[PATCH 4/7] Celleb: New HTAB Guest OS Interface on Beat
Ishizaki Kou
kou.ishizaki at toshiba.co.jp
Thu Sep 27 17:53:26 EST 2007
This is a patch kit to work with new Guest OS Interface
to tweak HTAB on Beat. It detects old and new Guest OS Interfaces
automatically.
Signed-off-by: Kou Ishizaki <Kou.Ishizaki at toshiba.co.jp>
---
Index: linux-powerpc-git/arch/powerpc/platforms/celleb/setup.c
===================================================================
--- linux-powerpc-git.orig/arch/powerpc/platforms/celleb/setup.c
+++ linux-powerpc-git/arch/powerpc/platforms/celleb/setup.c
@@ -119,7 +119,7 @@ static int __init celleb_probe(void)
return 0;
powerpc_firmware_features |= FW_FEATURE_CELLEB_POSSIBLE;
- hpte_init_beat();
+ hpte_init_beat_v3();
return 1;
}
Index: linux-powerpc-git/include/asm-powerpc/mmu-hash64.h
===================================================================
--- linux-powerpc-git.orig/include/asm-powerpc/mmu-hash64.h
+++ linux-powerpc-git/include/asm-powerpc/mmu-hash64.h
@@ -256,6 +256,7 @@ extern void hpte_init_native(void);
extern void hpte_init_lpar(void);
extern void hpte_init_iSeries(void);
extern void hpte_init_beat(void);
+extern void hpte_init_beat_v3(void);
extern void stabs_alloc(void);
extern void slb_initialize(void);
Index: linux-powerpc-git/arch/powerpc/platforms/celleb/beat_syscall.h
===================================================================
--- linux-powerpc-git.orig/arch/powerpc/platforms/celleb/beat_syscall.h
+++ linux-powerpc-git/arch/powerpc/platforms/celleb/beat_syscall.h
@@ -157,4 +157,8 @@
#define HV_rtc_write __BEAT_ADD_VENDOR_ID(0x191, 1)
#define HV_eeprom_read __BEAT_ADD_VENDOR_ID(0x192, 1)
#define HV_eeprom_write __BEAT_ADD_VENDOR_ID(0x193, 1)
+#define HV_insert_htab_entry3 __BEAT_ADD_VENDOR_ID(0x104, 1)
+#define HV_invalidate_htab_entry3 __BEAT_ADD_VENDOR_ID(0x105, 1)
+#define HV_update_htab_permission3 __BEAT_ADD_VENDOR_ID(0x106, 1)
+#define HV_clear_htab3 __BEAT_ADD_VENDOR_ID(0x107, 1)
#endif
Index: linux-powerpc-git/arch/powerpc/platforms/celleb/beat_wrapper.h
===================================================================
--- linux-powerpc-git.orig/arch/powerpc/platforms/celleb/beat_wrapper.h
+++ linux-powerpc-git/arch/powerpc/platforms/celleb/beat_wrapper.h
@@ -98,6 +98,37 @@ static inline s64 beat_write_htab_entry(
return ret;
}
+static inline s64 beat_insert_htab_entry3(u64 htab_id, u64 group,
+ u64 hpte_v, u64 hpte_r, u64 mask_v, u64 value_v, u64 *slot)
+{
+ u64 dummy[1];
+ s64 ret;
+
+ ret = beat_hcall1(HV_insert_htab_entry3, dummy, htab_id, group,
+ hpte_v, hpte_r, mask_v, value_v);
+ *slot = dummy[0];
+ return ret;
+}
+
+static inline s64 beat_invalidate_htab_entry3(u64 htab_id, u64 group,
+ u64 va, u64 pss)
+{
+ return beat_hcall_norets(HV_invalidate_htab_entry3,
+ htab_id, group, va, pss);
+}
+
