[PATCH] qe: miscellaneous code improvements and fixes to the QE library
Timur Tabi
timur at freescale.com
Thu Sep 20 02:38:32 EST 2007
This patch makes numerous miscellaneous code improvements to the QE library.
1. Remove struct ucc_common and merge ucc_init_guemr() into ucc_set_type()
(every caller of ucc_init_guemr() also calls ucc_set_type()). Modify all
callers of ucc_set_type() accordingly.
2. Remove the unused enum ucc_pram_initial_offset.
3. Refactor qe_setbrg(), also implement work-around for errata QE_General4.
4. Several printk() calls were missing the terminating \n.
5. Add __iomem where needed.
6. In ucc_slow_init() the RBASE and TBASE registers in the PRAM were programmed
with the wrong value.
7. Add the protocol type to struct us_info and updated ucc_slow_init() to
use it, instead of always programming QE_CR_PROTOCOL_UNSPECIFIED.
8. Rename ucc_slow_restart_x() to ucc_slow_restart_tx()
9. Add several macros in qe.h (mostly for slow UCC support, but also to
standardize some naming convention) and remove several unused macros.
10. Update ucc_geth.c to use the new macros.
11. Add ucc_slow_info.protocol to specify which QE_CR_PROTOCOL_xxx protcol
to use when initializing the UCC in ucc_slow_init().
12. Rename ucc_slow_pram.rfcr to rbmr and ucc_slow_pram.tfcr to tbmr, since
these are the real names of the registers.
Signed-off-by: Timur Tabi <timur at freescale.com>
---
This patch applies on top of Anton Vorontsov's patch "ucc_geth: fix compilation",
which has been applied to the netdev tree, but not the powerpc tree.
arch/powerpc/sysdev/qe_lib/qe.c | 35 ++++--
arch/powerpc/sysdev/qe_lib/qe_ic.c | 2 -
arch/powerpc/sysdev/qe_lib/qe_io.c | 35 ++---
arch/powerpc/sysdev/qe_lib/ucc.c | 68 ++++++----
arch/powerpc/sysdev/qe_lib/ucc_fast.c | 127 ++++++++---------
arch/powerpc/sysdev/qe_lib/ucc_slow.c | 48 +++----
drivers/net/ucc_geth.c | 2 +-
include/asm-powerpc/immap_qe.h | 23 +--
include/asm-powerpc/qe.h | 243 +++++++++++++++++++++++----------
include/asm-powerpc/ucc.h | 24 +---
include/asm-powerpc/ucc_slow.h | 9 +-
11 files changed, 346 insertions(+), 270 deletions(-)
diff --git a/arch/powerpc/sysdev/qe_lib/qe.c b/arch/powerpc/sysdev/qe_lib/qe.c
index 90f8740..3220c28 100644
--- a/arch/powerpc/sysdev/qe_lib/qe.c
+++ b/arch/powerpc/sysdev/qe_lib/qe.c
@@ -141,7 +141,7 @@ EXPORT_SYMBOL(qe_issue_cmd);
* 16 BRGs, which can be connected to the QE channels or output
* as clocks. The BRGs are in two different block of internal
* memory mapped space.
- * The baud rate clock is the system clock divided by something.
+ * The BRG clock is the QE clock divided by 2.
* It was set up long ago during the initial boot phase and is
* is given to us.
* Baud rate clocks are zero-based in the driver code (as that maps
@@ -165,26 +165,39 @@ unsigned int get_brg_clk(void)
return brg_clk;
}
-/* This function is used by UARTS, or anything else that uses a 16x
- * oversampled clock.
+/* Program the BRG to the given sampling rate and multiplier
+ *
+ * @brg: the BRG, 1-16
+ * @rate: the desired sampling rate
+ * @multiplier: corresponds to the value programmed in GUMR_L[RDCR] or
+ * GUMR_L[TDCR]. E.g., if this BRG is the RX clock, and GUMR_L[RDCR]=01,
+ * then 'multiplier' should be 8.
+ *
+ * Also note that the value programmed into the BRGC register must be even.
