[RFC 2/2] powerpc: copy_4K_page tweaked for Cell - add CPU feature

[Michael Ellerman]

On Thu, 2008-08-14 at 21:48 +1000, Mark Nelson wrote:
> Hi Michael,
> 
> On Thu, 14 Aug 2008 08:51:35 pm Michael Ellerman wrote:
> > On Thu, 2008-08-14 at 16:18 +1000, Mark Nelson wrote:
> > > Add a new CPU feature, CPU_FTR_CP_USE_DCBTZ, to be added to the CPUs that benefit
> > > from having dcbt and dcbz instructions used in copy_4K_page(). So far Cell, PPC970
> > > and Power4 benefit.
> > > 
> > > This way all the other 64bit powerpc chips will have the whole prefetching loop
> > > nop'ed out.
> > 
> > > Index: upstream/arch/powerpc/lib/copypage_64.S
> > > ===================================================================
> > > --- upstream.orig/arch/powerpc/lib/copypage_64.S
> > > +++ upstream/arch/powerpc/lib/copypage_64.S
> > > @@ -18,6 +18,7 @@ PPC64_CACHES:
> > >  
> > >  _GLOBAL(copy_4K_page)
> > >  	li	r5,4096		/* 4K page size */
> > > +BEGIN_FTR_SECTION
> > >  	ld      r10,PPC64_CACHES at toc(r2)
> > >  	lwz	r11,DCACHEL1LOGLINESIZE(r10)	/* log2 of cache line size */
> > >  	lwz     r12,DCACHEL1LINESIZE(r10)	/* Get cache line size */
> > > @@ -30,7 +31,7 @@ setup:
> > >  	dcbz	r9,r3
> > >  	add	r9,r9,r12
> > >  	bdnz	setup
> > > -
> > > +END_FTR_SECTION_IFSET(CPU_FTR_CP_USE_DCBTZ)
> > >  	addi	r3,r3,-8
> > >  	srdi    r8,r5,7		/* page is copied in 128 byte strides */
> > >  	addi	r8,r8,-1	/* one stride copied outside loop */
> > 
> > Instead of nop'ing it out, we could use an alternative feature section
> > to either run it or jump over it. It would look something like:
> > 
> > 
> > _GLOBAL(copy_4K_page)
> > BEGIN_FTR_SECTION
> >         li      r5,4096         /* 4K page size */
> >         ld      r10,PPC64_CACHES at toc(r2)
> >         lwz     r11,DCACHEL1LOGLINESIZE(r10)    /* log2 of cache line size */
> >         lwz     r12,DCACHEL1LINESIZE(r10)       /* Get cache line size */
> >         li      r9,0
> >         srd     r8,r5,r11
> > 
> >         mtctr   r8
> > setup:
> >         dcbt    r9,r4
> >         dcbz    r9,r3
> >         add     r9,r9,r12
> >         bdnz    setup
> > FTR_SECTION_ELSE
> > 	b	1f
> > ALT_FTR_SECTION_END_IFSET(CPU_FTR_CP_USE_DCBTZ)
> > 1:
> >         addi    r3,r3,-8
> > 
> > So in the no-dcbtz case you'd get a branch instead of 11 nops.
> > 
> > Of course you'd need to benchmark it to see if skipping the nops is
> > better than executing them ;P
> 
> Thanks for looking through this.
> 
> That does look a lot better. In the first version there wasn't quite
> as much to nop out (the cache line size was hardcoded to 128
> bytes) so I wasn't so worried but I'll definitely try this with an
> alternative section like you describe.
> 
> The jump probably will turn out to be better because I'd imagine
> that the same chips that don't need the dcbt and dcbz because
> they've got beefy enough hardware prefetchers also won't be
> disturbed by the jump (but benchmarks tomorrow will confirm;
> or prove me wrong :) )

Yeah, that would make sense. But you never know :)

cheers

-- 
Michael Ellerman
OzLabs, IBM Australia Development Lab

wwweb: http://michael.ellerman.id.au
phone: +61 2 6212 1183 (tie line 70 21183)

We do not inherit the earth from our ancestors,
we borrow it from our children. - S.M.A.R.T Person
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 189 bytes
Desc: This is a digitally signed message part
URL: <http://lists.ozlabs.org/pipermail/linuxppc-dev/attachments/20080814/4912b602/attachment.pgp>