[PATCH] pata_of_platform: fix no irq handling

[Stefan Roese]

On Tuesday 12 August 2008, Anton Vorontsov wrote:
> > > Another possibility is that you got the wrong interrupt number
> > > in the device-tree...
> > >
> > > Ben.
> >
> > The platform is the AMCC Sequoia board.  We've built a little adapter to
> > connect a compact flash card to the processor bus.  I believe the
> > interrupt selection in the device tree is correct, and I've checked over
> > the u-boot settings for the IRQ line (active high, level sensitive).
>
> IDE IRQs are active-low.

IIRC, the CompactFlash interrupt is active-high.

Best regards,
Stefan