[PATCH] powerpc/powermac: Add missing of_node_put

[Nicolas Palix]

Hi Stephen,

I fix the patch. I also change the "vias == 0" in "vias == NULL".
Is "!vias" better ?

On Wednesday 03 December 2008 00:25:08 Stephen Rothwell wrote:
> Hi Nicolas,
> 
> On Wed, 3 Dec 2008 10:19:01 +1100 Stephen Rothwell <sfr at canb.auug.org.au> wrote:
> >
> > I think this particular patch is also required against Linus' kernel (not
> > just linux-next).
> 
> In fact, I think all these patches can apply to Linus' current tree.
> 
Signed-off-by: Nicolas Palix <npalix at diku.dk>
Signed-off-by: Julia Lawall <julia at diku.dk>
---
 arch/powerpc/platforms/powermac/pci.c  |    2 +
 arch/powerpc/platforms/powermac/time.c |   11 ++++++----
 2 files changed, 9 insertions(+), 4 deletions(-)

diff --git a/arch/powerpc/platforms/powermac/pci.c b/arch/powerpc/platforms/powermac/pci.c
index bcf50d7..800fcce 100644
--- a/arch/powerpc/platforms/powermac/pci.c
+++ b/arch/powerpc/platforms/powermac/pci.c
@@ -661,6 +661,7 @@ static void __init init_second_ohare(void)
 			pci_find_hose_for_OF_device(np);
 		if (!hose) {
 			printk(KERN_ERR "Can't find PCI hose for OHare2 !\n");
+			of_node_put(np);
 			return;
 		}
 		early_read_config_word(hose, bus, devfn, PCI_COMMAND, &cmd);
@@ -669,6 +670,7 @@ static void __init init_second_ohare(void)
 		early_write_config_word(hose, bus, devfn, PCI_COMMAND, cmd);
 	}
 	has_second_ohare = 1;
+	of_node_put(np);
 }
 
 /*
diff --git a/arch/powerpc/platforms/powermac/time.c b/arch/powerpc/platforms/powermac/time.c
index 59eb840..1810e42 100644
--- a/arch/powerpc/platforms/powermac/time.c
+++ b/arch/powerpc/platforms/powermac/time.c
@@ -265,12 +265,15 @@ int __init via_calibrate_decr(void)
 	struct resource rsrc;
 
 	vias = of_find_node_by_name(NULL, "via-cuda");
-	if (vias == 0)
+	if (vias == NULL)
 		vias = of_find_node_by_name(NULL, "via-pmu");
-	if (vias == 0)
+	if (vias == NULL)
 		vias = of_find_node_by_name(NULL, "via");
-	if (vias == 0 || of_address_to_resource(vias, 0, &rsrc))
+	if (vias == NULL || of_address_to_resource(vias, 0, &rsrc)) {
+	        of_node_put(vias);
 		return 0;
+	}
+	of_node_put(vias);
 	via = ioremap(rsrc.start, rsrc.end - rsrc.start + 1);
 	if (via == NULL) {
 		printk(KERN_ERR "Failed to map VIA for timer calibration !\n");
@@ -297,7 +300,7 @@ int __init via_calibrate_decr(void)
 	ppc_tb_freq = (dstart - dend) * 100 / 6;
 
 	iounmap(via);
-	
+
 	return 1;
 }
 #endif
-- 
Nicolas Palix