*/
-void qe_setbrg(u32 brg, u32 rate)
+void qe_setbrg(unsigned int brg, unsigned int rate, unsigned int multiplier)
{
volatile u32 *bp;
u32 divisor, tempval;
- int div16 = 0;
+ u32 div16 = 0;
- bp = &qe_immr->brg.brgc[brg];
+ bp = &qe_immr->brg.brgc[brg - 1];
+
+ divisor = get_brg_clk() / (rate * multiplier);
- divisor = (get_brg_clk() / rate);
if (divisor > QE_BRGC_DIVISOR_MAX + 1) {
- div16 = 1;
+ div16 = QE_BRGC_DIV16;
divisor /= 16;
}
- tempval = ((divisor - 1) << QE_BRGC_DIVISOR_SHIFT) | QE_BRGC_ENABLE;
- if (div16)
- tempval |= QE_BRGC_DIV16;
+ /* Errata QE_General4, which affects some MPC832x and MPC836x SOCs, says
+ that the BRG divisor must be even if you're not using divide-by-16
+ mode. */
+ if (!div16 && (divisor & 1))
+ divisor++;
+
+ tempval = ((divisor - 1) << QE_BRGC_DIVISOR_SHIFT) |
+ QE_BRGC_ENABLE | div16;
out_be32(bp, tempval);
}
diff --git a/arch/powerpc/sysdev/qe_lib/qe_ic.c b/arch/powerpc/sysdev/qe_lib/qe_ic.c
index 55e6f39..9a2d1ed 100644
--- a/arch/powerpc/sysdev/qe_lib/qe_ic.c
+++ b/arch/powerpc/sysdev/qe_lib/qe_ic.c
@@ -405,8 +405,6 @@ void __init qe_ic_init(struct device_node *node, unsigned int flags)
set_irq_data(qe_ic->virq_high, qe_ic);
set_irq_chained_handler(qe_ic->virq_high, qe_ic_cascade_high);
}
-
- printk("QEIC (%d IRQ sources) at %p\n", NR_QE_IC_INTS, qe_ic->regs);
}
void qe_ic_set_highest_priority(unsigned int virq, int high)
diff --git a/arch/powerpc/sysdev/qe_lib/qe_io.c b/arch/powerpc/sysdev/qe_lib/qe_io.c
index e32b45b..a114cb0 100644
--- a/arch/powerpc/sysdev/qe_lib/qe_io.c
+++ b/arch/powerpc/sysdev/qe_lib/qe_io.c
@@ -195,29 +195,22 @@ EXPORT_SYMBOL(par_io_of_config);
#ifdef DEBUG
static void dump_par_io(void)
{
- int i;
+ unsigned int i;
- printk(KERN_INFO "PAR IO registars:\n");
- printk(KERN_INFO "Base address: 0x%08x\n", (u32) par_io);
+ printk(KERN_INFO "%s: par_io=%p\n", __FUNCTION__, par_io);
for (i = 0; i < num_par_io_ports; i++) {
- printk(KERN_INFO "cpodr[%d] : addr - 0x%08x, val - 0x%08x\n",
- i, (u32) & par_io[i].cpodr,
- in_be32(&par_io[i].cpodr));
- printk(KERN_INFO "cpdata[%d]: addr - 0x%08x, val - 0x%08x\n",
- i, (u32) & par_io[i].cpdata,
- in_be32(&par_io[i].cpdata));
- printk(KERN_INFO "cpdir1[%d]: addr - 0x%08x, val - 0x%08x\n",
- i, (u32) & par_io[i].cpdir1,
- in_be32(&par_io[i].cpdir1));
- printk(KERN_INFO "cpdir2[%d]: addr - 0x%08x, val - 0x%08x\n",
- i, (u32) & par_io[i].cpdir2,
- in_be32(&par_io[i].cpdir2));
- printk(KERN_INFO "cppar1[%d]: addr - 0x%08x, val - 0x%08x\n",
- i, (u32) & par_io[i].cppar1,
- in_be32(&par_io[i].cppar1));
- printk(KERN_INFO "cppar2[%d]: addr - 0x%08x, val - 0x%08x\n",
- i, (u32) & par_io[i].cppar2,
- in_be32(&par_io[i].cppar2));
+ printk(KERN_INFO " cpodr[%u]=%08x\n", i,
+ in_be32(&par_io[i].cpodr));
+ printk(KERN_INFO " cpdata[%u]=%08x\n", i,
+ in_be32(&par_io[i].cpdata));
+ printk(KERN_INFO " cpdir1[%u]=%08x\n", i,
