hang w/ppc6xx_defconfig related to 'simple-bus' compatible
John Linn
John.Linn at xilinx.com
Thu Aug 7 05:03:45 EST 2008
I was thinking it's CONFIG_PPC_UDBG_16550.
-- John
> -----Original Message-----
> From: linuxppc-dev-bounces+john.linn=xilinx.com at ozlabs.org
[mailto:linuxppc-dev-
> bounces+john.linn=xilinx.com at ozlabs.org] On Behalf Of Kumar Gala
> Sent: Wednesday, August 06, 2008 12:39 PM
> To: Stephen Neuendorffer
> Cc: Scott Wood; ppc-dev list
> Subject: Re: hang w/ppc6xx_defconfig related to 'simple-bus'
compatible
>
> Do you know what the CONFIG_ option is called for the legacy driver.
>
> - k
>
> On Aug 6, 2008, at 1:02 PM, Stephen Neuendorffer wrote:
>
> >
> > The problem (in my case) is that the legacy-serial driver doesn't
> > accept
> > all of the 16550 configurations accepted by the regular ns16550
> > driver.
> > The problem is not related to simple-bus, but only became visible
when
> > simple-bus bindings are used because the legacy-serial driver
> > specifically looks for an ns16550 node contained by a simple-bus.
> >
> > Most likely the hpcn_defconfig disables the legacy-serial driver
> > altogether.
> >
> > Steve
> >
> >> -----Original Message-----
> >> From:
linuxppc-dev-bounces+stephen.neuendorffer=xilinx.com at ozlabs.org
> > [mailto:linuxppc-dev-
> >> bounces+stephen.neuendorffer=xilinx.com at ozlabs.org] On Behalf Of
> >> Scott
> > Wood
> >> Sent: Wednesday, August 06, 2008 10:36 AM
> >> To: grant.likely at secretlab.ca
> >> Cc: ppc-dev list
> >> Subject: Re: hang w/ppc6xx_defconfig related to 'simple-bus'
> > compatible
> >>
> >> On Wed, Aug 06, 2008 at 07:41:28AM -0600, Grant Likely wrote:
> >>> On Tue, Aug 05, 2008 at 08:21:31AM -0500, Kumar Gala wrote:
> >>>> I'm trying to get the ppc6xx_defconfig booting on any 8641
> > (74xx/e600)
> >>>> system. If I remove the 'simple-bus' compatible from the soc
node
> > in
> >>>> the .dts it works. Otherwise it hangs at but and looks to be
> > crashed in
> >>>> the serial driver due to accessing memory at 0.
> >>>>
> >>>> I've tried the same .dts (w/'simple-bus') using the
> >>>> mpc8641_hpcn_defconfig and things work.
> >>>
> >>> The Xilinx folks hit something similar. ns16550 nodes get matched
> > if
> >>> the parent claims simple-bus. If extra stuff needs to be done to
> > use
> >>> that port, then bad things happen.
> >>
> >> If extra stuff needs to be done, it shouldn't claim to be a
> > simple-bus.
> >>
> >> -Scott
> >> _______________________________________________
> >> Linuxppc-dev mailing list
> >> Linuxppc-dev at ozlabs.org
> >> https://ozlabs.org/mailman/listinfo/linuxppc-dev
> >
> >
> > This email and any attachments are intended for the sole use of the
> > named recipient(s) and contain(s) confidential information that may
> > be proprietary, privileged or copyrighted under applicable law. If
> > you are not the intended recipient, do not read, copy, or forward
> > this email message or any attachments. Delete this email message and
> > any attachments immediately.
> >
> >
> > _______________________________________________
> > Linuxppc-dev mailing list
> > Linuxppc-dev at ozlabs.org
> > https://ozlabs.org/mailman/listinfo/linuxppc-dev
>
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev at ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-dev
This email and any attachments are intended for the sole use of the named recipient(s) and contain(s) confidential information that may be proprietary, privileged or copyrighted under applicable law. If you are not the intended recipient, do not read, copy, or forward this email message or any attachments. Delete this email message and any attachments immediately.
More information about the Linuxppc-dev
mailing list