
+
+	/* each XOR descriptor provides up to 16 source operands */
+	slot_cnt = *slots_per_op = (src_cnt + XOR_MAX_OPS - 1)/XOR_MAX_OPS;
+
+	if (likely(len <= PPC440SPE_ADMA_XOR_MAX_BYTE_COUNT))
+		return slot_cnt;
+
+	printk(KERN_ERR "%s: len %d > max %d !!\n",
+		__FUNCTION__, len, PPC440SPE_ADMA_XOR_MAX_BYTE_COUNT);
+	BUG();
+	return slot_cnt;
+}
+
+/**
+ */
+static inline int ppc440spe_dma2_pq_slot_count (dma_addr_t *srcs,
+		int src_cnt, size_t len)
+{
+	int order = 0;
+	int state = 0;
+	int addr_count = 0;
+	int i;
+	for (i=1; i<src_cnt; i++) {
+		char *cur_addr = (char *)srcs[i];
+		char *old_addr = (char *)srcs[i-1];
+		switch (state) {
+			case 0:
+				if (cur_addr == old_addr + len) {
+					/* direct RXOR */
+					order = 1;
+					state = 1;
+					if (i == src_cnt-1) {
+						addr_count++;
+					}
+				} else if (old_addr == cur_addr + len) {
+					/* reverse RXOR */
+					order = -1;
+					state = 1;
+					if (i == src_cnt-1) {
+						addr_count++;
+					}
+				} else {
+					state = 3;
+				}
+				break;
+			case 1:
+				if (i == src_cnt-2 || (order == -1
+					&& cur_addr != old_addr - len)) {
+					order = 0;
+					state = 0;
+					addr_count++;
+				} else if (cur_addr == old_addr + len*order) {
+					state = 2;
+					if (i == src_cnt-1) {
+						addr_count++;
+					}
+				} else if (cur_addr == old_addr + 2*len) {
+					state = 2;
+					if (i == src_cnt-1) {
+						addr_count++;
+					}
+				} else if (cur_addr == old_addr + 3*len) {
+					state = 2;
+					if (i == src_cnt-1) {
+						addr_count++;
+					}
+				} else {
+					order = 0;
+					state = 0;
+					addr_count++;
+				}
+				break;
+			case 2:
+				order = 0;
+				state = 0;
+				addr_count++;
+				break;
+		}
+		if (state == 3) break;
+	}
+	if (src_cnt <= 1 || (state != 1 && state != 2)) {
+		/* FIXME. return 0 here and check for this when called. */
+		BUG ();
+	}
+
+	return (addr_count + XOR_MAX_OPS - 1) / XOR_MAX_OPS;
+}
+
+
+/******************************************************************************
+ * ADMA channel low-level routines
+ ******************************************************************************/
+
+static inline u32 ppc440spe_chan_get_current_descriptor(ppc440spe_ch_t *chan);
+static inline void ppc440spe_chan_append(ppc440spe_ch_t *chan);
+
+/**
+ * ppc440spe_adma_device_clear_eot_status - interrupt ack to XOR or DMA engine
+ */
+static inline void ppc440spe_adma_device_clear_eot_status (ppc440spe_ch_t *chan)
+{
+	volatile dma_regs_t *dma_reg;
+	volatile xor_regs_t *xor_reg;
+	u8 *p = chan->device->dma_desc_pool_virt;
+	dma_cdb_t *cdb;
+	u32 rv, i;
+
+	switch (chan->device->id) {
+	case PPC440SPE_DMA0_ID:
+	case PPC440SPE_DMA1_ID:
+		/* read FIFO to ack */
+		dma_reg = dma_regs[chan->device->id];
+		while ((rv = in_le32(&dma_reg->csfpl))) {
+			i = rv & DMA_CDB_ADDR_MSK;
+			cdb = (dma_cdb_t *)&p[i -
+			    (u32)chan->device->dma_desc_pool];
+
+			/* Clear opcode to ack. This is necessary for
+			 * ZeroSum operations only
+			 */
+			cdb->opc = 0;
+
+			if (test_bit(PPC440SPE_RXOR_RUN,
+			    &ppc440spe_rxor_state)) {
+				/* probably this is a completed RXOR op,
+				 * get pointer to CDB using the fact that
+				 * physical and virtual addresses of CDB
+				 * in pools have the same offsets
+				 */
+				if (le32_to_cpu(cdb->sg1u) &
+				    DMA_CUED_XOR_BASE) {
+				/* this is a RXOR */
+					clear_bit(PPC440SPE_RXOR_RUN,
+					    &ppc440spe_rxor_state);
+				}
+			}
+
+			if (rv & DMA_CDB_STATUS_MSK) {
+				/* ZeroSum check failed
+				 */
+				ppc440spe_desc_t *iter;
+				dma_addr_t phys = rv & ~DMA_CDB_MSK;
+
+				/*
+				 * Update the status of corresponding
+				 * descriptor.
+				 */
+				list_for_each_entry(iter, &chan->chain,
+				    chain_node) {
+					if (iter->phys == phys)
+						break;
+				}
+				/*
+				 * if cannot find the corresponding
+				 * slot it's a bug
+				 */
+				BUG_ON (&iter->chain_node == &chan->chain);
+
+				if (iter->xor_check_result)
+					*iter->xor_check_result |=
+					    rv & DMA_CDB_STATUS_MSK;
+			}
+		}
+
+		rv = in_le32(&dma_reg->dsts);
+		if (rv) {
+			printk("DMA%d err status: 0x%x\n", chan->device->id,
+				rv);
+			/* write back to clear */
+			out_le32(&dma_reg->dsts, rv);
+		}
+		break;
+	case PPC440SPE_XOR_ID:
+		/* reset status bits to ack*/
+		xor_reg = dma_regs[chan->device->id];
+
+		rv = xor_reg->sr;
+		xor_reg->sr = rv;
+
+		if (rv & (XOR_IE_ICBIE_BIT|XOR_IE_ICIE_BIT|XOR_IE_RPTIE_BIT)) {
+			if (rv & XOR_IE_RPTIE_BIT) {
+				/* Read PLB Timeout Error.
+				 * Try to resubmit the CB
+				 */
+				xor_reg->cblalr = xor_reg->ccbalr;
+				xor_reg->crsr |= XOR_CRSR_XAE_BIT;
+			} else
+				printk (KERN_ERR "XOR ERR 0x%x status\n", rv);
+			break;
+		}
+
+		/*  if the XORcore is idle, but there are unprocessed CBs
+		 * then refetch the s/w chain here
+		 */
+		if (!(xor_reg->sr & XOR_SR_XCP_BIT) && do_xor_refetch) {
+			ppc440spe_chan_append(chan);
+		}
+		break;
+	}
+}
+
+/**
+ * ppc440spe_chan_is_busy - get the channel status
+ */
+static inline int ppc440spe_chan_is_busy(ppc440spe_ch_t *chan)
+{
+	int busy = 0;
+	volatile xor_regs_t *xor_reg;
+	volatile dma_regs_t *dma_reg;
+
+	switch (chan->device->id) {
+	case PPC440SPE_DMA0_ID:
+	case PPC440SPE_DMA1_ID:
+		dma_reg = dma_regs[chan->device->id];
+		/*  if command FIFO's head and tail pointers are equal and
+		 * status tail is the same as command, then channel is free
+		 */
+		if (dma_reg->cpfhp != dma_reg->cpftp ||
+		    dma_reg->cpftp != dma_reg->csftp)
+			busy = 1;
+		break;
+	case PPC440SPE_XOR_ID:
+		/* use the special status bit for the XORcore
+		 */
+		xor_reg = dma_regs[chan->device->id];
+		busy = (xor_reg->sr & XOR_SR_XCP_BIT) ? 1 : 0;
+		break;
+	}
+
+	return busy;
+}
+
+/**
+ * ppc440spe_chan_set_first_xor_descriptor -  initi XORcore chain
+ */
+static inline void ppc440spe_chan_set_first_xor_descriptor(ppc440spe_ch_t *chan,
+						ppc440spe_desc_t *next_desc)
+{
+	volatile xor_regs_t *xor_reg;
+
+	xor_reg = dma_regs[chan->device->id];
+
+	if (xor_reg->sr & XOR_SR_XCP_BIT)
+		printk(KERN_INFO "%s: Warn: XORcore is running "
+			"when try to set the first CDB!\n",
+			__FUNCTION__);
+
+	xor_last_submit = xor_last_linked = next_desc;
+
+	xor_reg->crsr = XOR_CRSR_64BA_BIT;
+
+	xor_reg->cblalr = next_desc->phys;
+	xor_reg->cblahr = 0;
+	xor_reg->cbcr |= XOR_CBCR_LNK_BIT;
+
+	chan->hw_chain_inited = 1;
+}
+
+/**
+ * ppc440spe_dma_put_desc - put DMA0,1 descriptor to FIFO.
+ * called with irqs disabled
+ */
+static inline void ppc440spe_dma_put_desc(ppc440spe_ch_t *chan,
+		ppc440spe_desc_t *desc)
+{
+	u32 pcdb;
+	volatile dma_regs_t *dma_reg = dma_regs[chan->device->id];
+
+	pcdb = desc->phys;
+	if (!test_bit(PPC440SPE_DESC_INT, &desc->flags))
+		pcdb |= DMA_CDB_NO_INT;
+
+	chan_last_sub[chan->device->id] = desc;
+#ifdef ADMA_LL_DEBUG
+	print_cb(chan, desc->hw_desc);
+#endif
+	out_le32 (&dma_reg->cpfpl, pcdb);
+}
+
+/**
+ * ppc440spe_chan_append - update the h/w chain in the channel
+ */
+static inline void ppc440spe_chan_append(ppc440spe_ch_t *chan)
+{
+	volatile dma_regs_t *dma_reg;
+	volatile xor_regs_t *xor_reg;
+	ppc440spe_desc_t *iter;
+	xor_cb_t *xcb;
+	u32 cur_desc;
+	unsigned long flags;
+
+	local_irq_save(flags);
+
+	switch (chan->device->id) {
+	case PPC440SPE_DMA0_ID:
+	case PPC440SPE_DMA1_ID:
+		dma_reg = dma_regs[chan->device->id];
+		cur_desc = ppc440spe_chan_get_current_descriptor(chan);
+
+		if (likely(cur_desc)) {
+			iter = chan_last_sub[chan->device->id];
+			BUG_ON(!iter);
+		} else {
+			/* first peer */
+			iter = chan_first_cdb[chan->device->id];
+			BUG_ON(!iter);
+			ppc440spe_dma_put_desc(chan, iter);
+			chan->hw_chain_inited = 1;
+		}
+
+		/* is there something new to append */
+		if (!iter->hw_next)
+			break;
+
+		/* flush descriptors from the s/w queue to fifo */
+		list_for_each_entry_continue(iter, &chan->chain, chain_node) {
+			ppc440spe_dma_put_desc(chan, iter);
+			if (!iter->hw_next)
+				break;
+		}
+		break;
+	case PPC440SPE_XOR_ID:
+		/* update h/w links and refetch */
+		if (!xor_last_submit->hw_next)
+			break;
+
+		xor_reg = dma_regs[chan->device->id];
+		/* the last linked CDB has to generate an interrupt
+		 * that we'd be able to append the next lists to h/w
+		 * regardless of the XOR engine state at the moment of
+		 * appending of these next lists
+		 */
+		xcb = xor_last_linked->hw_desc;
+		xcb->cbc |= XOR_CBCR_CBCE_BIT;
+
+		if (!(xor_reg->sr & XOR_SR_XCP_BIT)) {
+			/* XORcore is idle. Refetch now */
+			do_xor_refetch = 0;
+			ppc440spe_xor_set_link(xor_last_submit,
+				xor_last_submit->hw_next);
+
+#ifdef ADMA_LL_DEBUG
+			for (iter = xor_last_submit->hw_next; iter;
+			     iter = iter->hw_next)
+				print_cb(chan, iter->hw_desc);
+#endif
+			xor_last_submit = xor_last_linked;
+			xor_reg->crsr |= XOR_CRSR_RCBE_BIT | XOR_CRSR_64BA_BIT;
+		} else {
+			/* XORcore is running. Refetch later in the handler */
+			do_xor_refetch = 1;
+		}
+
+		break;
+	}
+
+	local_irq_restore(flags);
+}
+
+/**
+ * ppc440spe_chan_get_current_descriptor - get the currently executed descriptor
+ */
+static inline u32 ppc440spe_chan_get_current_descriptor(ppc440spe_ch_t *chan)
+{
+	volatile dma_regs_t *dma_reg;
+	volatile xor_regs_t *xor_reg;
+
+	if (unlikely(!chan->hw_chain_inited))
+		/* h/w descriptor chain is not initialized yet */
+		return 0;
+
+	switch (chan->device->id) {
+	case PPC440SPE_DMA0_ID:
+	case PPC440SPE_DMA1_ID:
+		dma_reg = dma_regs[chan->device->id];
+		return (le32_to_cpu(dma_reg->acpl)) & (~DMA_CDB_MSK);
+	case PPC440SPE_XOR_ID:
+		xor_reg = dma_regs[chan->device->id];
+		return xor_reg->ccbalr;
+	}
+	return 0;
+}
+
+/**
+ * ppc440spe_chan_run - enable the channel
+ */
+static inline void ppc440spe_chan_run(ppc440spe_ch_t *chan)
+{
+	volatile xor_regs_t *xor_reg;
+
+	switch (chan->device->id) {
+	case PPC440SPE_DMA0_ID:
+	case PPC440SPE_DMA1_ID:
+		/* DMAs are always enabled, do nothing */
+		break;
+	case PPC440SPE_XOR_ID:
+		/* drain write buffer */
+		xor_reg = dma_regs[chan->device->id];
+
+		/* fetch descriptor pointed to in <link> */
+		xor_reg->crsr = XOR_CRSR_64BA_BIT | XOR_CRSR_XAE_BIT;
+		break;
+	}
+}
+
+
+/******************************************************************************
+ * ADMA device level
+ ******************************************************************************/
+
+static void ppc440spe_chan_start_null_xor(ppc440spe_ch_t *chan);
+static int ppc440spe_adma_alloc_chan_resources(struct dma_chan *chan,
+					       struct dma_client *client);
+static dma_cookie_t ppc440spe_adma_tx_submit(
+		struct dma_async_tx_descriptor *tx);
+
+static void ppc440spe_adma_set_dest(ppc440spe_desc_t *tx, dma_addr_t addr,
+	int index);
+
+static void ppc440spe_adma_memcpy_xor_set_src(ppc440spe_desc_t *tx,
+	dma_addr_t addr, int index);
+
+static void ppc440spe_adma_pq_set_dest(ppc440spe_desc_t *tx, dma_addr_t *paddr);
+static void ppc440spe_adma_pq_set_src(ppc440spe_desc_t *tx, dma_addr_t addr,
+	int index);
+static void ppc440spe_adma_pq_set_src_mult(ppc440spe_desc_t *tx,
+	unsigned char mult, int index, int dst_pos);
+
+static void ppc440spe_adma_pqzero_sum_set_dest(ppc440spe_desc_t *tx,
+	dma_addr_t paddr, dma_addr_t qaddr);
+static void ppc440spe_adma_pqzero_sum_set_src(ppc440spe_desc_t *tx,
+	dma_addr_t addr, int index);
+static void ppc440spe_adma_pqzero_sum_set_src_mult(ppc440spe_desc_t *tx,
+	unsigned char mult, int index, int dst_pos);
+
+/**
+ * ppc440spe_can_rxor - check if the operands may be processed with RXOR
+ */
+static int ppc440spe_can_rxor (struct page **srcs, int src_cnt, size_t len)
+{
+	int i, order = 0, state = 0;
+
+	if (unlikely(!(src_cnt > 1)))
+		return 0;
+
+	for (i=1; i<src_cnt; i++) {
+		char *cur_addr = page_address (srcs[i]);
+		char *old_addr = page_address (srcs[i-1]);
+		switch (state) {
+		case 0:
+			if (cur_addr == old_addr + len) {
+				/* direct RXOR */
+				order = 1;
+				state = 1;
+			} else
+			if (old_addr == cur_addr + len) {
+				/* reverse RXOR */
+				order = -1;
+				state = 1;
+			} else
+				goto out;
+			break;
+		case 1:
+			if ((i == src_cnt-2) ||
+			    (order == -1 && cur_addr != old_addr - len)) {
+				order = 0;
+				state = 0;
+			} else
+			if ((cur_addr == old_addr + len*order) ||
+			    (cur_addr == old_addr + 2*len) ||
+			    (cur_addr == old_addr + 3*len)) {
+				state = 2;
+			} else {
+				order = 0;
+				state = 0;
+			}
+			break;
+		case 2:
+			order = 0;
+			state = 0;
+			break;
+		}
+	}
+
+out:
+	if (state == 1 || state == 2)
+		return 1;
+
+	return 0;
+}
+
+/**
+ * ppc440spe_adma_device_estimate - estimate the efficiency of processing
+ *	the operation given on this channel. It's assumed that 'chan' is
+ *	capable to process 'cap' type of operation.