+ in_be32(&par_io[i].cpdir1));
+ printk(KERN_INFO " cpdir2[%u]=%08x\n", i,
+ in_be32(&par_io[i].cpdir2));
+ printk(KERN_INFO " cppar1[%u]=%08x\n", i,
+ in_be32(&par_io[i].cppar1));
+ printk(KERN_INFO " cppar2[%u]=%08x\n", i,
+ in_be32(&par_io[i].cppar2));
}
}
diff --git a/arch/powerpc/sysdev/qe_lib/ucc.c b/arch/powerpc/sysdev/qe_lib/ucc.c
index f970e54..517cc95 100644
--- a/arch/powerpc/sysdev/qe_lib/ucc.c
+++ b/arch/powerpc/sysdev/qe_lib/ucc.c
@@ -43,43 +43,57 @@ int ucc_set_qe_mux_mii_mng(int ucc_num)
}
EXPORT_SYMBOL(ucc_set_qe_mux_mii_mng);
-int ucc_set_type(int ucc_num, struct ucc_common *regs,
- enum ucc_speed_type speed)
+/* Configure the UCC to either Slow or Fast.
+ *
+ * A given UCC can be figured to support either "slow" devices (e.g. UART)
+ * or "fast" devices (e.g. Ethernet).
+ *
+ * 'ucc_num' is the UCC number, from 0 - 7.
+ *
+ * This function also sets the UCC_GUEMR_SET_RESERVED3 bit because that bit
+ * must always be set to 1.
+ */
+int ucc_set_type(unsigned int ucc_num, enum ucc_speed_type speed)
{
- u8 guemr = 0;
+ u8 __iomem *p_guemr;
+ u8 mode; /* The GUEMR register mode bits */
- /* check if the UCC number is in range. */
- if ((ucc_num > UCC_MAX_NUM - 1) || (ucc_num < 0))
+ /* The GUEMR register is at the same location for both slow and fast
+ devices, so we just use uccX.slow.guemr. */
+ switch (ucc_num) {
+ case 0: p_guemr = &qe_immr->ucc1.slow.guemr;
+ break;
+ case 1: p_guemr = &qe_immr->ucc2.slow.guemr;
+ break;
+ case 2: p_guemr = &qe_immr->ucc3.slow.guemr;
+ break;
+ case 3: p_guemr = &qe_immr->ucc4.slow.guemr;
+ break;
+ case 4: p_guemr = &qe_immr->ucc5.slow.guemr;
+ break;
+ case 5: p_guemr = &qe_immr->ucc6.slow.guemr;
+ break;
+ case 6: p_guemr = &qe_immr->ucc7.slow.guemr;
+ break;
+ case 7: p_guemr = &qe_immr->ucc8.slow.guemr;
+ break;
+ default:
return -EINVAL;
+ }
- guemr = regs->guemr;
- guemr &= ~(UCC_GUEMR_MODE_MASK_RX | UCC_GUEMR_MODE_MASK_TX);
switch (speed) {
case UCC_SPEED_TYPE_SLOW:
- guemr |= (UCC_GUEMR_MODE_SLOW_RX | UCC_GUEMR_MODE_SLOW_TX);
+ mode = UCC_GUEMR_MODE_SLOW_RX | UCC_GUEMR_MODE_SLOW_TX;
break;
case UCC_SPEED_TYPE_FAST:
- guemr |= (UCC_GUEMR_MODE_FAST_RX | UCC_GUEMR_MODE_FAST_TX);
+ mode = UCC_GUEMR_MODE_FAST_RX | UCC_GUEMR_MODE_FAST_TX;
break;
default:
return -EINVAL;
}
- regs->guemr = guemr;
- return 0;
-}
-
-int ucc_init_guemr(struct ucc_common *regs)
-{
- u8 guemr = 0;
-
- if (!regs)
- return -EINVAL;
-
- /* Set bit 3 (which is reserved in the GUEMR register) to 1 */
- guemr = UCC_GUEMR_SET_RESERVED3;
-
- regs->guemr = guemr;
+ out_8(p_guemr, (in_8(p_guemr) & ~UCC_GUEMR_MODE_MASK) |
+ UCC_GUEMR_SET_RESERVED3 | mode);
return 0;
}
@@ -160,7 +174,7 @@ int ucc_set_qe_mux_rxtx(int ucc_num, enum qe_clock clock, enum comm_dir mode)
if (!((mode == COMM_DIR_RX) || (mode == COMM_DIR_TX))) {
printk(KERN_ERR