+static inline s64 beat_update_htab_permission3(u64 htab_id, u64 group,
+ u64 va, u64 pss, u64 ptel_mask, u64 ptel_value)
+{
+ return beat_hcall_norets(HV_update_htab_permission3,
+ htab_id, group, va, pss, ptel_mask, ptel_value);
+}
+
+static inline s64 beat_clear_htab3(u64 htab_id)
+{
+ return beat_hcall_norets(HV_clear_htab3, htab_id);
+}
+
static inline void beat_shutdown_logical_partition(u64 code)
{
(void)beat_hcall_norets(HV_shutdown_logical_partition, code);
@@ -217,4 +248,41 @@ static inline s64 beat_put_iopte(u64 ioa
ioid, flags);
}
+static inline s64 beat_construct_event_receive_port(u64 *port)
+{
+ u64 dummy[1];
+ s64 ret;
+
+ ret = beat_hcall1(HV_construct_event_receive_port, dummy);
+ *port = dummy[0];
+ return ret;
+}
+
+static inline s64 beat_destruct_event_receive_port(u64 port)
+{
+ s64 ret;
+
+ ret = beat_hcall_norets(HV_destruct_event_receive_port, port);
+ return ret;
+}
+
+static inline s64 beat_create_repository_node(u64 path[4], u64 data[2])
+{
+ s64 ret;
+
+ ret = beat_hcall_norets(HV_create_repository_node2,
+ path[0], path[1], path[2], path[3], data[0], data[1]);
+ return ret;
+}
+
+static inline s64 beat_get_repository_node_value(u64 lpid, u64 path[4],
+ u64 data[2])
+{
+ s64 ret;
+
+ ret = beat_hcall2(HV_get_repository_node_value2, data,
+ lpid, path[0], path[1], path[2], path[3]);
+ return ret;
+}
+
#endif
Index: linux-powerpc-git/arch/powerpc/platforms/celleb/htab.c
===================================================================
--- linux-powerpc-git.orig/arch/powerpc/platforms/celleb/htab.c
+++ linux-powerpc-git/arch/powerpc/platforms/celleb/htab.c
@@ -306,3 +306,133 @@ void __init hpte_init_beat(void)
ppc_md.hpte_remove = beat_lpar_hpte_remove;
ppc_md.hpte_clear_all = beat_lpar_hptab_clear;
}
+
+static long beat_lpar_hpte_insert_v3(unsigned long hpte_group,
+ unsigned long va, unsigned long pa,
+ unsigned long rflags, unsigned long vflags,
+ int psize)
+{
+ unsigned long lpar_rc;
+ unsigned long slot;
+ unsigned long hpte_v, hpte_r;
+
+ /* same as iseries */
+ if (vflags & HPTE_V_SECONDARY)
+ return -1;
+
+ if (!(vflags & HPTE_V_BOLTED))
+ DBG_LOW("hpte_insert(group=%lx, va=%016lx, pa=%016lx, "
+ "rflags=%lx, vflags=%lx, psize=%d)\n",
+ hpte_group, va, pa, rflags, vflags, psize);
+
+ hpte_v = hpte_encode_v(va, psize) | vflags | HPTE_V_VALID;
+ hpte_r = hpte_encode_r(pa, psize) | rflags;
+
+ if (!(vflags & HPTE_V_BOLTED))
+ DBG_LOW(" hpte_v=%016lx, hpte_r=%016lx\n", hpte_v, hpte_r);
+
+ if (rflags & (_PAGE_GUARDED|_PAGE_NO_CACHE))
+ hpte_r &= ~_PAGE_COHERENT;
+
+ /* insert into not-volted entry */
+ lpar_rc = beat_insert_htab_entry3(0, hpte_group, hpte_v, hpte_r,
+ HPTE_V_BOLTED, 0, &slot);
+ /*
+ * Since we try and ioremap PHBs we don't own, the pte insert
+ * will fail. However we must catch the failure in hash_page
+ * or we will loop forever, so return -2 in this case.