+ * @chan: channel to use
+ * @cap: type of transaction
+ * @src_lst: array of source pointers
+ * @src_cnt: number of source operands
+ * @src_sz: size of each source operand
+ */
+int ppc440spe_adma_estimate (struct dma_chan *chan,
+	enum dma_transaction_type cap, struct page **src_lst,
+	int src_cnt, size_t src_sz)
+{
+	int ef = 1;
+
+	if (cap == DMA_PQ || cap == DMA_PQ_ZERO_SUM) {
+		/* If RAID-6 capabilities were not activated don't try
+		 * to use them
+		 */
+		if (unlikely(!ppc440spe_r6_enabled))
+			return -1;
+	}
+	/*  in the current implementation of ppc440spe ADMA driver it
+	 * makes sense to pick out only pq case, because it may be
+	 * processed:
+	 * (1) either using Biskup method on DMA2;
+	 * (2) or on DMA0/1.
+	 *  Thus we give a favour to (1) if the sources are suitable;
+	 * else let it be processed on one of the DMA0/1 engines.
+	 */
+	if (cap == DMA_PQ && chan->chan_id == PPC440SPE_XOR_ID) {
+		if (ppc440spe_can_rxor(src_lst, src_cnt, src_sz))
+			ef = 3; /* override (dma0/1 + idle) */
+		else
+			ef = 0; /* can't process on DMA2 if !rxor */
+	}
+
+	/* channel idleness increases the priority */
+	if (likely(ef) &&
+	    !ppc440spe_chan_is_busy(to_ppc440spe_adma_chan(chan)))
+		ef++;
+
+	return ef;
+}
+
+/**
+ * ppc440spe_get_group_entry - get group entry with index idx
+ * @tdesc: is the last allocated slot in the group.
+ */
+static inline ppc440spe_desc_t *
+ppc440spe_get_group_entry ( ppc440spe_desc_t *tdesc, u32 entry_idx)
+{
+	ppc440spe_desc_t *iter = tdesc->group_head;
+	int i = 0;
+
+	if(entry_idx < 0 || entry_idx >= (tdesc->src_cnt + tdesc->dst_cnt)) {
+		printk("%s: entry_idx %d, src_cnt %d, dst_cnt %d\n",
+			__func__, entry_idx, tdesc->src_cnt, tdesc->dst_cnt);
+		BUG();
+	}
+
+	list_for_each_entry(iter, &tdesc->group_list, chain_node) {
+		if (i++ == entry_idx)
+			break;
+	}
+	return iter;
+}
+
+/**
+ * ppc440spe_adma_free_slots - flags descriptor slots for reuse
+ * @slot: Slot to free
+ * Caller must hold &ppc440spe_chan->lock while calling this function
+ */
+static void ppc440spe_adma_free_slots(ppc440spe_desc_t *slot,
+		ppc440spe_ch_t *chan)
+{
+	int stride = slot->slots_per_op;
+
+	while (stride--) {
+		slot->slots_per_op = 0;
+		slot = list_entry(slot->slot_node.next,
+				ppc440spe_desc_t,
+				slot_node);
+	}
+}
+
+static void
+ppc440spe_adma_unmap(ppc440spe_ch_t *chan, ppc440spe_desc_t *desc)
+{
+	u32 src_cnt, dst_cnt;
+	dma_addr_t addr;
+
+	/*
+	 * get the number of sources & destination
+	 * included in this descriptor and unmap
+	 * them all
+	 */
+	src_cnt = ppc440spe_desc_get_src_num(desc, chan);
+	dst_cnt = ppc440spe_desc_get_dst_num(desc, chan);
+
+	/* unmap destinations */
+	if (!(desc->async_tx.flags & DMA_COMPL_SKIP_DEST_UNMAP)) {
+		while (dst_cnt--) {
+			addr = ppc440spe_desc_get_dest_addr(
+				desc, chan, dst_cnt);
+			dma_unmap_page(&chan->device->pdev->dev,
+					addr, desc->unmap_len,
+					DMA_FROM_DEVICE);
+		}
+	}
+
+	/* unmap sources */
+	if (!(desc->async_tx.flags & DMA_COMPL_SKIP_SRC_UNMAP)) {
+		while (src_cnt--) {
+			addr = ppc440spe_desc_get_src_addr(
+				desc, chan, src_cnt);
+			dma_unmap_page(&chan->device->pdev->dev,
+					addr, desc->unmap_len,
+					DMA_TO_DEVICE);
+		}
+	}
+}
+
+/**
+ * ppc440spe_adma_run_tx_complete_actions - call functions to be called
+ * upon complete
+ */
+static dma_cookie_t ppc440spe_adma_run_tx_complete_actions(
+		ppc440spe_desc_t *desc,
+		ppc440spe_ch_t *chan,
+		dma_cookie_t cookie)
+{
+	int i;
+
+	BUG_ON(desc->async_tx.cookie < 0);
+	if (desc->async_tx.cookie > 0) {
+		cookie = desc->async_tx.cookie;
+		desc->async_tx.cookie = 0;
+
+		/* call the callback (must not sleep or submit new
+		 * operations to this channel)
+		 */
+		if (desc->async_tx.callback)
+			desc->async_tx.callback(
+				desc->async_tx.callback_param);
+
+		/* unmap dma addresses
+		 * (unmap_single vs unmap_page?)
+		 *
+		 * actually, ppc's dma_unmap_page() functions are empty, so
+		 * the following code is just for the sake of completeness
+		 */
+		if (chan && chan->needs_unmap && desc->group_head &&
+		     desc->unmap_len) {
+			ppc440spe_desc_t *unmap = desc->group_head;
+			/* assume 1 slot per op always */
+			u32 slot_count = unmap->slot_cnt;
+
+			/* Run through the group list and unmap addresses */
+			for (i = 0; i < slot_count; i++) {
+				BUG_ON(!unmap);
+				ppc440spe_adma_unmap(chan, unmap);
+				unmap = unmap->hw_next;
+			}
+		}
+	}
+
+	/* run dependent operations */
+	async_tx_run_dependencies(&desc->async_tx);
+
+	return cookie;
+}
+
+/**
+ * ppc440spe_adma_clean_slot - clean up CDB slot (if ack is set)
+ */
+static int ppc440spe_adma_clean_slot(ppc440spe_desc_t *desc,
+		ppc440spe_ch_t *chan)
+{
+	/* the client is allowed to attach dependent operations
+	 * until 'ack' is set
+	 */
+	if (!async_tx_test_ack(&desc->async_tx))
+		return 0;
+
+	/* leave the last descriptor in the chain
+	 * so we can append to it
+	 */
+	if (list_is_last(&desc->chain_node, &chan->chain) ||
+	    desc->phys == ppc440spe_chan_get_current_descriptor(chan))
+		return 1;
+
+	if (chan->device->id != PPC440SPE_XOR_ID) {
+		/* our DMA interrupt handler clears opc field of
+		 * each processed descriptor. For all types of
+		 * operations except for ZeroSum we do not actually
+		 * need ack from the interrupt handler. ZeroSum is a
+		 * special case since the result of this operation
+		 * is available from the handler only, so if we see
+		 * such type of descriptor (which is unprocessed yet)
+		 * then leave it in chain.
+		 */
+		dma_cdb_t *cdb = desc->hw_desc;
+		if (cdb->opc == DMA_CDB_OPC_DCHECK128)
+			return 1;
+	}
+
+	dev_dbg(chan->device->common.dev, "\tfree slot %x: %d stride: %d\n",
+		desc->phys, desc->idx, desc->slots_per_op);
+
+	list_del(&desc->chain_node);
+	ppc440spe_adma_free_slots(desc, chan);
+	return 0;
+}
+
+/**
+ * __ppc440spe_adma_slot_cleanup - this is the common clean-up routine
+ *	which runs through the channel CDBs list until reach the descriptor
+ *	currently processed. When routine determines that all CDBs of group
+ *	are completed then corresponding callbacks (if any) are called and slots
+ *	are freed.
+ */
+static void __ppc440spe_adma_slot_cleanup(ppc440spe_ch_t *chan)
+{
+	ppc440spe_desc_t *iter, *_iter, *group_start = NULL;
+	dma_cookie_t cookie = 0;
+	u32 current_desc = ppc440spe_chan_get_current_descriptor(chan);
+	int busy = ppc440spe_chan_is_busy(chan);
+	int seen_current = 0, slot_cnt = 0, slots_per_op = 0;
+
+	dev_dbg(chan->device->common.dev, "ppc440spe adma%d: %s\n",
+		chan->device->id, __FUNCTION__);
+
+	if (!current_desc) {
+		/*  There were no transactions yet, so
+		 * nothing to clean
+		 */
+		return;
+	}
+
+	/* free completed slots from the chain starting with
+	 * the oldest descriptor
+	 */
+	list_for_each_entry_safe(iter, _iter, &chan->chain,
+					chain_node) {
+		dev_dbg(chan->device->common.dev, "\tcookie: %d slot: %d "
+		    "busy: %d this_desc: %#x next_desc: %#x cur: %#x ack: %d\n",
+		    iter->async_tx.cookie, iter->idx, busy, iter->phys,
+		    ppc440spe_desc_get_link(iter, chan), current_desc,
+		    async_tx_test_ack(&iter->async_tx));
+		prefetch(_iter);
+		prefetch(&_iter->async_tx);
+
+		/* do not advance past the current descriptor loaded into the
+		 * hardware channel,subsequent descriptors are either in process
+		 * or have not been submitted
+		 */
+		if (seen_current)
+			break;
+
+		/* stop the search if we reach the current descriptor and the
+		 * channel is busy, or if it appears that the current descriptor
+		 * needs to be re-read (i.e. has been appended to)
+		 */
+		if (iter->phys == current_desc) {
+			BUG_ON(seen_current++);
+			if (busy || ppc440spe_desc_get_link(iter, chan)) {
+				/* not all descriptors of the group have
+				 * been completed; exit.