- "ucc_set_qe_mux_rxtx: bad comm mode type passed.");
+ "ucc_set_qe_mux_rxtx: bad comm mode type passed.\n");
return -EINVAL;
}
@@ -235,8 +249,8 @@ int ucc_set_qe_mux_rxtx(int ucc_num, enum qe_clock clock, enum comm_dir mode)
}
if (source == -1) {
- printk(KERN_ERR
- "ucc_set_qe_mux_rxtx: Bad combination of clock and UCC.");
+ printk(KERN_ERR "%s: Bad combination of clock and UCC.\n",
+ __FUNCTION__);
return -ENOENT;
}
diff --git a/arch/powerpc/sysdev/qe_lib/ucc_fast.c b/arch/powerpc/sysdev/qe_lib/ucc_fast.c
index 3df202e..3223acb 100644
--- a/arch/powerpc/sysdev/qe_lib/ucc_fast.c
+++ b/arch/powerpc/sysdev/qe_lib/ucc_fast.c
@@ -30,46 +30,45 @@
void ucc_fast_dump_regs(struct ucc_fast_private * uccf)
{
- printk(KERN_INFO "UCC%d Fast registers:", uccf->uf_info->ucc_num);
- printk(KERN_INFO "Base address: 0x%08x", (u32) uccf->uf_regs);
-
- printk(KERN_INFO "gumr : addr - 0x%08x, val - 0x%08x",
- (u32) & uccf->uf_regs->gumr, in_be32(&uccf->uf_regs->gumr));
- printk(KERN_INFO "upsmr : addr - 0x%08x, val - 0x%08x",
- (u32) & uccf->uf_regs->upsmr, in_be32(&uccf->uf_regs->upsmr));
- printk(KERN_INFO "utodr : addr - 0x%08x, val - 0x%04x",
- (u32) & uccf->uf_regs->utodr, in_be16(&uccf->uf_regs->utodr));
- printk(KERN_INFO "udsr : addr - 0x%08x, val - 0x%04x",
- (u32) & uccf->uf_regs->udsr, in_be16(&uccf->uf_regs->udsr));
- printk(KERN_INFO "ucce : addr - 0x%08x, val - 0x%08x",
- (u32) & uccf->uf_regs->ucce, in_be32(&uccf->uf_regs->ucce));
- printk(KERN_INFO "uccm : addr - 0x%08x, val - 0x%08x",
- (u32) & uccf->uf_regs->uccm, in_be32(&uccf->uf_regs->uccm));
- printk(KERN_INFO "uccs : addr - 0x%08x, val - 0x%02x",
- (u32) & uccf->uf_regs->uccs, uccf->uf_regs->uccs);
- printk(KERN_INFO "urfb : addr - 0x%08x, val - 0x%08x",
- (u32) & uccf->uf_regs->urfb, in_be32(&uccf->uf_regs->urfb));
- printk(KERN_INFO "urfs : addr - 0x%08x, val - 0x%04x",
- (u32) & uccf->uf_regs->urfs, in_be16(&uccf->uf_regs->urfs));
- printk(KERN_INFO "urfet : addr - 0x%08x, val - 0x%04x",
- (u32) & uccf->uf_regs->urfet, in_be16(&uccf->uf_regs->urfet));
- printk(KERN_INFO "urfset: addr - 0x%08x, val - 0x%04x",
- (u32) & uccf->uf_regs->urfset,
- in_be16(&uccf->uf_regs->urfset));
- printk(KERN_INFO "utfb : addr - 0x%08x, val - 0x%08x",
- (u32) & uccf->uf_regs->utfb, in_be32(&uccf->uf_regs->utfb));
- printk(KERN_INFO "utfs : addr - 0x%08x, val - 0x%04x",
- (u32) & uccf->uf_regs->utfs, in_be16(&uccf->uf_regs->utfs));
- printk(KERN_INFO "utfet : addr - 0x%08x, val - 0x%04x",
- (u32) & uccf->uf_regs->utfet, in_be16(&uccf->uf_regs->utfet));
- printk(KERN_INFO "utftt : addr - 0x%08x, val - 0x%04x",
- (u32) & uccf->uf_regs->utftt, in_be16(&uccf->uf_regs->utftt));
- printk(KERN_INFO "utpt : addr - 0x%08x, val - 0x%04x",
- (u32) & uccf->uf_regs->utpt, in_be16(&uccf->uf_regs->utpt));
- printk(KERN_INFO "urtry : addr - 0x%08x, val - 0x%08x",