+ */
+ if (unlikely(lpar_rc != 0)) {
+ if (!(vflags & HPTE_V_BOLTED))
+ DBG_LOW(" lpar err %lx\n", lpar_rc);
+ return -2;
+ }
+ if (!(vflags & HPTE_V_BOLTED))
+ DBG_LOW(" -> slot: %lx\n", slot);
+
+ /* We have to pass down the secondary bucket bit here as well */
+ return (slot ^ hpte_group) & 15;
+}
+
+/*
+ * NOTE: for updatepp ops we are fortunate that the linux "newpp" bits and
+ * the low 3 bits of flags happen to line up. So no transform is needed.
+ * We can probably optimize here and assume the high bits of newpp are
+ * already zero. For now I am paranoid.
+ */
+static long beat_lpar_hpte_updatepp_v3(unsigned long slot,
+ unsigned long newpp,
+ unsigned long va,
+ int psize, int local)
+{
+ unsigned long lpar_rc;
+ unsigned long want_v;
+ unsigned long pss;
+
+ want_v = hpte_encode_v(va, psize);
+ pss = (psize == MMU_PAGE_4K) ? -1UL : mmu_psize_defs[psize].penc;
+
+ DBG_LOW(" update: "
+ "avpnv=%016lx, slot=%016lx, psize: %d, newpp %016lx ... ",
+ want_v & HPTE_V_AVPN, slot, psize, newpp);
+
+ lpar_rc = beat_update_htab_permission3(0, slot, want_v, pss, 7, newpp);
+
+ if (lpar_rc == 0xfffffff7) {
+ DBG_LOW("not found !\n");
+ return -1;
+ }
+
+ DBG_LOW("ok\n");
+
+ BUG_ON(lpar_rc != 0);
+
+ return 0;
+}
+
+static void beat_lpar_hpte_invalidate_v3(unsigned long slot, unsigned long va,
+ int psize, int local)
+{
+ unsigned long want_v;
+ unsigned long lpar_rc;
+ unsigned long pss;
+
+ DBG_LOW(" inval : slot=%lx, va=%016lx, psize: %d, local: %d\n",
+ slot, va, psize, local);
+ want_v = hpte_encode_v(va, psize);
+ pss = (psize == MMU_PAGE_4K) ? -1UL : mmu_psize_defs[psize].penc;
+
+ lpar_rc = beat_invalidate_htab_entry3(0, slot, want_v, pss);
+
+ /* E_busy can be valid output: page may be already replaced */
+ BUG_ON(lpar_rc != 0 && lpar_rc != 0xfffffff7);
+}
+
+static int64_t _beat_lpar_hptab_clear_v3(void)
+{
+ return beat_clear_htab3(0);
+}
+
+static void beat_lpar_hptab_clear_v3(void)
+{
+ _beat_lpar_hptab_clear_v3();
+}
+
+void __init hpte_init_beat_v3(void)
+{
+ if (_beat_lpar_hptab_clear_v3() == 0) {
+ ppc_md.hpte_invalidate = beat_lpar_hpte_invalidate_v3;
+ ppc_md.hpte_updatepp = beat_lpar_hpte_updatepp_v3;
+ ppc_md.hpte_updateboltedpp = beat_lpar_hpte_updateboltedpp;
+ ppc_md.hpte_insert = beat_lpar_hpte_insert_v3;
+ ppc_md.hpte_remove = beat_lpar_hpte_remove;
+ ppc_md.hpte_clear_all = beat_lpar_hptab_clear_v3;
+ } else {
+ ppc_md.hpte_invalidate = beat_lpar_hpte_invalidate;
+ ppc_md.hpte_updatepp = beat_lpar_hpte_updatepp;
+ ppc_md.hpte_updateboltedpp = beat_lpar_hpte_updateboltedpp;
+ ppc_md.hpte_insert = beat_lpar_hpte_insert;
+ ppc_md.hpte_remove = beat_lpar_hpte_remove;
+ ppc_md.hpte_clear_all = beat_lpar_hptab_clear;
+ }
+}
More information about the Linuxppc-dev
mailing list