+				 */
+				break;
+			}
+		}
+
+		/* detect the start of a group transaction */
+		if (!slot_cnt && !slots_per_op) {
+			slot_cnt = iter->slot_cnt;
+			slots_per_op = iter->slots_per_op;
+			if (slot_cnt <= slots_per_op) {
+				slot_cnt = 0;
+				slots_per_op = 0;
+			}
+		}
+
+		if (slot_cnt) {
+			if (!group_start)
+				group_start = iter;
+			slot_cnt -= slots_per_op;
+		}
+
+		/* all the members of a group are complete */
+		if (slots_per_op != 0 && slot_cnt == 0) {
+			ppc440spe_desc_t *grp_iter, *_grp_iter;
+			int end_of_chain = 0;
+
+			/* clean up the group */
+			slot_cnt = group_start->slot_cnt;
+			grp_iter = group_start;
+			list_for_each_entry_safe_from(grp_iter, _grp_iter,
+				&chan->chain, chain_node) {
+
+				cookie = ppc440spe_adma_run_tx_complete_actions(
+					grp_iter, chan, cookie);
+
+				slot_cnt -= slots_per_op;
+				end_of_chain = ppc440spe_adma_clean_slot(
+				    grp_iter, chan);
+				if (end_of_chain && slot_cnt) {
+					/* Should wait for ZeroSum complete */
+					if (cookie > 0)
+						chan->completed_cookie = cookie;
+					return;
+				}
+
+				if (slot_cnt == 0 || end_of_chain)
+					break;
+			}
+
+			/* the group should be complete at this point */
+			BUG_ON(slot_cnt);
+
+			slots_per_op = 0;
+			group_start = NULL;
+			if (end_of_chain)
+				break;
+			else
+				continue;
+		} else if (slots_per_op) /* wait for group completion */
+			continue;
+
+		cookie = ppc440spe_adma_run_tx_complete_actions(iter, chan,
+		    cookie);
+
+		if (ppc440spe_adma_clean_slot(iter, chan))
+			break;
+	}
+
+	BUG_ON(!seen_current);
+
+	if (cookie > 0) {
+		chan->completed_cookie = cookie;
+		pr_debug("\tcompleted cookie %d\n", cookie);
+	}
+
+}
+
+/**
+ * ppc440spe_adma_tasklet - clean up watch-dog initiator
+ */
+static void ppc440spe_adma_tasklet (unsigned long data)
+{
+	ppc440spe_ch_t *chan = (ppc440spe_ch_t *) data;
+	spin_lock(&chan->lock);
+	__ppc440spe_adma_slot_cleanup(chan);
+	spin_unlock(&chan->lock);
+}
+
+/**
+ * ppc440spe_adma_slot_cleanup - clean up scheduled initiator
+ */
+static void ppc440spe_adma_slot_cleanup (ppc440spe_ch_t *chan)
+{
+	spin_lock_bh(&chan->lock);
+	__ppc440spe_adma_slot_cleanup(chan);
+	spin_unlock_bh(&chan->lock);
+}
+
+/**
+ * ppc440spe_adma_alloc_slots - allocate free slots (if any)
+ */
+static ppc440spe_desc_t *ppc440spe_adma_alloc_slots(
+		ppc440spe_ch_t *chan, int num_slots,
+		int slots_per_op)
+{
+	ppc440spe_desc_t *iter = NULL, *_iter, *alloc_start = NULL;
+	struct list_head chain = LIST_HEAD_INIT(chain);
+	int slots_found, retry = 0;
+
+
+	BUG_ON(!num_slots || !slots_per_op);
+	/* start search from the last allocated descrtiptor
+	 * if a contiguous allocation can not be found start searching
+	 * from the beginning of the list
+	 */
+retry:
+	slots_found = 0;
+	if (retry == 0)
+		iter = chan->last_used;
+	else
+		iter = list_entry(&chan->all_slots, ppc440spe_desc_t,
+			slot_node);
+	list_for_each_entry_safe_continue(iter, _iter, &chan->all_slots,
+	    slot_node) {
+		prefetch(_iter);
+		prefetch(&_iter->async_tx);
+		if (iter->slots_per_op) {
+			slots_found = 0;
+			continue;
+		}
+
+		/* start the allocation if the slot is correctly aligned */
+		if (!slots_found++)
+			alloc_start = iter;
+
+		if (slots_found == num_slots) {
+			ppc440spe_desc_t *alloc_tail = NULL;
+			ppc440spe_desc_t *last_used = NULL;
+			iter = alloc_start;
+			while (num_slots) {
+				int i;
+				/* pre-ack all but the last descriptor */
+				if (num_slots != slots_per_op)
+					async_tx_ack(&iter->async_tx);
+
+				list_add_tail(&iter->chain_node, &chain);
+				alloc_tail = iter;
+				iter->async_tx.cookie = 0;
+				iter->hw_next = NULL;
+				iter->flags = 0;
+				iter->slot_cnt = num_slots;
+				iter->xor_check_result = NULL;
+				for (i = 0; i < slots_per_op; i++) {
+					iter->slots_per_op = slots_per_op - i;
+					last_used = iter;
+					iter = list_entry(iter->slot_node.next,
+						ppc440spe_desc_t,
+						slot_node);
+				}
+				num_slots -= slots_per_op;
+			}
+			alloc_tail->group_head = alloc_start;
+			alloc_tail->async_tx.cookie = -EBUSY;
+			list_splice(&chain, &alloc_tail->group_list);
+			chan->last_used = last_used;
+			return alloc_tail;
+		}
+	}
+	if (!retry++)
+		goto retry;
+
+	/* try to free some slots if the allocation fails */
+	tasklet_schedule(&chan->irq_tasklet);
+	return NULL;
+}
+
+/**
+ * ppc440spe_adma_alloc_chan_resources -  allocate pools for CDB slots
+ */
+static int ppc440spe_adma_alloc_chan_resources(struct dma_chan *chan,
+					       struct dma_client *client)
+{
+	ppc440spe_ch_t *ppc440spe_chan = to_ppc440spe_adma_chan(chan);
+	ppc440spe_desc_t *slot = NULL;
+	char *hw_desc;
+	int i, db_sz;
+	int init = ppc440spe_chan->slots_allocated ? 0 : 1;
+	ppc440spe_aplat_t *plat_data;
+
+	chan->chan_id = ppc440spe_chan->device->id;
+	plat_data = ppc440spe_chan->device->pdev->dev.platform_data;
+
+	/* Allocate descriptor slots */
+	i = ppc440spe_chan->slots_allocated;
+	if (ppc440spe_chan->device->id != PPC440SPE_XOR_ID)
+		db_sz = sizeof (dma_cdb_t);
+	else
+		db_sz = sizeof (xor_cb_t);
+
+	for (; i < (plat_data->pool_size/db_sz); i++) {
+		slot = kzalloc(sizeof(ppc440spe_desc_t), GFP_KERNEL);
+		if (!slot) {
+			printk(KERN_INFO "SPE ADMA Channel only initialized"
+				" %d descriptor slots", i--);
+			break;
+		}
+
+		hw_desc = (char *) ppc440spe_chan->device->dma_desc_pool_virt;
+		slot->hw_desc = (void *) &hw_desc[i * db_sz];
+		dma_async_tx_descriptor_init(&slot->async_tx, chan);
+		slot->async_tx.tx_submit = ppc440spe_adma_tx_submit;
+		INIT_LIST_HEAD(&slot->chain_node);
+		INIT_LIST_HEAD(&slot->slot_node);
+		INIT_LIST_HEAD(&slot->group_list);
+		hw_desc = (char *) ppc440spe_chan->device->dma_desc_pool;
+		slot->phys = (dma_addr_t) &hw_desc[i * db_sz];
+		slot->idx = i;
+
+		spin_lock_bh(&ppc440spe_chan->lock);
+		ppc440spe_chan->slots_allocated++;
+		list_add_tail(&slot->slot_node, &ppc440spe_chan->all_slots);
+		spin_unlock_bh(&ppc440spe_chan->lock);
+	}
+
+	if (i && !ppc440spe_chan->last_used) {
+		ppc440spe_chan->last_used =
+			list_entry(ppc440spe_chan->all_slots.next,
+				ppc440spe_desc_t,
+				slot_node);
+	}
+
+	dev_dbg(ppc440spe_chan->device->common.dev,
+		"ppc440spe adma%d: allocated %d descriptor slots\n",
+		ppc440spe_chan->device->id, i);
+
+	/* initialize the channel and the chain with a null operation */
+	if (init) {
+		switch (ppc440spe_chan->device->id)
+		{
+		case PPC440SPE_DMA0_ID:
+		case PPC440SPE_DMA1_ID:
+			ppc440spe_chan->hw_chain_inited = 0;
+			/* Use WXOR for self-testing */
+			if (!ppc440spe_r6_tchan)
+				ppc440spe_r6_tchan = ppc440spe_chan;
+			break;
+		case PPC440SPE_XOR_ID:
+			ppc440spe_chan_start_null_xor(ppc440spe_chan);
+			break;
+		default:
+			BUG();
+		}
+		ppc440spe_chan->needs_unmap = 1;
+	}
+
+	return (i > 0) ? i : -ENOMEM;
+}
+
+/**
+ * ppc440spe_desc_assign_cookie - assign a cookie
+ */
+static dma_cookie_t ppc440spe_desc_assign_cookie(ppc440spe_ch_t *chan,
+		ppc440spe_desc_t *desc)
+{
+	dma_cookie_t cookie = chan->common.cookie;
+	cookie++;
+	if (cookie < 0)
+		cookie = 1;
+	chan->common.cookie = desc->async_tx.cookie = cookie;
+	return cookie;
+}
+
+/**
+ * ppc440spe_rxor_set_region_data -
+ */
+static void ppc440spe_rxor_set_region (ppc440spe_desc_t *desc,
+	u8 xor_arg_no, u32 mask)
+{
+	xor_cb_t *xcb = desc->hw_desc;
+
+	xcb->ops [xor_arg_no].h |= mask;
+}
+
+/**
+ * ppc440spe_rxor_set_src -
+ */
+static void ppc440spe_rxor_set_src (ppc440spe_desc_t *desc,
+	u8 xor_arg_no, dma_addr_t addr)
+{
+	xor_cb_t *xcb = desc->hw_desc;
+
+	xcb->ops [xor_arg_no].h |= DMA_CUED_XOR_BASE;
+	xcb->ops [xor_arg_no].l = addr;
+}
+
+/**
+ * ppc440spe_rxor_set_mult -
+ */
+static void ppc440spe_rxor_set_mult (ppc440spe_desc_t *desc,
+	u8 xor_arg_no, u8 idx, u8 mult)
+{
+	xor_cb_t *xcb = desc->hw_desc;
+
+	xcb->ops [xor_arg_no].h |= mult << (DMA_CUED_MULT1_OFF + idx * 8);
+}
+
+/**
+ * ppc440spe_adma_check_threshold - append CDBs to h/w chain if threshold
+ *	has been achieved
+ */
+static void ppc440spe_adma_check_threshold(ppc440spe_ch_t *chan)
+{
+	dev_dbg(chan->device->common.dev, "ppc440spe adma%d: pending: %d\n",
+		chan->device->id, chan->pending);
+
+	if (chan->pending >= PPC440SPE_ADMA_THRESHOLD) {
+		chan->pending = 0;
+		ppc440spe_chan_append(chan);
+	}
+}
+
+/**
+ * ppc440spe_adma_tx_submit - submit new descriptor group to the channel
+ *	(it's not necessary that descriptors will be submitted to the h/w
+ *	chains too right now)
+ */
+static dma_cookie_t ppc440spe_adma_tx_submit(struct dma_async_tx_descriptor *tx)
+{
+	ppc440spe_desc_t *sw_desc = tx_to_ppc440spe_adma_slot(tx);
+	ppc440spe_ch_t *chan = to_ppc440spe_adma_chan(tx->chan);
+	ppc440spe_desc_t *group_start, *old_chain_tail;
+	int slot_cnt;
+	int slots_per_op;
+	dma_cookie_t cookie;
+
+	group_start = sw_desc->group_head;
+	slot_cnt = group_start->slot_cnt;
+	slots_per_op = group_start->slots_per_op;
+
+	spin_lock_bh(&chan->lock);
+
+	cookie = ppc440spe_desc_assign_cookie(chan, sw_desc);
+
+	if (unlikely(list_empty(&chan->chain))) {
+		/* first peer */
+		list_splice_init(&sw_desc->group_list, &chan->chain);
+		chan_first_cdb[chan->device->id] = group_start;
+	} else {
+		/* isn't first peer, bind CDBs to chain */
+		old_chain_tail = list_entry(chan->chain.prev,
+			ppc440spe_desc_t, chain_node);
+		list_splice_init(&sw_desc->group_list,
+		    &old_chain_tail->chain_node);
+		/* fix up the hardware chain */
+		ppc440spe_desc_set_link(chan, old_chain_tail, group_start);
+	}
+
+	/* increment the pending count by the number of operations */
+	chan->pending += slot_cnt / slots_per_op;
+	ppc440spe_adma_check_threshold(chan);
+	spin_unlock_bh(&chan->lock);
+
+	dev_dbg(chan->device->common.dev,
+		"ppc440spe adma%d: %s cookie: %d slot: %d tx %p\n",
+		chan->device->id,__FUNCTION__,
+		sw_desc->async_tx.cookie, sw_desc->idx, sw_desc);
+
+	return cookie;
+}
+
+/**
+ * ppc440spe_adma_prep_dma_interrupt - prepare CDB for a pseudo DMA operation
+ */
+static struct dma_async_tx_descriptor *ppc440spe_adma_prep_dma_interrupt(
+		struct dma_chan *chan, unsigned long flags)
+{
+	ppc440spe_ch_t *ppc440spe_chan = to_ppc440spe_adma_chan(chan);
+	ppc440spe_desc_t *sw_desc, *group_start;
+	int slot_cnt, slots_per_op;
+
+	dev_dbg(ppc440spe_chan->device->common.dev,
+		"ppc440spe adma%d: %s\n", ppc440spe_chan->device->id,
+		__FUNCTION__);
+
+	spin_lock_bh(&ppc440spe_chan->lock);
+	slot_cnt = slots_per_op = 1;
+	sw_desc = ppc440spe_adma_alloc_slots(ppc440spe_chan, slot_cnt,
+			slots_per_op);
+	if (sw_desc) {
+		group_start = sw_desc->group_head;
+		ppc440spe_desc_init_interrupt(group_start, ppc440spe_chan);
+		group_start->unmap_len = 0;
+		sw_desc->async_tx.flags = flags;
+	}
+	spin_unlock_bh(&ppc440spe_chan->lock);
+
+	return sw_desc ? &sw_desc->async_tx : NULL;
+}
+
+/**
+ * ppc440spe_adma_prep_dma_memcpy - prepare CDB for a MEMCPY operation
+ */
+static struct dma_async_tx_descriptor *ppc440spe_adma_prep_dma_memcpy(
+		struct dma_chan *chan, dma_addr_t dma_dest,
+		dma_addr_t dma_src, size_t len, unsigned long flags)
+{
+	ppc440spe_ch_t *ppc440spe_chan = to_ppc440spe_adma_chan(chan);
+	ppc440spe_desc_t *sw_desc, *group_start;
+	int slot_cnt, slots_per_op;
+	if (unlikely(!len))
+		return NULL;
+	BUG_ON(unlikely(len > PPC440SPE_ADMA_DMA_MAX_BYTE_COUNT));
+
+	spin_lock_bh(&ppc440spe_chan->lock);
+
+	dev_dbg(ppc440spe_chan->device->common.dev,
+		"ppc440spe adma%d: %s len: %u int_en %d\n",
+		ppc440spe_chan->device->id, __FUNCTION__, len,
+		flags & DMA_PREP_INTERRUPT ? 1 : 0);
+
+	slot_cnt = slots_per_op = 1;
+	sw_desc = ppc440spe_adma_alloc_slots(ppc440spe_chan, slot_cnt,
+		slots_per_op);
+	if (sw_desc) {
+		group_start = sw_desc->group_head;
+		ppc440spe_desc_init_memcpy(group_start, flags);
+		ppc440spe_adma_set_dest(group_start, dma_dest, 0);
+		ppc440spe_adma_memcpy_xor_set_src(group_start, dma_src, 0);
+		ppc440spe_desc_set_byte_count(group_start, ppc440spe_chan, len);
+		sw_desc->unmap_len = len;
+		sw_desc->async_tx.flags = flags;
+	}
+	spin_unlock_bh(&ppc440spe_chan->lock);
+
+	return sw_desc ? &sw_desc->async_tx : NULL;
+}
+
+/**
+ * ppc440spe_adma_prep_dma_memset - prepare CDB for a MEMSET operation
+ */
+static struct dma_async_tx_descriptor *ppc440spe_adma_prep_dma_memset(
+		struct dma_chan *chan, dma_addr_t dma_dest, int value,
+		size_t len, unsigned long flags)
+{
+	ppc440spe_ch_t *ppc440spe_chan = to_ppc440spe_adma_chan(chan);
+	ppc440spe_desc_t *sw_desc, *group_start;
+	int slot_cnt, slots_per_op;
+	if (unlikely(!len))
+		return NULL;
+	BUG_ON(unlikely(len > PPC440SPE_ADMA_DMA_MAX_BYTE_COUNT));
+
+	spin_lock_bh(&ppc440spe_chan->lock);
+
+	dev_dbg(ppc440spe_chan->device->common.dev,
+		"ppc440spe adma%d: %s cal: %u len: %u int_en %d\n",
+		ppc440spe_chan->device->id, __FUNCTION__, value, len,
+		flags & DMA_PREP_INTERRUPT ? 1 : 0);
+
+	slot_cnt = slots_per_op = 1;
+	sw_desc = ppc440spe_adma_alloc_slots(ppc440spe_chan, slot_cnt,
+		slots_per_op);
+	if (sw_desc) {
+		group_start = sw_desc->group_head;
+		ppc440spe_desc_init_memset(group_start, value, flags);
+		ppc440spe_adma_set_dest(group_start, dma_dest, 0);
+		ppc440spe_desc_set_byte_count(group_start, ppc440spe_chan, len);
+		sw_desc->unmap_len = len;
+		sw_desc->async_tx.flags = flags;
+	}
+	spin_unlock_bh(&ppc440spe_chan->lock);
+
+	return sw_desc ? &sw_desc->async_tx : NULL;
+}
+
+/**
+ * ppc440spe_adma_prep_dma_xor - prepare CDB for a XOR operation
+ */
+static struct dma_async_tx_descriptor *ppc440spe_adma_prep_dma_xor(
+		struct dma_chan *chan, dma_addr_t dma_dest,
+		dma_addr_t *dma_src, u32 src_cnt, size_t len,
+		unsigned long flags)
+{
+	ppc440spe_ch_t *ppc440spe_chan = to_ppc440spe_adma_chan(chan);
+	ppc440spe_desc_t *sw_desc, *group_start;
+	int slot_cnt, slots_per_op;
+
+#ifdef ADMA_LL_DEBUG
+	printk("\n%s(%d):\n\tsrc: ", __func__,
+		ppc440spe_chan->device->id);
+	for (slot_cnt=0; slot_cnt < src_cnt; slot_cnt++)
+		printk("0x%08x ", dma_src[slot_cnt]);
+	printk("\n\tdst: 0x%08x\n", dma_dest);
+#endif
+
+	if (unlikely(!len))
+		return NULL;
+	BUG_ON(unlikely(len > PPC440SPE_ADMA_XOR_MAX_BYTE_COUNT));
+
+	dev_dbg(ppc440spe_chan->device->common.dev,
+		"ppc440spe adma%d: %s src_cnt: %d len: %u int_en: %d\n",
+		ppc440spe_chan->device->id, __FUNCTION__, src_cnt, len,
+		flags & DMA_PREP_INTERRUPT ? 1 : 0);
+
+	spin_lock_bh(&ppc440spe_chan->lock);
+	slot_cnt = ppc440spe_chan_xor_slot_count(len, src_cnt, &slots_per_op);
+	sw_desc = ppc440spe_adma_alloc_slots(ppc440spe_chan, slot_cnt,
+			slots_per_op);
+	if (sw_desc) {
+		group_start = sw_desc->group_head;
+		ppc440spe_desc_init_xor(group_start, src_cnt, flags);
+		ppc440spe_adma_set_dest(group_start, dma_dest, 0);
+		while (src_cnt--)
+			ppc440spe_adma_memcpy_xor_set_src(group_start,
+				dma_src[src_cnt], src_cnt);
+		ppc440spe_desc_set_byte_count(group_start, ppc440spe_chan, len);
+		sw_desc->unmap_len = len;
+		sw_desc->async_tx.flags = flags;
+	}
+	spin_unlock_bh(&ppc440spe_chan->lock);
+
+	return sw_desc ? &sw_desc->async_tx : NULL;
+}
+
+static inline void ppc440spe_desc_set_xor_src_cnt (ppc440spe_desc_t *desc,
+		int src_cnt);
+static void ppc440spe_init_rxor_cursor (ppc440spe_rxor_cursor_t *cursor);
+
+/**
+ * ppc440spe_adma_init_dma2rxor_slot -
+ */
+static void ppc440spe_adma_init_dma2rxor_slot (ppc440spe_desc_t *desc,
+		dma_addr_t *src, int src_cnt)
+{
+	int i;
+	/* initialize CDB */
+	for (i=0; i<src_cnt; i++) {
+		ppc440spe_adma_dma2rxor_prep_src(desc,
+			&desc->rxor_cursor,
+			i, desc->src_cnt,
+			(u32)src[i]);
+	}
+}
+
+static inline ppc440spe_desc_t *ppc440spe_dma01_prep_pq (
+		ppc440spe_ch_t *ppc440spe_chan,
+		dma_addr_t *dst, int dst_cnt, dma_addr_t *src, int src_cnt,
+		unsigned char *scf, size_t len, unsigned long flags)
+{
+	int slot_cnt;
+	ppc440spe_desc_t *sw_desc = NULL, *iter;
+	unsigned long op = 0;
+
+	/*  select operations WXOR/RXOR depending on the
+	 * source addresses of operators and the number
+	 * of destinations (RXOR support only Q-parity calculations)
+	 */
+	set_bit(PPC440SPE_DESC_WXOR, &op);
+	if (!test_and_set_bit(PPC440SPE_RXOR_RUN, &ppc440spe_rxor_state)) {
+		/* no active RXOR;
+		 * do RXOR if:
+		 * - there are more than 1 source,
+		 * - len is aligned on 512-byte boundary,
+		 * - source addresses fit to one of 4 possible regions.