- (u32) & uccf->uf_regs->urtry, in_be32(&uccf->uf_regs->urtry));
- printk(KERN_INFO "guemr : addr - 0x%08x, val - 0x%02x",
- (u32) & uccf->uf_regs->guemr, uccf->uf_regs->guemr);
+ printk(KERN_INFO "UCC%u Fast registers:\n", uccf->uf_info->ucc_num);
+ printk(KERN_INFO "Base address: 0x%p\n", uccf->uf_regs);
+
+ printk(KERN_INFO "gumr : addr=0x%p, val=0x%08x\n",
+ &uccf->uf_regs->gumr, in_be32(&uccf->uf_regs->gumr));
+ printk(KERN_INFO "upsmr : addr=0x%p, val=0x%08x\n",
+ &uccf->uf_regs->upsmr, in_be32(&uccf->uf_regs->upsmr));
+ printk(KERN_INFO "utodr : addr=0x%p, val=0x%04x\n",
+ &uccf->uf_regs->utodr, in_be16(&uccf->uf_regs->utodr));
+ printk(KERN_INFO "udsr : addr=0x%p, val=0x%04x\n",
+ &uccf->uf_regs->udsr, in_be16(&uccf->uf_regs->udsr));
+ printk(KERN_INFO "ucce : addr=0x%p, val=0x%08x\n",
+ &uccf->uf_regs->ucce, in_be32(&uccf->uf_regs->ucce));
+ printk(KERN_INFO "uccm : addr=0x%p, val=0x%08x\n",
+ &uccf->uf_regs->uccm, in_be32(&uccf->uf_regs->uccm));
+ printk(KERN_INFO "uccs : addr=0x%p, val=0x%02x\n",
+ &uccf->uf_regs->uccs, uccf->uf_regs->uccs);
+ printk(KERN_INFO "urfb : addr=0x%p, val=0x%08x\n",
+ &uccf->uf_regs->urfb, in_be32(&uccf->uf_regs->urfb));
+ printk(KERN_INFO "urfs : addr=0x%p, val=0x%04x\n",
+ &uccf->uf_regs->urfs, in_be16(&uccf->uf_regs->urfs));
+ printk(KERN_INFO "urfet : addr=0x%p, val=0x%04x\n",
+ &uccf->uf_regs->urfet, in_be16(&uccf->uf_regs->urfet));
+ printk(KERN_INFO "urfset: addr=0x%p, val=0x%04x\n",
+ &uccf->uf_regs->urfset, in_be16(&uccf->uf_regs->urfset));
+ printk(KERN_INFO "utfb : addr=0x%p, val=0x%08x\n",
+ &uccf->uf_regs->utfb, in_be32(&uccf->uf_regs->utfb));
+ printk(KERN_INFO "utfs : addr=0x%p, val=0x%04x\n",
+ &uccf->uf_regs->utfs, in_be16(&uccf->uf_regs->utfs));
+ printk(KERN_INFO "utfet : addr=0x%p, val=0x%04x\n",
+ &uccf->uf_regs->utfet, in_be16(&uccf->uf_regs->utfet));
+ printk(KERN_INFO "utftt : addr=0x%p, val=0x%04x\n",
+ &uccf->uf_regs->utftt, in_be16(&uccf->uf_regs->utftt));
+ printk(KERN_INFO "utpt : addr=0x%p, val=0x%04x\n",
+ &uccf->uf_regs->utpt, in_be16(&uccf->uf_regs->utpt));
+ printk(KERN_INFO "urtry : addr=0x%p, val=0x%08x\n",
+ &uccf->uf_regs->urtry, in_be32(&uccf->uf_regs->urtry));
+ printk(KERN_INFO "guemr : addr=0x%p, val=0x%02x\n",
+ &uccf->uf_regs->guemr, uccf->uf_regs->guemr);
}
EXPORT_SYMBOL(ucc_fast_dump_regs);
@@ -149,55 +148,57 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc
/* check if the UCC port number is in range. */
if ((uf_info->ucc_num < 0) || (uf_info->ucc_num > UCC_MAX_NUM - 1)) {
- printk(KERN_ERR "%s: illegal UCC number", __FUNCTION__);
+ printk(KERN_ERR "%s: illegal UCC number\n", __FUNCTION__);
return -EINVAL;
}
/* Check that 'max_rx_buf_length' is properly aligned (4). */
if (uf_info->max_rx_buf_length & (UCC_FAST_MRBLR_ALIGNMENT - 1)) {
- printk(KERN_ERR "%s: max_rx_buf_length not aligned", __FUNCTION__);
+ printk(KERN_ERR "%s: max_rx_buf_length not aligned\n",