+		 */
+		if (src_cnt > 1 &&
+		    !(len & MQ0_CF2H_RXOR_BS_MASK) &&
+		    (src[0] + len) == src[1]) {
+			/* may do RXOR R1 R2 */
+			set_bit(PPC440SPE_DESC_RXOR, &op);
+			if (src_cnt != 2) {
+				/* may try to enhance region of RXOR */
+				if ((src[1] + len) == src[2]) {
+					/* do RXOR R1 R2 R3 */
+					set_bit(PPC440SPE_DESC_RXOR123,
+						&op);
+				} else if ((src[1] + len * 2) == src[2]) {
+					/* do RXOR R1 R2 R4 */
+					set_bit(PPC440SPE_DESC_RXOR124, &op);
+				} else if ((src[1] + len * 3) == src[2]) {
+					/* do RXOR R1 R2 R5 */
+					set_bit(PPC440SPE_DESC_RXOR125,
+						&op);
+				} else {
+					/* do RXOR R1 R2 */
+					set_bit(PPC440SPE_DESC_RXOR12,
+						&op);
+				}
+			} else {
+				/* do RXOR R1 R2 */
+				set_bit(PPC440SPE_DESC_RXOR12, &op);
+			}
+		}
+
+		if (!test_bit(PPC440SPE_DESC_RXOR, &op)) {
+			/* can not do this operation with RXOR */
+			clear_bit(PPC440SPE_RXOR_RUN,
+				&ppc440spe_rxor_state);
+		} else {
+			/* can do; set block size right now */
+			ppc440spe_desc_set_rxor_block_size(len);
+		}
+	}
+
+	/* Number of necessary slots depends on operation type selected */
+	if (!test_bit(PPC440SPE_DESC_RXOR, &op)) {
+		/*  This is a WXOR only chain. Need descriptors for each
+		 * source to GF-XOR them with WXOR, and need descriptors
+		 * for each destination to zero them with WXOR
+		 */
+		slot_cnt = src_cnt;
+
+		if (flags & DMA_PREP_ZERO_P) {
+			slot_cnt++;
+			set_bit(PPC440SPE_ZERO_P, &op);
+		}
+		if (flags & DMA_PREP_ZERO_Q) {
+			slot_cnt++;
+			set_bit(PPC440SPE_ZERO_Q, &op);
+		}
+	} else {
+		/*  Need 1/2 descriptor for RXOR operation, and
+		 * need (src_cnt - (2 or 3)) for WXOR of sources
+		 * remained (if any)
+		 */
+		slot_cnt = dst_cnt;
+
+		if (flags & DMA_PREP_ZERO_P)
+			set_bit(PPC440SPE_ZERO_P, &op);
+		if (flags & DMA_PREP_ZERO_Q)
+			set_bit(PPC440SPE_ZERO_Q, &op);
+
+		if (test_bit(PPC440SPE_DESC_RXOR12, &op))
+			slot_cnt += src_cnt - 2;
+		else
+			slot_cnt += src_cnt - 3;
+
+		/*  Thus we have either RXOR only chain or
+		 * mixed RXOR/WXOR
+		 */
+		if (slot_cnt == dst_cnt)
+			/* RXOR only chain */
+			clear_bit(PPC440SPE_DESC_WXOR, &op);
+	}
+
+	spin_lock_bh(&ppc440spe_chan->lock);
+	/* for both RXOR/WXOR each descriptor occupies one slot */
+	sw_desc = ppc440spe_adma_alloc_slots(ppc440spe_chan, slot_cnt, 1);
+	if (sw_desc) {
+		ppc440spe_desc_init_dma01pq(sw_desc, dst_cnt, src_cnt,
+				flags, op);
+
+		/* setup dst/src/mult */
+		ppc440spe_adma_pq_set_dest(sw_desc, dst);
+		while(src_cnt--) {
+			ppc440spe_adma_pq_set_src(sw_desc, src[src_cnt],
+						  src_cnt);
+
+			/* NOTE: "Multi = 0 is equivalent to = 1" as it
+			 * stated in 440SPSPe_RAID6_Addendum_UM_1_17.pdf
+			 * doesn't work for RXOR with DMA0/1! Instead, multi=0
+			 * leads to zeroing source data after RXOR.
+			 * So, for P case set-up mult=1 explicitly.
+			 */
+			ppc440spe_adma_pq_set_src_mult(sw_desc,
+				dst[1] ? scf[src_cnt] : 1, src_cnt,
+				dst_cnt - 1);
+		}
+
+		/* Setup byte count foreach slot just allocated */
+		sw_desc->async_tx.flags = flags;
+		list_for_each_entry(iter, &sw_desc->group_list,
+				chain_node) {
+			ppc440spe_desc_set_byte_count(iter,
+				ppc440spe_chan, len);
+			iter->unmap_len = len;
+		}
+	}
+	spin_unlock_bh(&ppc440spe_chan->lock);
+
+	return sw_desc;
+}
+
+static inline ppc440spe_desc_t *ppc440spe_dma2_prep_pq (
+		ppc440spe_ch_t *ppc440spe_chan,
+		dma_addr_t *dst, int dst_cnt, dma_addr_t *src, int src_cnt,
+		unsigned char *scf, size_t len, unsigned long flags)
+{
+	int slot_cnt, descs_per_op;
+	ppc440spe_desc_t *sw_desc = NULL, *iter;
+	unsigned long op = 0;
+
+	BUG_ON(!dst_cnt);
+
+	spin_lock_bh(&ppc440spe_chan->lock);
+	descs_per_op = ppc440spe_dma2_pq_slot_count(src, src_cnt, len);
+
+	/* depending on number of sources we have 1 or 2 RXOR chains */
+	slot_cnt = descs_per_op * dst_cnt;
+
+	sw_desc = ppc440spe_adma_alloc_slots(ppc440spe_chan, slot_cnt, 1);
+	if (sw_desc) {
+		op = slot_cnt;
+		sw_desc->async_tx.flags = flags;
+		list_for_each_entry(iter, &sw_desc->group_list, chain_node) {
+			ppc440spe_desc_init_dma2pq(iter, dst_cnt, src_cnt,
+				--op ? 0 : flags);
+			ppc440spe_desc_set_byte_count(iter, ppc440spe_chan,
+				len);
+			iter->unmap_len = len;
+
+			ppc440spe_init_rxor_cursor(&(iter->rxor_cursor));
+			iter->rxor_cursor.len = len;
+			iter->descs_per_op = descs_per_op;
+		}
+		op = 0;
+		list_for_each_entry(iter, &sw_desc->group_list, chain_node) {
+			op++;
+			if (op % descs_per_op == 0)
+				ppc440spe_adma_init_dma2rxor_slot (iter, src,
+								   src_cnt);
+			if (likely(!list_is_last(&iter->chain_node,
+					&sw_desc->group_list))) {
+				/* set 'next' pointer */
+				iter->hw_next = list_entry(
+						  iter->chain_node.next,
+						  ppc440spe_desc_t, chain_node);
+				ppc440spe_xor_set_link(iter, iter->hw_next);
+			} else {
+				/* this is the last descriptor. */
+				iter->hw_next = NULL;
+			}
+		}
+
+		/* fixup head descriptor */
+		sw_desc->dst_cnt = dst_cnt;
+		if (flags & DMA_PREP_ZERO_P)
+			set_bit(PPC440SPE_ZERO_P, &sw_desc->flags);
+		if (flags & DMA_PREP_ZERO_Q)
+			set_bit(PPC440SPE_ZERO_Q, &sw_desc->flags);
+
+		/* setup dst/src/mult */
+		ppc440spe_adma_pq_set_dest(sw_desc, dst);
+
+		while(src_cnt--) {
+			/* handle descriptors (if dst_cnt == 2) inside
+			 * the ppc440spe_adma_pq_set_srcxxx() functions
+			 */
+			ppc440spe_adma_pq_set_src(sw_desc, src[src_cnt],
+						  src_cnt);
+			ppc440spe_adma_pq_set_src_mult(sw_desc,
+					dst[1] ? scf[src_cnt] : 1, src_cnt,
+					dst_cnt - 1);
+		}
+	}
+	spin_unlock_bh(&ppc440spe_chan->lock);
+	ppc440spe_desc_set_rxor_block_size(len);
+	return sw_desc;
+}
+
+/**
+ * ppc440spe_adma_prep_dma_pq - prepare CDB (group) for a GF-XOR operation
+ */
+static struct dma_async_tx_descriptor *ppc440spe_adma_prep_dma_pq(
+		struct dma_chan *chan, dma_addr_t *dst, dma_addr_t *src,
+		unsigned int src_cnt, unsigned char *scf,
+		size_t len, unsigned long flags)
+{
+	ppc440spe_ch_t *ppc440spe_chan = to_ppc440spe_adma_chan(chan);
+	ppc440spe_desc_t *sw_desc = NULL;
+	int dst_cnt = 0;
+
+#ifdef ADMA_LL_DEBUG
+	printk("\n%s(%d):\n\tsrc: ", __func__,
+		ppc440spe_chan->device->id);
+	for (dst_cnt=0; dst_cnt < src_cnt; dst_cnt++)
+		printk("0x%08x ", src[dst_cnt]);
+	printk("\n\tdst: ");
+	for (dst_cnt=0; dst_cnt < 2; dst_cnt++)
+		printk("0x%08x ", dst[dst_cnt]);
+	printk("\n");
+	dst_cnt = 0;
+#endif
+
+	BUG_ON(!len);
+	BUG_ON(unlikely(len > PPC440SPE_ADMA_XOR_MAX_BYTE_COUNT));
+	BUG_ON(!src_cnt);
+
+	if (dst[0])
+		dst_cnt++;
+	else
+		BUG_ON(flags & DMA_PREP_ZERO_P);
+	if (dst[1])
+		dst_cnt++;
+	else
+		BUG_ON(flags & DMA_PREP_ZERO_Q);
+	BUG_ON(!dst_cnt);
+
+	dev_dbg(ppc440spe_chan->device->common.dev,
+		"ppc440spe adma%d: %s src_cnt: %d len: %u int_en: %d\n",
+		ppc440spe_chan->device->id, __FUNCTION__, src_cnt, len,
+		flags & DMA_PREP_INTERRUPT ? 1 : 0);
+
+	switch (ppc440spe_chan->device->id) {
+	case PPC440SPE_DMA0_ID:
+	case PPC440SPE_DMA1_ID:
+		sw_desc = ppc440spe_dma01_prep_pq (ppc440spe_chan,
+				dst, dst_cnt, src, src_cnt, scf,
+				len, flags);
+		break;
+
+	case PPC440SPE_XOR_ID:
+		sw_desc = ppc440spe_dma2_prep_pq (ppc440spe_chan,
+				dst, dst_cnt, src, src_cnt, scf,
+				len, flags);
+		break;
+	}
+
+	return sw_desc ? &sw_desc->async_tx : NULL;
+}
+
+/**
+ * ppc440spe_adma_prep_dma_pqzero_sum - prepare CDB group for
+ * a PQZERO_SUM operation
+ */
+static struct dma_async_tx_descriptor *ppc440spe_adma_prep_dma_pqzero_sum(
+		struct dma_chan *chan, dma_addr_t *src, unsigned int src_cnt,
+		unsigned char *scf, size_t len,
+		u32 *presult, u32 *qresult, unsigned long flags)
+{
+	ppc440spe_ch_t *ppc440spe_chan = to_ppc440spe_adma_chan(chan);
+	ppc440spe_desc_t *sw_desc, *iter;
+	dma_addr_t pdest = src[src_cnt], qdest = src[src_cnt+1];
+	int slot_cnt, slots_per_op, idst, dst_cnt;
+
+#ifdef ADMA_LL_DEBUG
+	printk("\n%s(%d):\n\tsrc(coef): ", __func__,
+		ppc440spe_chan->device->id);
+	for (idst=0; idst < src_cnt; idst++) {
+		printk("0x%08x(0x%02x) ", src[idst], scf[idst]);
+	}
+	printk("\n\tdst: ");
+	for (idst=0; idst < 2; idst++)
+		printk("0x%08x ", src[src_cnt+idst]);
+	printk("\n");
+#endif
+
+	BUG_ON(src_cnt < 3 || !src[0]);
+
+	/* Always use WXOR for P/Q calculations (two destinations).
+	 * Need 1 or 2 extra slots to verify results are zero.
+	 */
+	idst = dst_cnt = (pdest && qdest) ? 2 : 1;
+
+	slot_cnt = src_cnt + dst_cnt;
+	slots_per_op = 1;
+
+	spin_lock_bh(&ppc440spe_chan->lock);
+	sw_desc = ppc440spe_adma_alloc_slots(ppc440spe_chan, slot_cnt,
+	    slots_per_op);
+	if (sw_desc) {
+		ppc440spe_desc_init_dma01pqzero_sum(sw_desc, dst_cnt, src_cnt);
+
+		/* Setup byte count foreach slot just allocated */
+		sw_desc->async_tx.flags = flags;
+		list_for_each_entry(iter, &sw_desc->group_list, chain_node) {
+			ppc440spe_desc_set_byte_count(iter, ppc440spe_chan,
+			    len);
+			iter->unmap_len = len;
+		}
+
+		/* Setup destinations for P/Q ops */
+		ppc440spe_adma_pqzero_sum_set_dest(sw_desc, pdest, qdest);
+
+		/* Setup sources and mults for P/Q ops */
+		while (src_cnt--) {
+			ppc440spe_adma_pqzero_sum_set_src(sw_desc,
+				src[src_cnt], src_cnt);
+			/* Setup mults for Q-check only; in case of P -
+			 * keep the default 0 (==1)
+			 */
+			if (qdest)
+				ppc440spe_adma_pqzero_sum_set_src_mult(sw_desc,
+					scf[src_cnt], src_cnt, dst_cnt - 1);
+		}
+
+		/* Setup zero QWORDs into DCHECK CDBs */
+		idst = dst_cnt;
+		list_for_each_entry_reverse(iter, &sw_desc->group_list,
+		    chain_node) {
+			/*
+			 * The last CDB corresponds to Q-parity check,
+			 * the one before last CDB corresponds
+			 * P-parity check
+			 */
+			if (idst == DMA_DEST_MAX_NUM) {
+				iter->xor_check_result = (idst == dst_cnt) ?
+					qresult : presult;
+			} else {
+				iter->xor_check_result = qdest ?
+					qresult : presult;
+			}
+			/*
+			 * set it to zero, if check fail then result will
+			 * be updated
+			 */
+			*iter->xor_check_result = 0;
+			ppc440spe_desc_set_dcheck(iter, ppc440spe_chan,
+				ppc440spe_qword);
+
+			if (!(--dst_cnt))
+				break;
+		}
+	}
+	spin_unlock_bh(&ppc440spe_chan->lock);
+	return sw_desc ? &sw_desc->async_tx : NULL;
+}
+
+/**
+ * ppc440spe_adma_set_dest - set destination address into descriptor
+ */
+static void ppc440spe_adma_set_dest(ppc440spe_desc_t *sw_desc,
+		dma_addr_t addr, int index)
+{
+	ppc440spe_ch_t *chan = to_ppc440spe_adma_chan(sw_desc->async_tx.chan);
+	BUG_ON(index >= sw_desc->dst_cnt);
+
+	switch (chan->device->id) {
+	case PPC440SPE_DMA0_ID:
+	case PPC440SPE_DMA1_ID:
+		/* to do: support transfers lengths >
+		 * PPC440SPE_ADMA_DMA/XOR_MAX_BYTE_COUNT
+		 */
+		ppc440spe_desc_set_dest_addr(sw_desc->group_head,
+			chan, 0, addr, index);
+		break;
+	case PPC440SPE_XOR_ID:
+		sw_desc = ppc440spe_get_group_entry(sw_desc, index);
+		ppc440spe_desc_set_dest_addr(sw_desc,
+			chan, 0, addr, index);
+		break;
+	}
+}
+
+static void ppc440spe_adma_pq_zero_op(ppc440spe_desc_t *iter,
+		ppc440spe_ch_t *chan, dma_addr_t addr)
+{
+	/*  To clear destinations update the descriptor
+	 * (P or Q depending on index) as follows:
+	 * addr is destination (0 corresponds to SG2):
+	 */
+	ppc440spe_desc_set_dest_addr(iter, chan, DMA_CUED_XOR_BASE, addr, 0);
+
+	/* ... and the addr is source: */
+	ppc440spe_desc_set_src_addr(iter, chan, 0, DMA_CUED_XOR_HB, addr);
+
+	/* addr is always SG2 then the mult is always DST1 */
+	ppc440spe_desc_set_src_mult(iter, chan, DMA_CUED_MULT1_OFF,
+				    DMA_CDB_SG_DST1, 1);
+}
+
+/**
+ * ppc440spe_adma_pq_set_dest - set destination address into descriptor
+ * for the PQXOR operation
+ */
+static void ppc440spe_adma_pq_set_dest(ppc440spe_desc_t *sw_desc,
+		dma_addr_t *addrs)
+{
+	ppc440spe_desc_t *iter;
+	ppc440spe_ch_t *chan = to_ppc440spe_adma_chan(sw_desc->async_tx.chan);
+	dma_addr_t paddr = addrs[0], qaddr = addrs[1];
+	dma_addr_t addr = 0, ppath, qpath;
+	int index = 0, i;
+
+	if (!paddr || !qaddr)
+		addr = paddr ? paddr : qaddr;
+
+	switch (chan->device->id) {
+	case PPC440SPE_DMA0_ID:
+	case PPC440SPE_DMA1_ID:
+		/* walk through the WXOR source list and set P/Q-destinations
+		 * for each slot:
+		 */
+		if (!test_bit(PPC440SPE_DESC_RXOR, &sw_desc->flags)) {
+			/* This is WXOR-only chain; may have 1/2 zero descs */
+			if (test_bit(PPC440SPE_ZERO_P, &sw_desc->flags))
+				index++;
+			if (test_bit(PPC440SPE_ZERO_Q, &sw_desc->flags))
+				index++;
+
+			iter = ppc440spe_get_group_entry(sw_desc, index);
+			if (addr) {
+				/* one destination */
+				list_for_each_entry_from(iter,
+					&sw_desc->group_list, chain_node)
+					ppc440spe_desc_set_dest_addr(iter, chan,
+						DMA_CUED_XOR_BASE, addr, 0);
+			} else {
+				/* two destinations */
+				list_for_each_entry_from(iter,
+					&sw_desc->group_list, chain_node) {
+					ppc440spe_desc_set_dest_addr(iter, chan,
+						DMA_CUED_XOR_BASE, paddr, 0);
+					ppc440spe_desc_set_dest_addr(iter, chan,
+						DMA_CUED_XOR_BASE, qaddr, 1);
+				}
+			}
+
+			if (index) {
+				/*  To clear destinations update the descriptor
+				 * (1st,2nd, or both depending on flags)
+				 */
+				index = 0;
+				if (test_bit(PPC440SPE_ZERO_P,
+						&sw_desc->flags)) {
+					iter = ppc440spe_get_group_entry(
+							sw_desc, index++);
+					ppc440spe_adma_pq_zero_op(iter, chan,
+							paddr);
+				}
+
+				if (test_bit(PPC440SPE_ZERO_Q,
+						&sw_desc->flags)) {
+					iter = ppc440spe_get_group_entry(
+							sw_desc, index++);
+					ppc440spe_adma_pq_zero_op(iter, chan,
+							qaddr);
+				}
+
+				return;
+			}
+		} else {
+			/* This is RXOR-only or RXOR/WXOR mixed chain */
+
+			/* If we want to include destination into calculations,
+			 * then make dest addresses cued with mult=1 (XOR).
+			 */
+			ppath = test_bit(PPC440SPE_ZERO_P, &sw_desc->flags) ?
+					DMA_CUED_XOR_HB :
+					DMA_CUED_XOR_BASE |
+						(1 << DMA_CUED_MULT1_OFF);
+			qpath = test_bit(PPC440SPE_ZERO_Q, &sw_desc->flags) ?
+					DMA_CUED_XOR_HB :
+					DMA_CUED_XOR_BASE |
+						(1 << DMA_CUED_MULT1_OFF);
+
+			/* Setup destination(s) in RXOR slot(s) */
+			iter = ppc440spe_get_group_entry (sw_desc, index++);
+			ppc440spe_desc_set_dest_addr(iter, chan,
+						paddr ? ppath : qpath,
+						paddr ? paddr : qaddr, 0);
+			if (!addr) {
+				/* two destinations */
+				iter = ppc440spe_get_group_entry (sw_desc,
+								  index++);
+				ppc440spe_desc_set_dest_addr(iter, chan,
+						qpath, qaddr, 0);
+			}
+
+			if (test_bit(PPC440SPE_DESC_WXOR, &sw_desc->flags)) {
+				/* Setup destination(s) in remaining WXOR
+				 * slots
+				 */
+				iter = ppc440spe_get_group_entry(sw_desc,
+								 index);
+	                        if (addr) {
+					/* one destination */
+					list_for_each_entry_from(iter,
+					    &sw_desc->group_list,
+					    chain_node)
+						ppc440spe_desc_set_dest_addr(
+							iter, chan,
+							DMA_CUED_XOR_BASE,
+							addr, 0);
+
+				} else {
+					/* two destinations */
+					list_for_each_entry_from(iter,
+					    &sw_desc->group_list,
+					    chain_node) {
+						ppc440spe_desc_set_dest_addr(
+							iter, chan,
+							DMA_CUED_XOR_BASE,
+							paddr, 0);
+						ppc440spe_desc_set_dest_addr(
+							iter, chan,
+							DMA_CUED_XOR_BASE,
+							qaddr, 1);
+					}
+				}
+			}
+
+		}
+		break;
+
+	case PPC440SPE_XOR_ID:
+		/* DMA2 descriptors have only 1 destination, so there are
+		 * two chains - one for each dest.
+		 * If we want to include destination into calculations,
+		 * then make dest addresses cued with mult=1 (XOR).
+		 */
+		ppath = test_bit(PPC440SPE_ZERO_P, &sw_desc->flags) ?
+				DMA_CUED_XOR_HB :
+				DMA_CUED_XOR_BASE |
+					(1 << DMA_CUED_MULT1_OFF);
+
+		qpath = test_bit(PPC440SPE_ZERO_Q, &sw_desc->flags) ?
+				DMA_CUED_XOR_HB :
+				DMA_CUED_XOR_BASE |
+					(1 << DMA_CUED_MULT1_OFF);
+
+		iter = ppc440spe_get_group_entry (sw_desc, 0);
+		for (i=0; i<sw_desc->descs_per_op; i++) {
+			ppc440spe_desc_set_dest_addr(iter, chan,
+				paddr ? ppath : qpath,
+				paddr ? paddr : qaddr, 0);
+			iter = list_entry (iter->chain_node.next,
+				ppc440spe_desc_t, chain_node);
+		}
+
+		if (!addr) {
+			/* Two destinations; setup Q here */
+			iter = ppc440spe_get_group_entry (sw_desc,
+				sw_desc->descs_per_op);
+			for (i=0; i<sw_desc->descs_per_op; i++) {
+				ppc440spe_desc_set_dest_addr(iter,
+					chan, qpath, qaddr, 0);
+				iter = list_entry (iter->chain_node.next,
+					ppc440spe_desc_t, chain_node);
+			}
+		}
+
+		break;
+	}
+}
+
+/**
+ * ppc440spe_adma_pq_zero_sum_set_dest - set destination address into descriptor
+ * for the PQZERO_SUM operation
+ */
+static void ppc440spe_adma_pqzero_sum_set_dest	(ppc440spe_desc_t *sw_desc,
+		dma_addr_t paddr, dma_addr_t qaddr)
+{
+	ppc440spe_desc_t *iter, *end;
+	ppc440spe_ch_t *chan = to_ppc440spe_adma_chan(sw_desc->async_tx.chan);
+	dma_addr_t addr = 0;
+
+	/* walk through the WXOR source list and set P/Q-destinations
+	 * for each slot
+	 */
+	end = ppc440spe_get_group_entry(sw_desc, sw_desc->src_cnt);
+	if (paddr && qaddr) {
+		/* two destinations */
+		list_for_each_entry(iter, &sw_desc->group_list, chain_node) {
+			if (unlikely(iter == end))
+				break;
+			ppc440spe_desc_set_dest_addr(iter, chan,
+						DMA_CUED_XOR_BASE, paddr, 0);
+			ppc440spe_desc_set_dest_addr(iter, chan,
+						DMA_CUED_XOR_BASE, qaddr, 1);
+		}
+	} else {
+		/* one destination */
+		addr = paddr ? paddr : qaddr;
+		list_for_each_entry(iter, &sw_desc->group_list, chain_node) {
+			if (unlikely(iter == end))
+				break;
+			ppc440spe_desc_set_dest_addr(iter, chan,
+						DMA_CUED_XOR_BASE, addr, 0);
+		}
+	}
+
+	/*  The descriptors remain are DATACHECK. These have no need in
+	 * destination. Actually, these destination are used there
+	 * as a sources for check operation. So, set addr as source.