+ __FUNCTION__);
return -EINVAL;
}
/* Validate Virtual Fifo register values */
if (uf_info->urfs < UCC_FAST_URFS_MIN_VAL) {
- printk(KERN_ERR "%s: urfs is too small", __FUNCTION__);
+ printk(KERN_ERR "%s: urfs is too small\n", __FUNCTION__);
return -EINVAL;
}
if (uf_info->urfs & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
- printk(KERN_ERR "%s: urfs is not aligned", __FUNCTION__);
+ printk(KERN_ERR "%s: urfs is not aligned\n", __FUNCTION__);
return -EINVAL;
}
if (uf_info->urfet & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
- printk(KERN_ERR "%s: urfet is not aligned.", __FUNCTION__);
+ printk(KERN_ERR "%s: urfet is not aligned.\n", __FUNCTION__);
return -EINVAL;
}
if (uf_info->urfset & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
- printk(KERN_ERR "%s: urfset is not aligned", __FUNCTION__);
+ printk(KERN_ERR "%s: urfset is not aligned\n", __FUNCTION__);
return -EINVAL;
}
if (uf_info->utfs & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
- printk(KERN_ERR "%s: utfs is not aligned", __FUNCTION__);
+ printk(KERN_ERR "%s: utfs is not aligned\n", __FUNCTION__);
return -EINVAL;
}
if (uf_info->utfet & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
- printk(KERN_ERR "%s: utfet is not aligned", __FUNCTION__);
+ printk(KERN_ERR "%s: utfet is not aligned\n", __FUNCTION__);
return -EINVAL;
}
if (uf_info->utftt & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
- printk(KERN_ERR "%s: utftt is not aligned", __FUNCTION__);
+ printk(KERN_ERR "%s: utftt is not aligned\n", __FUNCTION__);
return -EINVAL;
}
uccf = kzalloc(sizeof(struct ucc_fast_private), GFP_KERNEL);
if (!uccf) {
- printk(KERN_ERR "%s: Cannot allocate private data", __FUNCTION__);
+ printk(KERN_ERR "%s: Cannot allocate private data\n",
+ __FUNCTION__);
return -ENOMEM;
}
@@ -206,7 +207,7 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc
/* Set the PHY base address */
uccf->uf_regs = ioremap(uf_info->regs, sizeof(struct ucc_fast));
if (uccf->uf_regs == NULL) {
- printk(KERN_ERR "%s: Cannot map UCC registers", __FUNCTION__);
+ printk(KERN_ERR "%s: Cannot map UCC registers\n", __FUNCTION__);
return -ENOMEM;
}
@@ -226,18 +227,10 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc
uccf->rx_discarded = 0;
#endif /* STATISTICS */
- /* Init Guemr register */
- if ((ret = ucc_init_guemr((struct ucc_common *) (uf_regs)))) {
- printk(KERN_ERR "%s: cannot init GUEMR", __FUNCTION__);
- ucc_fast_free(uccf);
- return ret;
- }
-
/* Set UCC to fast type */
- if ((ret = ucc_set_type(uf_info->ucc_num,
- (struct ucc_common *) (uf_regs),
- UCC_SPEED_TYPE_FAST))) {
- printk(KERN_ERR "%s: cannot set UCC type", __FUNCTION__);
+ ret = ucc_set_type(uf_info->ucc_num, UCC_SPEED_TYPE_FAST);
+ if (ret) {
+ printk(KERN_ERR "%s: cannot set UCC type\n", __FUNCTION__);
ucc_fast_free(uccf);
return ret;
}