+	 */
+	end = ppc440spe_get_group_entry(sw_desc, sw_desc->src_cnt);
+	ppc440spe_desc_set_src_addr(end, chan, 0, 0, addr ? addr : paddr);
+
+	if (!addr) {
+		end = ppc440spe_get_group_entry(sw_desc, sw_desc->src_cnt + 1);
+		ppc440spe_desc_set_src_addr(end, chan, 0, 0, qaddr);
+	}
+}
+
+/**
+ * ppc440spe_desc_set_xor_src_cnt (ppc440spe_desc_t *desc, int src_cnt)
+ */
+static inline void ppc440spe_desc_set_xor_src_cnt (ppc440spe_desc_t *desc,
+		int src_cnt)
+{
+	xor_cb_t *hw_desc = desc->hw_desc;
+	hw_desc->cbc &= ~XOR_CDCR_OAC_MSK;
+	hw_desc->cbc |= src_cnt;
+}
+
+/**
+ * ppc440spe_adma_pq_set_src - set source address into descriptor
+ */
+static void ppc440spe_adma_pq_set_src(ppc440spe_desc_t *sw_desc,
+		dma_addr_t addr, int index)
+{
+	ppc440spe_ch_t *chan = to_ppc440spe_adma_chan(sw_desc->async_tx.chan);
+	dma_addr_t haddr = 0;
+	ppc440spe_desc_t *iter = NULL;
+
+	switch (chan->device->id) {
+	case PPC440SPE_DMA0_ID:
+	case PPC440SPE_DMA1_ID:
+		/* DMA0,1 may do: WXOR, RXOR, RXOR+WXORs chain
+		 */
+		if (test_bit(PPC440SPE_DESC_RXOR, &sw_desc->flags)) {
+			/* RXOR-only or RXOR/WXOR operation */
+			int iskip = test_bit(PPC440SPE_DESC_RXOR12,
+				&sw_desc->flags) ?  2 : 3;
+
+			if (index == 0) {
+				/* 1st slot (RXOR) */
+				/* setup sources region (R1-2-3, R1-2-4,
+				 * or R1-2-5)
+				 */
+				if (test_bit(PPC440SPE_DESC_RXOR12,
+						&sw_desc->flags))
+					haddr = DMA_RXOR12 <<
+						DMA_CUED_REGION_OFF;
+				else if (test_bit(PPC440SPE_DESC_RXOR123,
+				    &sw_desc->flags))
+					haddr = DMA_RXOR123 <<
+						DMA_CUED_REGION_OFF;
+				else if (test_bit(PPC440SPE_DESC_RXOR124,
+				    &sw_desc->flags))
+					haddr = DMA_RXOR124 <<
+						DMA_CUED_REGION_OFF;
+				else if (test_bit(PPC440SPE_DESC_RXOR125,
+				    &sw_desc->flags))
+					haddr = DMA_RXOR125 <<
+						DMA_CUED_REGION_OFF;
+				else
+					BUG();
+				haddr |= DMA_CUED_XOR_BASE;
+				iter = ppc440spe_get_group_entry(sw_desc, 0);
+			} else if (index < iskip) {
+				/* 1st slot (RXOR)
+				 * shall actually set source address only once
+				 * instead of first <iskip>
+				 */
+				iter = NULL;
+			} else {
+				/* 2nd/3d and next slots (WXOR);
+				 * skip first slot with RXOR
+				 */
+				haddr = DMA_CUED_XOR_HB;
+				iter = ppc440spe_get_group_entry(sw_desc,
+				    index - iskip + sw_desc->dst_cnt);
+			}
+		} else {
+			int znum = 0;
+
+			/* WXOR-only operation; skip first slots with
+			 * zeroing destinations
+			 */
+			if (test_bit(PPC440SPE_ZERO_P, &sw_desc->flags))
+				znum++;
+			if (test_bit(PPC440SPE_ZERO_Q, &sw_desc->flags))
+				znum++;
+
+			haddr = DMA_CUED_XOR_HB;
+			iter = ppc440spe_get_group_entry(sw_desc,
+					index + znum);
+		}
+
+		if (likely(iter)) {
+			ppc440spe_desc_set_src_addr(iter, chan, 0, haddr, addr);
+
+			if (!index &&
+			    test_bit(PPC440SPE_DESC_RXOR, &sw_desc->flags) &&
+			    sw_desc->dst_cnt == 2) {
+				/* if we have two destinations for RXOR, then
+				 * setup source in the second descr too
+				 */
+				iter = ppc440spe_get_group_entry(sw_desc, 1);
+				ppc440spe_desc_set_src_addr(iter, chan, 0,
+					haddr, addr);
+			}
+		}
+		break;
+
+	case PPC440SPE_XOR_ID:
+		/* DMA2 may do Biskup */
+		iter = sw_desc->group_head;
+		if (iter->dst_cnt == 2) {
+			/* both P & Q calculations required; set P src here */
+			ppc440spe_adma_dma2rxor_set_src(iter, index, addr);
+
+			/* this is for Q */
+			iter = ppc440spe_get_group_entry(sw_desc,
+				sw_desc->descs_per_op);
+		}
+		ppc440spe_adma_dma2rxor_set_src(iter, index, addr);
+		break;
+	}
+}
+
+/**
+ * ppc440spe_adma_pqzero_sum_set_src - set source address into descriptor
+ */
+static void ppc440spe_adma_pqzero_sum_set_src(ppc440spe_desc_t *sw_desc,
+		dma_addr_t addr, int index)
+{
+	ppc440spe_ch_t *chan = to_ppc440spe_adma_chan(sw_desc->async_tx.chan);
+	dma_addr_t haddr = DMA_CUED_XOR_HB;
+
+	sw_desc = ppc440spe_get_group_entry(sw_desc, index);
+
+	if (likely(sw_desc))
+		ppc440spe_desc_set_src_addr(sw_desc, chan, 0, haddr, addr);
+}
+
+/**
+ * ppc440spe_adma_memcpy_xor_set_src - set source address into descriptor
+ */
+static void ppc440spe_adma_memcpy_xor_set_src(ppc440spe_desc_t *sw_desc,
+		dma_addr_t addr, int index)
+{
+	ppc440spe_ch_t *chan = to_ppc440spe_adma_chan(sw_desc->async_tx.chan);
+
+	sw_desc = sw_desc->group_head;
+
+	if (likely(sw_desc))
+		ppc440spe_desc_set_src_addr(sw_desc, chan, index, 0, addr);
+}
+
+/**
+ * ppc440spe_adma_dma2rxor_inc_addr  -
+ */
+static void ppc440spe_adma_dma2rxor_inc_addr (ppc440spe_desc_t *desc,
+	ppc440spe_rxor_cursor_t *cursor, int index, int src_cnt)
+{
+	cursor->addr_count++;
+	if (index == src_cnt-1) {
+		ppc440spe_desc_set_xor_src_cnt (desc,
+			cursor->addr_count);
+	} else if (cursor->addr_count == XOR_MAX_OPS) {
+		ppc440spe_desc_set_xor_src_cnt (desc,
+			cursor->addr_count);
+		cursor->addr_count = 0;
+		cursor->desc_count++;
+	}
+}
+
+/**
+ * ppc440spe_adma_dma2rxor_prep_src - setup RXOR types in DMA2 CDB
+ */
+static int ppc440spe_adma_dma2rxor_prep_src (ppc440spe_desc_t *hdesc,
+		ppc440spe_rxor_cursor_t *cursor, int index,
+		int src_cnt, u32 addr)
+{
+	int rval = 0;
+	u32 sign;
+	ppc440spe_desc_t *desc = hdesc;
+	int i;
+
+	for (i=0;i<cursor->desc_count;i++) {
+		desc = list_entry (hdesc->chain_node.next, ppc440spe_desc_t,
+			chain_node);
+	}
+
+	switch (cursor->state) {
+		case 0:
+			if (addr == cursor->addrl + cursor->len ) {
+				/* direct RXOR */
+				cursor->state = 1;
+				cursor->xor_count++;
+				if (index == src_cnt-1) {
+					ppc440spe_rxor_set_region (desc,
+						cursor->addr_count,
+						DMA_RXOR12 <<
+							DMA_CUED_REGION_OFF);
+					ppc440spe_adma_dma2rxor_inc_addr (
+						desc, cursor, index, src_cnt);
+				}
+			} else if (cursor->addrl == addr + cursor->len) {
+				/* reverse RXOR */
+				cursor->state = 1;
+				cursor->xor_count++;
+				set_bit (cursor->addr_count,
+						&desc->reverse_flags[0]);
+				if (index == src_cnt-1) {
+					ppc440spe_rxor_set_region (desc,
+						cursor->addr_count,
+						DMA_RXOR12 <<
+							DMA_CUED_REGION_OFF);
+					ppc440spe_adma_dma2rxor_inc_addr (
+						desc, cursor, index, src_cnt);
+				}
+			} else {
+				printk (KERN_ERR "Cannot build "
+					"DMA2 RXOR command block.\n");
+				BUG ();
+			}
+			break;
+		case 1:
+			sign = test_bit (cursor->addr_count,
+					desc->reverse_flags)
+				? -1 : 1;
+			if (index == src_cnt-2 || (sign == -1
+				&& addr != cursor->addrl - 2*cursor->len)) {
+				cursor->state = 0;
+				cursor->xor_count = 1;
+				cursor->addrl = addr;
+				ppc440spe_rxor_set_region (desc,
+					cursor->addr_count,
+					DMA_RXOR12 << DMA_CUED_REGION_OFF);
+				ppc440spe_adma_dma2rxor_inc_addr (
+					desc, cursor, index, src_cnt);
+			} else if (addr == cursor->addrl + 2*sign*cursor->len) {
+				cursor->state = 2;
+				cursor->xor_count = 0;
+				ppc440spe_rxor_set_region (desc,
+					cursor->addr_count,
+					DMA_RXOR123 << DMA_CUED_REGION_OFF);
+				if (index == src_cnt-1) {
+					ppc440spe_adma_dma2rxor_inc_addr (
+						desc, cursor, index, src_cnt);
+				}
+			} else if (addr == cursor->addrl + 3*cursor->len) {
+				cursor->state = 2;
+				cursor->xor_count = 0;
+				ppc440spe_rxor_set_region (desc,
+					cursor->addr_count,
+					DMA_RXOR124 << DMA_CUED_REGION_OFF);
+				if (index == src_cnt-1) {
+					ppc440spe_adma_dma2rxor_inc_addr (
+						desc, cursor, index, src_cnt);
+				}
+			} else if (addr == cursor->addrl + 4*cursor->len) {
+				cursor->state = 2;
+				cursor->xor_count = 0;
+				ppc440spe_rxor_set_region (desc,
+					cursor->addr_count,
+					DMA_RXOR125 << DMA_CUED_REGION_OFF);
+				if (index == src_cnt-1) {
+					ppc440spe_adma_dma2rxor_inc_addr (
+						desc, cursor, index, src_cnt);
+				}
+			} else {
+				cursor->state = 0;
+				cursor->xor_count = 1;
+				cursor->addrl = addr;
+				ppc440spe_rxor_set_region (desc,
+					cursor->addr_count,
+					DMA_RXOR12 << DMA_CUED_REGION_OFF);
+				ppc440spe_adma_dma2rxor_inc_addr (
+					desc, cursor, index, src_cnt);
+			}
+			break;
+		case 2:
+			cursor->state = 0;
+			cursor->addrl = addr;
+			cursor->xor_count++;
+			if (index) {
+				ppc440spe_adma_dma2rxor_inc_addr (
+					desc, cursor, index, src_cnt);
+			}
+			break;
+	}
+
+	return rval;
+}
+
+/**
+ * ppc440spe_adma_dma2rxor_set_src - set RXOR source address; it's assumed that
+ *	ppc440spe_adma_dma2rxor_prep_src() has already done prior this call
+ */
+static void ppc440spe_adma_dma2rxor_set_src (ppc440spe_desc_t *desc,
+		int index, dma_addr_t addr)
+{
+	xor_cb_t *xcb = desc->hw_desc;
+	int k = 0, op = 0, lop = 0;
+
+	/* get the RXOR operand which corresponds to index addr */
+	while (op <= index) {
+		lop = op;
+		if (k == XOR_MAX_OPS) {
+			k = 0;
+			desc = list_entry(desc->chain_node.next,
+				ppc440spe_desc_t, chain_node);
+			xcb = desc->hw_desc;
+
+		}
+		if ((xcb->ops[k++].h & (DMA_RXOR12 << DMA_CUED_REGION_OFF)) ==
+		    (DMA_RXOR12 << DMA_CUED_REGION_OFF))
+			op += 2;
+		else
+			op += 3;
+	}
+
+	BUG_ON(k < 1);
+
+	if (test_bit(k-1, desc->reverse_flags)) {
+		/* reverse operand order; put last op in RXOR group */
+		if (index == op - 1)
+			ppc440spe_rxor_set_src(desc, k - 1, addr);
+	} else {
+		/* direct operand order; put first op in RXOR group */
+		if (index == lop)
+			ppc440spe_rxor_set_src(desc, k - 1, addr);
+	}
+}
+
+/**
+ * ppc440spe_adma_dma2rxor_set_mult - set RXOR multipliers; it's assumed that
+ *	ppc440spe_adma_dma2rxor_prep_src() has already done prior this call
+ */
+static void ppc440spe_adma_dma2rxor_set_mult (ppc440spe_desc_t *desc,
+		int index, u8 mult)
+{
+	xor_cb_t *xcb = desc->hw_desc;
+	int k = 0, op = 0, lop = 0;
+
+	/* get the RXOR operand which corresponds to index mult */
+	while (op <= index) {
+		lop = op;
+		if (k == XOR_MAX_OPS) {
+			k = 0;
+			desc = list_entry (desc->chain_node.next,
+				ppc440spe_desc_t, chain_node);
+			xcb = desc->hw_desc;
+
+		}
+		if ((xcb->ops[k++].h & (DMA_RXOR12 << DMA_CUED_REGION_OFF)) ==
+		    (DMA_RXOR12 << DMA_CUED_REGION_OFF))
+			op += 2;
+		else
+			op += 3;
+	}
+
+	BUG_ON(k < 1);
+	if (test_bit(k-1, desc->reverse_flags)) {
+		/* reverse order */
+		ppc440spe_rxor_set_mult(desc, k - 1, op - index - 1, mult);
+	} else {
+		/* direct order */
+		ppc440spe_rxor_set_mult(desc, k - 1, index - lop, mult);
+	}
+}
+
+/**
+ * ppc440spe_init_rxor_cursor -
+ */
+static void ppc440spe_init_rxor_cursor (ppc440spe_rxor_cursor_t *cursor)
+{
+	memset (cursor, 0, sizeof (ppc440spe_rxor_cursor_t));
+	cursor->state = 2;
+}
+
+/**
+ * ppc440spe_adma_pq_set_src_mult - set multiplication coefficient into
+ * descriptor for the PQXOR operation
+ */
+static void ppc440spe_adma_pq_set_src_mult (ppc440spe_desc_t *sw_desc,
+		unsigned char mult, int index, int dst_pos)
+{
+	ppc440spe_ch_t *chan = to_ppc440spe_adma_chan(sw_desc->async_tx.chan);
+	u32 mult_idx, mult_dst;
+	ppc440spe_desc_t *iter = NULL, *iter1 = NULL;
+
+	switch (chan->device->id) {
+	case PPC440SPE_DMA0_ID:
+	case PPC440SPE_DMA1_ID:
+		if (test_bit(PPC440SPE_DESC_RXOR, &sw_desc->flags)) {
+			int region = test_bit(PPC440SPE_DESC_RXOR12,
+					&sw_desc->flags) ? 2 : 3;
+
+			if (index < region) {
+				/* RXOR multipliers */
+				iter = ppc440spe_get_group_entry(sw_desc,
+					sw_desc->dst_cnt - 1);
+				if (sw_desc->dst_cnt == 2)
+					iter1 = ppc440spe_get_group_entry(
+							sw_desc, 0);
+
+				mult_idx = DMA_CUED_MULT1_OFF + (index << 3);
+				mult_dst = DMA_CDB_SG_SRC;
+			} else {
+				/* WXOR multiplier */
+				iter = ppc440spe_get_group_entry(sw_desc,
+							index - region +
+							sw_desc->dst_cnt);
+				mult_idx = DMA_CUED_MULT1_OFF;
+				mult_dst = dst_pos ? DMA_CDB_SG_DST2 :
+						     DMA_CDB_SG_DST1;
+			}
+		} else {
+			int znum = 0;
+
+			/* WXOR-only;
+			 * skip first slots with destinations (if ZERO_DST has
+			 * place)
+			 */
+			if (test_bit(PPC440SPE_ZERO_P, &sw_desc->flags))
+				znum++;
+			if (test_bit(PPC440SPE_ZERO_Q, &sw_desc->flags))
+				znum++;
+
+			iter = ppc440spe_get_group_entry(sw_desc, index + znum);
+			mult_idx = DMA_CUED_MULT1_OFF;
+			mult_dst = dst_pos ? DMA_CDB_SG_DST2 : DMA_CDB_SG_DST1;
+		}
+
+		if (likely(iter)) {
+			ppc440spe_desc_set_src_mult(iter, chan,
+				mult_idx, mult_dst, mult);
+
+			if (unlikely(iter1)) {
+				/* if we have two destinations for RXOR, then
+				 * we've just set Q mult. Set-up P now.
+				 */
+				ppc440spe_desc_set_src_mult(iter1, chan,
+					mult_idx, mult_dst, 1);
+                        }
+
+		}
+		break;
+
+	case PPC440SPE_XOR_ID:
+		iter = sw_desc->group_head;
+		if (sw_desc->dst_cnt == 2) {
+			/* both P & Q calculations required; set P mult here */
+			ppc440spe_adma_dma2rxor_set_mult(iter, index, 1);
+
+			/* and then set Q mult */
+			iter = ppc440spe_get_group_entry(sw_desc,
+			       sw_desc->descs_per_op);
+		}
+		ppc440spe_adma_dma2rxor_set_mult(iter, index, mult);
+		break;
+	}
+}
+
+/**
+ * ppc440spe_adma_pqzero_sum_set_src_mult - set multiplication coefficient
+ * into descriptor for the PQZERO_SUM operation
+ */
+static void ppc440spe_adma_pqzero_sum_set_src_mult (ppc440spe_desc_t *sw_desc,
+		unsigned char mult, int index, int dst_pos)
+{
+	ppc440spe_ch_t *chan = to_ppc440spe_adma_chan(sw_desc->async_tx.chan);
+	u32 mult_idx, mult_dst;
+
+	/* set mult for sources only */
+	BUG_ON(index >= sw_desc->src_cnt);
+
+	/* get pointed slot */
+	sw_desc = ppc440spe_get_group_entry(sw_desc, index);
+
+	mult_idx = DMA_CUED_MULT1_OFF;
+	mult_dst = dst_pos ? DMA_CDB_SG_DST2 : DMA_CDB_SG_DST1;
+
+	if (likely(sw_desc))
+		ppc440spe_desc_set_src_mult(sw_desc, chan, mult_idx, mult_dst,
+		    mult);
+}
+
+/**
+ * ppc440spe_adma_free_chan_resources - free the resources allocated
+ */
+static void ppc440spe_adma_free_chan_resources(struct dma_chan *chan)
+{
+	ppc440spe_ch_t *ppc440spe_chan = to_ppc440spe_adma_chan(chan);
+	ppc440spe_desc_t *iter, *_iter;
+	int in_use_descs = 0;
+
+	ppc440spe_adma_slot_cleanup(ppc440spe_chan);
+
+	spin_lock_bh(&ppc440spe_chan->lock);
+	list_for_each_entry_safe(iter, _iter, &ppc440spe_chan->chain,
+					chain_node) {
+		in_use_descs++;
+		list_del(&iter->chain_node);
+	}
+	list_for_each_entry_safe_reverse(iter, _iter,
+			&ppc440spe_chan->all_slots, slot_node) {
+		list_del(&iter->slot_node);
+		kfree(iter);
+		ppc440spe_chan->slots_allocated--;
+	}
+	ppc440spe_chan->last_used = NULL;
+
+	dev_dbg(ppc440spe_chan->device->common.dev,
+		"ppc440spe adma%d %s slots_allocated %d\n",
+		ppc440spe_chan->device->id,
+		__FUNCTION__, ppc440spe_chan->slots_allocated);
+	spin_unlock_bh(&ppc440spe_chan->lock);
+
+	/* one is ok since we left it on there on purpose */
+	if (in_use_descs > 1)
+		printk(KERN_ERR "SPE: Freeing %d in use descriptors!\n",
+			in_use_descs - 1);
+}
+
+/**
+ * ppc440spe_adma_is_complete - poll the status of an ADMA transaction
+ * @chan: ADMA channel handle
+ * @cookie: ADMA transaction identifier
+ */
+static enum dma_status ppc440spe_adma_is_complete(struct dma_chan *chan,
+	dma_cookie_t cookie, dma_cookie_t *done, dma_cookie_t *used)
+{
+	ppc440spe_ch_t *ppc440spe_chan = to_ppc440spe_adma_chan(chan);
+	dma_cookie_t last_used;
+	dma_cookie_t last_complete;
+	enum dma_status ret;
+
+	last_used = chan->cookie;
+	last_complete = ppc440spe_chan->completed_cookie;
+
+	if (done)
+		*done= last_complete;
+	if (used)
+		*used = last_used;
+
+	ret = dma_async_is_complete(cookie, last_complete, last_used);
+	if (ret == DMA_SUCCESS)
+		return ret;
+
+	ppc440spe_adma_slot_cleanup(ppc440spe_chan);
+
+	last_used = chan->cookie;
+	last_complete = ppc440spe_chan->completed_cookie;
+
+	if (done)
+		*done= last_complete;
+	if (used)
+		*used = last_used;
+
+	return dma_async_is_complete(cookie, last_complete, last_used);
+}
+
+/**
+ * ppc440spe_adma_eot_handler - end of transfer interrupt handler
+ */
+static irqreturn_t ppc440spe_adma_eot_handler(int irq, void *data)
+{
+	ppc440spe_ch_t *chan = data;
+
+	dev_dbg(chan->device->common.dev,
+		"ppc440spe adma%d: %s\n", chan->device->id, __FUNCTION__);
+
+	tasklet_schedule(&chan->irq_tasklet);
+	ppc440spe_adma_device_clear_eot_status(chan);
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * ppc440spe_adma_err_handler - DMA error interrupt handler;
+ *	do the same things as a eot handler
+ */
+static irqreturn_t ppc440spe_adma_err_handler(int irq, void *data)
+{
+	ppc440spe_ch_t *chan = data;
+	dev_dbg(chan->device->common.dev,
+		"ppc440spe adma%d: %s\n", chan->device->id, __FUNCTION__);
+	tasklet_schedule(&chan->irq_tasklet);
+	ppc440spe_adma_device_clear_eot_status(chan);
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * ppc440spe_test_callback - called when test operation has been done
+ */
+static void ppc440spe_test_callback (void *unused)
+{
+	complete(&ppc440spe_r6_test_comp);
+}
+
+/**
+ * ppc440spe_adma_issue_pending - flush all pending descriptors to h/w
+ */
+static void ppc440spe_adma_issue_pending(struct dma_chan *chan)
+{
+	ppc440spe_ch_t *ppc440spe_chan = to_ppc440spe_adma_chan(chan);
+
+	dev_dbg(ppc440spe_chan->device->common.dev,
+	    "ppc440spe adma%d: %s %d \n", ppc440spe_chan->device->id,
+	    __FUNCTION__, ppc440spe_chan->pending);
+
+	if (ppc440spe_chan->pending) {
+		ppc440spe_chan->pending = 0;
+		ppc440spe_chan_append(ppc440spe_chan);
+	}
+}
+
+/**
+ * ppc440spe_adma_remove - remove the asynch device
+ */
+static int __devexit ppc440spe_adma_remove(struct platform_device *dev)
+{
+	ppc440spe_dev_t *device = platform_get_drvdata(dev);
+	struct dma_chan *chan, *_chan;
+	struct ppc_dma_chan_ref *ref, *_ref;
+	ppc440spe_ch_t *ppc440spe_chan;
+	int i;
+	ppc440spe_aplat_t *plat_data = dev->dev.platform_data;
+
+	if (dev->id < PPC440SPE_ADMA_ENGINES_NUM)
+		ppc_adma_devices[dev->id] = -1;
+
+	dma_async_device_unregister(&device->common);
+
+	for (i = 0; i < 3; i++) {
+		u32 irq;
+		irq = platform_get_irq(dev, i);
+		free_irq(irq, device);
+	}
+
+	dma_free_coherent(&dev->dev, plat_data->pool_size,
+			device->dma_desc_pool_virt, device->dma_desc_pool);
+
+	iounmap(dma_regs[dev->id]);
+
+	do {
+		struct resource *res;
+		res = platform_get_resource(dev, IORESOURCE_MEM, 0);
+		release_mem_region(res->start, res->end - res->start);
+	} while (0);
+
+	list_for_each_entry_safe(chan, _chan, &device->common.channels,
+				device_node) {
+		ppc440spe_chan = to_ppc440spe_adma_chan(chan);
+		list_del(&chan->device_node);
+		kfree(ppc440spe_chan);
+	}
+
+	list_for_each_entry_safe(ref, _ref, &ppc_adma_chan_list, node) {
+		list_del(&ref->node);
+		kfree(ref);
+	}
+
+	kfree(device);
+
+	return 0;
+}
+
+/**
+ * ppc440spe_adma_probe - probe the asynch device
+ */
+static int __devinit ppc440spe_adma_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	int ret=0, irq1, irq2, initcode = PPC_ADMA_INIT_OK;
+	void *regs;
+	ppc440spe_dev_t *adev;
+	ppc440spe_ch_t *chan;
+	ppc440spe_aplat_t *plat_data;
+	struct ppc_dma_chan_ref *ref;
+	struct device_node *dp;
+	char s[10];
+
+	dev_dbg(&pdev->dev, "%s: %i\n",__FUNCTION__,__LINE__);
+
+	plat_data = pdev->dev.platform_data;
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		initcode = PPC_ADMA_INIT_MEMRES;
+		ret = -ENODEV;
+		dev_err(&pdev->dev, "failed to get memory resource\n");
+		goto out;
+	}
+
+	if (!request_mem_region(res->start, res->end - res->start,
+				pdev->name)) {
+		initcode = PPC_ADMA_INIT_MEMREG;
+		ret = -EBUSY;
+		dev_err(&pdev->dev, "failed to request memory region "
+				"(0x%16llx-0x%16llx)\n",
+				(unsigned long long)res->start,
+				(unsigned long long)res->end);
+		goto out;
+	}
+
+	/* create a device */
+	if ((adev = kzalloc(sizeof(*adev), GFP_KERNEL)) == NULL) {
+		initcode = PPC_ADMA_INIT_ALLOC;
+		ret = -ENOMEM;
+		dev_err(&pdev->dev, "failed to get %d bytes of memory "
+				"for adev structure\n", sizeof(*adev));
+		goto err_adev_alloc;
+	}
+
+	/* allocate coherent memory for hardware descriptors
+	 * note: writecombine gives slightly better performance, but
+	 * requires that we explicitly drain the write buffer
+	 */
+	if ((adev->dma_desc_pool_virt = dma_alloc_coherent(&pdev->dev,
+	     plat_data->pool_size, &adev->dma_desc_pool, GFP_KERNEL)) == NULL) {
+		initcode = PPC_ADMA_INIT_COHERENT;
+		ret = -ENOMEM;
+		dev_err(&pdev->dev, "failed to allocate %d bytes of coherent "
+				"memory for hardware descriptors\n",
+				plat_data->pool_size);
+		goto err_dma_alloc;
+	}
+
+	regs = ioremap(pdev->resource[0].start, pdev->resource[0].end -
+		       pdev->resource[0].start + 1);
+	if (!regs) {
+		dev_err(&pdev->dev, "failed to map regs!\n");
+		goto err_regs_alloc;
+	}
+	dma_regs[pdev->id] = regs;
+
+	dev_dbg(&pdev->dev, "%s: allocted descriptor pool virt %p phys %p\n",
+		__FUNCTION__, adev->dma_desc_pool_virt,
+		(void *) adev->dma_desc_pool);
+
+	adev->id = plat_data->hw_id;
+	adev->common.cap_mask = plat_data->cap_mask;
+	adev->pdev = pdev;
+	platform_set_drvdata(pdev, adev);
+
+	INIT_LIST_HEAD(&adev->common.channels);
+
+	/* set base routines */
+	adev->common.device_alloc_chan_resources =
+	    ppc440spe_adma_alloc_chan_resources;
+	adev->common.device_free_chan_resources =
+	    ppc440spe_adma_free_chan_resources;
+	adev->common.device_is_tx_complete = ppc440spe_adma_is_complete;
+	adev->common.device_issue_pending = ppc440spe_adma_issue_pending;
+	adev->common.dev = &pdev->dev;
+
+	/* set prep routines based on capability */
+	if (dma_has_cap(DMA_MEMCPY, adev->common.cap_mask)) {
+		adev->common.device_prep_dma_memcpy =
+		    ppc440spe_adma_prep_dma_memcpy;
+	}
+	if (dma_has_cap(DMA_MEMSET, adev->common.cap_mask)) {
+		adev->common.device_prep_dma_memset =
+		    ppc440spe_adma_prep_dma_memset;
+	}
+	if (dma_has_cap(DMA_XOR, adev->common.cap_mask)) {
+		adev->common.max_xor = XOR_MAX_OPS;
+		adev->common.device_prep_dma_xor = ppc440spe_adma_prep_dma_xor;
+	}
+	if (dma_has_cap(DMA_PQ, adev->common.cap_mask)) {
+		switch (adev->id) {
+		case PPC440SPE_DMA0_ID:
+			adev->common.max_pq = DMA0_FIFO_SIZE /
+						sizeof(dma_cdb_t);
+			break;
+		case PPC440SPE_DMA1_ID:
+			adev->common.max_pq = DMA1_FIFO_SIZE /
+						sizeof(dma_cdb_t);
+			break;
+		case PPC440SPE_XOR_ID:
+			adev->common.max_pq = XOR_MAX_OPS * 3;
+			break;
+		}
+		adev->common.device_prep_dma_pq =
+		    ppc440spe_adma_prep_dma_pq;
+	}
+	if (dma_has_cap(DMA_PQ_ZERO_SUM, adev->common.cap_mask)) {
+		switch (adev->id) {
+		case PPC440SPE_DMA0_ID:
+			adev->common.max_pq = DMA0_FIFO_SIZE /
+						sizeof(dma_cdb_t);
+			break;
+		case PPC440SPE_DMA1_ID:
+			adev->common.max_pq = DMA1_FIFO_SIZE /
+						sizeof(dma_cdb_t);
+			break;
+		}
+		adev->common.device_prep_dma_pqzero_sum =
+		    ppc440spe_adma_prep_dma_pqzero_sum;
+	}
+	if (dma_has_cap(DMA_INTERRUPT, adev->common.cap_mask)) {
+		adev->common.device_prep_dma_interrupt =
+		    ppc440spe_adma_prep_dma_interrupt;
+	}
+
+	/* create a channel */
+	if ((chan = kzalloc(sizeof(*chan), GFP_KERNEL)) == NULL) {
+		initcode = PPC_ADMA_INIT_CHANNEL;
+		ret = -ENOMEM;
+		dev_err(&pdev->dev, "failed to allocate %d bytes of memory "
+				"for channel\n", sizeof(*chan));
+		goto err_chan_alloc;
+	}
+
+	tasklet_init(&chan->irq_tasklet, ppc440spe_adma_tasklet,
+	    (unsigned long)chan);
+
+	if (adev->id != PPC440SPE_XOR_ID) {
+		sprintf(s, "/plb/dma%d", adev->id);
+		dp = of_find_node_by_path(s);
+		irq2 = irq_of_parse_and_map(dp, 1);
+		if (irq2 == NO_IRQ)
+			irq2 = -ENXIO;
+	} else {
+		dp = of_find_node_by_path("/plb/xor");
+		irq2 = -ENXIO;
+	}
+
+	if (!dp)
+		printk("Can't get %s node\n", adev->id != PPC440SPE_XOR_ID ? s :
+			"/plb/xor");
+
+	irq1 = irq_of_parse_and_map(dp, 0);
+	if (irq1 == NO_IRQ)
+		irq1 = -ENXIO;
+	of_node_put(dp);
+
+	if (irq1 >= 0) {
+		ret = request_irq(irq1, ppc440spe_adma_eot_handler,
+			0, pdev->name, chan);
+		if (ret) {
+			initcode = PPC_ADMA_INIT_IRQ1;
+			ret = -EIO;
+			dev_err(&pdev->dev, "failed to request irq %d\n", irq1);
+			goto err_irq;
+		}
+
+		/* only DMA engines have a separate err IRQ
+		 * so it's Ok if irq < 0 in XOR case
+		 */
+		if (irq2 >= 0) {
+			/* both DMA engines share common error IRQ */
+			ret = request_irq(irq2, ppc440spe_adma_err_handler,
+				IRQF_SHARED, pdev->name, chan);
+			if (ret) {
+				initcode = PPC_ADMA_INIT_IRQ2;
+				ret = -EIO;
+				dev_err(&pdev->dev, "failed to request "
+						"irq %d\n", irq2);
+				goto err_irq;
+			}
+		}
+	} else {
+		ret = -ENXIO;
+		dev_warn(&pdev->dev, "no irq resource?\n");
+	}
+
+	chan->device = adev;
+	spin_lock_init(&chan->lock);
+	INIT_LIST_HEAD(&chan->chain);
+	INIT_LIST_HEAD(&chan->all_slots);
+	INIT_RCU_HEAD(&chan->common.rcu);
+	chan->common.device = &adev->common;
+	list_add_tail(&chan->common.device_node, &adev->common.channels);
+
+	dev_dbg(&pdev->dev,  "AMCC(R) PPC440SP(E) ADMA Engine found [%d]: "
+	  "( %s%s%s%s%s%s%s%s%s%s)\n",
+	  adev->id,
+	  dma_has_cap(DMA_PQ, adev->common.cap_mask) ? "pq " : "",
+	  dma_has_cap(DMA_PQ_UPDATE, adev->common.cap_mask) ? "pq_update " : "",
+	  dma_has_cap(DMA_PQ_ZERO_SUM, adev->common.cap_mask) ? "pq_zero_sum " :
+	    "",
+	  dma_has_cap(DMA_XOR, adev->common.cap_mask) ? "xor " : "",
+	  dma_has_cap(DMA_DUAL_XOR, adev->common.cap_mask) ? "dual_xor " : "",
+	  dma_has_cap(DMA_ZERO_SUM, adev->common.cap_mask) ? "xor_zero_sum " :
+	    "",
+	  dma_has_cap(DMA_MEMSET, adev->common.cap_mask)  ? "memset " : "",
+	  dma_has_cap(DMA_MEMCPY_CRC32C, adev->common.cap_mask) ? "memcpy+crc "
+	    : "",
+	  dma_has_cap(DMA_MEMCPY, adev->common.cap_mask) ? "memcpy " : "",
+	  dma_has_cap(DMA_INTERRUPT, adev->common.cap_mask) ? "int " : "");
+
+	ret = dma_async_device_register(&adev->common);
+	if (ret) {
+		initcode = PPC_ADMA_INIT_REGISTER;
+		dev_err(&pdev->dev, "failed to register dma async device");
+		goto err_irq;
+	}
+
+	ref = kmalloc(sizeof(*ref), GFP_KERNEL);
+	if (ref) {
+		ref->chan = &chan->common;
+		INIT_LIST_HEAD(&ref->node);
+		list_add_tail(&ref->node, &ppc_adma_chan_list);
+	} else
+		dev_warn(&pdev->dev, "failed to allocate channel reference!\n");
+	goto out;
+
+err_irq:
+	kfree(chan);
+err_chan_alloc:
+	iounmap(dma_regs[pdev->id]);
+err_regs_alloc:
+	dma_free_coherent(&adev->pdev->dev, plat_data->pool_size,
+			adev->dma_desc_pool_virt, adev->dma_desc_pool);
+err_dma_alloc:
+	kfree(adev);
+err_adev_alloc:
+	release_mem_region(res->start, res->end - res->start);
+out:
+	if (pdev->id < PPC440SPE_ADMA_ENGINES_NUM)
+		ppc_adma_devices[pdev->id] = initcode;
+
+	return ret;
+}
+
+/**
+ * ppc440spe_chan_start_null_xor - initiate the first XOR operation (DMA engines
+ *	use FIFOs (as opposite to chains used in XOR) so this is a XOR
+ *	specific operation)
+ */
+static void ppc440spe_chan_start_null_xor(ppc440spe_ch_t *chan)
+{
+	ppc440spe_desc_t *sw_desc, *group_start;
+	dma_cookie_t cookie;
+	int slot_cnt, slots_per_op;
+
+	dev_dbg(chan->device->common.dev,
+		"ppc440spe adma%d: %s\n", chan->device->id, __FUNCTION__);
+
+	spin_lock_bh(&chan->lock);
+	slot_cnt = ppc440spe_chan_xor_slot_count(0, 2, &slots_per_op);
+	sw_desc = ppc440spe_adma_alloc_slots(chan, slot_cnt, slots_per_op);
+	if (sw_desc) {
+		group_start = sw_desc->group_head;
+		list_splice_init(&sw_desc->group_list, &chan->chain);
+		async_tx_ack(&sw_desc->async_tx);
+		ppc440spe_desc_init_null_xor(group_start);
+
+		cookie = chan->common.cookie;
+		cookie++;
+		if (cookie <= 1)
+			cookie = 2;
+
+		/* initialize the completed cookie to be less than
+		 * the most recently used cookie
+		 */
+		chan->completed_cookie = cookie - 1;
+		chan->common.cookie = sw_desc->async_tx.cookie = cookie;
+
+		/* channel should not be busy */
+		BUG_ON(ppc440spe_chan_is_busy(chan));
+
+		/* set the descriptor address */
+		ppc440spe_chan_set_first_xor_descriptor(chan, sw_desc);
+
+		/* run the descriptor */
+		ppc440spe_chan_run(chan);
+	} else
+		printk(KERN_ERR "ppc440spe adma%d"
+			" failed to allocate null descriptor\n",
+			chan->device->id);
+	spin_unlock_bh(&chan->lock);
+}
+
+/**
+ * ppc440spe_test_raid6 - test are RAID-6 capabilities enabled successfully.
+ *	For this we just perform one WXOR operation with the same source
+ *	and destination addresses, the GF-multiplier is 1; so if RAID-6
+ *	capabilities are enabled then we'll get src/dst filled with zero.
+ */
+static int ppc440spe_test_raid6 (ppc440spe_ch_t *chan)
+{
+	ppc440spe_desc_t *sw_desc, *iter;
+	struct page *pg;
+	char *a;
+	dma_addr_t dma_addr, addrs[2];
+	unsigned long op = 0;
+	int rval = 0;
+
+	/*FIXME*/
+
+	set_bit(PPC440SPE_DESC_WXOR, &op);
+
+	pg = alloc_page(GFP_KERNEL);
+	if (!pg)
+		return -ENOMEM;
+
+	spin_lock_bh(&chan->lock);
+	sw_desc = ppc440spe_adma_alloc_slots(chan, 1, 1);
+	if (sw_desc) {
+		/* 1 src, 1 dsr, int_ena, WXOR */
+		ppc440spe_desc_init_dma01pq(sw_desc, 1, 1, 1, op);
+		list_for_each_entry(iter, &sw_desc->group_list, chain_node) {
+			ppc440spe_desc_set_byte_count(iter, chan, PAGE_SIZE);
+			iter->unmap_len = PAGE_SIZE;
+		}
+	} else {
+		rval = -EFAULT;
+		spin_unlock_bh(&chan->lock);
+		goto exit;
+	}
+	spin_unlock_bh(&chan->lock);
+
+	/* Fill the test page with ones */
+	memset(page_address(pg), 0xFF, PAGE_SIZE);
+	dma_addr = dma_map_page(&chan->device->pdev->dev, pg, 0, PAGE_SIZE,
+	    DMA_BIDIRECTIONAL);
+
+	/* Setup addresses */
+	ppc440spe_adma_pq_set_src(sw_desc, dma_addr, 0);
+	ppc440spe_adma_pq_set_src_mult(sw_desc, 1, 0, 0);
+	addrs[0] = dma_addr;
+	addrs[1] = 0;
+	ppc440spe_adma_pq_set_dest(sw_desc, addrs);
+
+	async_tx_ack(&sw_desc->async_tx);
+	sw_desc->async_tx.callback = ppc440spe_test_callback;
+	sw_desc->async_tx.callback_param = NULL;
+
+	init_completion(&ppc440spe_r6_test_comp);
+
+	ppc440spe_adma_tx_submit(&sw_desc->async_tx);
+	ppc440spe_adma_issue_pending(&chan->common);
+
+	wait_for_completion(&ppc440spe_r6_test_comp);
+
+	/* Now check is the test page zeroed */
+	a = page_address(pg);
+	if ((*(u32*)a) == 0 && memcmp(a, a+4, PAGE_SIZE-4)==0) {
+		/* page is zero - RAID-6 enabled */
+		rval = 0;
+	} else {
+		/* RAID-6 was not enabled */
+		rval = -EINVAL;
+	}
+exit:
+	__free_page(pg);
+	return rval;
+}
+
+static struct platform_driver ppc440spe_adma_driver = {
+	.probe		= ppc440spe_adma_probe,
+	.remove		= ppc440spe_adma_remove,
+	.driver		= {
+		.owner	= THIS_MODULE,
+		.name	= "PPC440SP(E)-ADMA",
+	},
+};
+
+/**
+ * /proc interface
+ */
+static int ppc440spe_poly_read (char *page, char **start, off_t off,
+	int count, int *eof, void *data)
+{
+	char *p = page;
+	u32 reg;
+
+#ifdef CONFIG_440SP
+	/* 440SP has fixed polynomial */
+	reg = 0x4d;
+#else
+	reg = mfdcr(DCRN_MQ0_CFBHL);
+	reg >>= MQ0_CFBHL_POLY;
+	reg &= 0xFF;
+#endif
+
+	p += sprintf (p, "PPC440SP(e) RAID-6 driver uses 0x1%02x polynomial.\n",
+		reg);
+
+	return p - page;
+}
+
+static int ppc440spe_poly_write (struct file *file, const char __user *buffer,
+	unsigned long count, void *data)
+{
+	/* e.g., 0x14D or 0x11d */
+	char tmp[6];
+	unsigned long val, rval;
+
+#ifdef CONFIG_440SP
+	/* 440SP use default 0x14D polynomial only */
+	return -EINVAL;
+#endif
+
+	if (!count || count > 6)
+		return -EINVAL;
+
+	if (copy_from_user(tmp, buffer, count))
+		return -EFAULT;
+
+	tmp[count] = 0;
+	val = simple_strtoul(tmp, NULL, 16);
+
+	if (val & ~0x1FF)
+		return -EINVAL;
+
+	val &= 0xFF;
+	rval = mfdcr(DCRN_MQ0_CFBHL);
+	rval &= ~(0xFF << MQ0_CFBHL_POLY);
+	rval |= val << MQ0_CFBHL_POLY;
+	mtdcr(DCRN_MQ0_CFBHL, rval);
+
+	return count;
+}
+
+static int ppc440spe_r6ena_read (char *page, char **start, off_t off,
+	int count, int *eof, void *data)
+{
+	char *p = page;
+
+	p += sprintf(p, "%s\n",
+		ppc440spe_r6_enabled ?
+		"PPC440SP(e) RAID-6 capabilities are ENABLED.\n" :
+		"PPC440SP(e) RAID-6 capabilities are DISABLED.\n");
+
+	return p - page;
+}
+
+static int ppc440spe_r6ena_write (struct file *file, const char __user *buffer,
+	unsigned long count, void *data)
+{
+	/* e.g. 0xffffffff */
+	char tmp[11];
+	unsigned long val;
+
+	if (!count || count > 11)
+		return -EINVAL;
+
+	if (!ppc440spe_r6_tchan)
+		return -EFAULT;
+
+	if (copy_from_user(tmp, buffer, count))
+		return -EFAULT;
+
+	/* Write a key */
+	val = simple_strtoul(tmp, NULL, 16);
+	mtdcr(DCRN_MQ0_XORBA, val);
+	isync();
+
+	/* Verify does it really work now */
+	if (ppc440spe_test_raid6(ppc440spe_r6_tchan) == 0) {
+		/* PPC440SP(e) RAID-6 has been activated successfully */;
+		printk(KERN_INFO "PPC440SP(e) RAID-6 has been activated "
+		    "successfully\n");
+		ppc440spe_r6_enabled = 1;
+	} else {
+		/* PPC440SP(e) RAID-6 hasn't been activated! Error key ? */;
+		printk(KERN_INFO "PPC440SP(e) RAID-6 hasn't been activated!"
+		    " Error key ?\n");
+		ppc440spe_r6_enabled = 0;
+	}
+
+	return count;
+}
+
+static int ppc440spe_status_read (char *page, char **start, off_t off,
+	int count, int *eof, void *data)
+{
+	char *p = page;
+	int i;
+
+	for (i = 0; i < PPC440SPE_ADMA_ENGINES_NUM; i++) {
+		if (ppc_adma_devices[i] == -1)
+			continue;
+		p += sprintf(p, "PPC440SP(E)-ADMA.%d: %s\n", i,
+			       ppc_adma_errors[ppc_adma_devices[i]]);
+	}
+
+	return p - page;
+}
+
+static int __init ppc440spe_adma_init (void)
+{
+	int rval, i;
+	struct proc_dir_entry *p;
+
+	for (i = 0; i < PPC440SPE_ADMA_ENGINES_NUM; i++)
+		ppc_adma_devices[i] = -1;
+
+	rval = platform_driver_register(&ppc440spe_adma_driver);
+
+	if (rval == 0) {
+		/* Create /proc entries */
+		ppc440spe_proot = proc_mkdir(PPC440SPE_R6_PROC_ROOT, NULL);
+		if (!ppc440spe_proot) {
+			printk(KERN_ERR "%s: failed to create %s proc "
+			    "directory\n",__FUNCTION__,PPC440SPE_R6_PROC_ROOT);
+			/* User will not be able to enable h/w RAID-6 */
+			return rval;
+		}
+
+		/* GF polynome to use */
+		p = create_proc_entry("poly", 0, ppc440spe_proot);
+		if (p) {
+			p->read_proc = ppc440spe_poly_read;
+			p->write_proc = ppc440spe_poly_write;
+		}
+
+		/* RAID-6 h/w enable entry */
+		p = create_proc_entry("enable", 0, ppc440spe_proot);
+		if (p) {
+			p->read_proc = ppc440spe_r6ena_read;
+			p->write_proc = ppc440spe_r6ena_write;
+		}
+
+		/* initialization status */
+		p = create_proc_entry("devices", 0, ppc440spe_proot);
+		if (p) {
+			p->read_proc = ppc440spe_status_read;
+		}
+	}
+	return rval;
+}
+
+#if 0
+static void __exit ppc440spe_adma_exit (void)
+{
+	platform_driver_unregister(&ppc440spe_adma_driver);
+	return;
+}
+module_exit(ppc440spe_adma_exit);
+#endif
+
+module_init(ppc440spe_adma_init);
+
+MODULE_AUTHOR("Yuri Tikhonov <yur at emcraft.com>");
+MODULE_DESCRIPTION("PPC440SPE ADMA Engine Driver");
+MODULE_LICENSE("GPL");
-- 
1.5.6.1




More information about the Linuxppc-dev mailing list