@@ -276,7 +269,8 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc
uccf->ucc_fast_tx_virtual_fifo_base_offset =
qe_muram_alloc(uf_info->utfs, UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT);
if (IS_ERR_VALUE(uccf->ucc_fast_tx_virtual_fifo_base_offset)) {
- printk(KERN_ERR "%s: cannot allocate MURAM for TX FIFO", __FUNCTION__);
+ printk(KERN_ERR "%s: cannot allocate MURAM for TX FIFO\n",
+ __FUNCTION__);
uccf->ucc_fast_tx_virtual_fifo_base_offset = 0;
ucc_fast_free(uccf);
return -ENOMEM;
@@ -288,7 +282,8 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc
UCC_FAST_RECEIVE_VIRTUAL_FIFO_SIZE_FUDGE_FACTOR,
UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT);
if (IS_ERR_VALUE(uccf->ucc_fast_rx_virtual_fifo_base_offset)) {
- printk(KERN_ERR "%s: cannot allocate MURAM for RX FIFO", __FUNCTION__);
+ printk(KERN_ERR "%s: cannot allocate MURAM for RX FIFO\n",
+ __FUNCTION__);
uccf->ucc_fast_rx_virtual_fifo_base_offset = 0;
ucc_fast_free(uccf);
return -ENOMEM;
@@ -318,7 +313,7 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc
if ((uf_info->rx_clock != QE_CLK_NONE) &&
ucc_set_qe_mux_rxtx(uf_info->ucc_num, uf_info->rx_clock,
COMM_DIR_RX)) {
- printk(KERN_ERR "%s: illegal value for RX clock",
+ printk(KERN_ERR "%s: illegal value for RX clock\n",
__FUNCTION__);
ucc_fast_free(uccf);
return -EINVAL;
@@ -327,7 +322,7 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc
if ((uf_info->tx_clock != QE_CLK_NONE) &&
ucc_set_qe_mux_rxtx(uf_info->ucc_num, uf_info->tx_clock,
COMM_DIR_TX)) {
- printk(KERN_ERR "%s: illegal value for TX clock",
+ printk(KERN_ERR "%s: illegal value for TX clock\n",
__FUNCTION__);
ucc_fast_free(uccf);
return -EINVAL;
diff --git a/arch/powerpc/sysdev/qe_lib/ucc_slow.c b/arch/powerpc/sysdev/qe_lib/ucc_slow.c
index 1f65c26..0174b3a 100644
--- a/arch/powerpc/sysdev/qe_lib/ucc_slow.c
+++ b/arch/powerpc/sysdev/qe_lib/ucc_slow.c
@@ -115,11 +115,15 @@ void ucc_slow_disable(struct ucc_slow_private * uccs, enum comm_dir mode)
out_be32(&us_regs->gumr_l, gumr_l);
}
+/* Initialize the UCC for Slow operations
+ *
+ * The caller should initialize the following us_info
+ */
int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** uccs_ret)
{
struct ucc_slow_private *uccs;
u32 i;
- struct ucc_slow *us_regs;
+ struct ucc_slow __iomem *us_regs;
u32 gumr;
struct qe_bd *bd;
u32 id;
@@ -131,7 +135,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc
/* check if the UCC port number is in range. */
if ((us_info->ucc_num < 0) || (us_info->ucc_num > UCC_MAX_NUM - 1)) {
- printk(KERN_ERR "%s: illegal UCC number", __FUNCTION__);
+ printk(KERN_ERR "%s: illegal UCC number\n", __FUNCTION__);
return -EINVAL;
}
@@ -143,13 +147,14 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc
*/
if ((!us_info->rfw) &&
(us_info->max_rx_buf_length & (UCC_SLOW_MRBLR_ALIGNMENT - 1))) {
- printk(KERN_ERR "max_rx_buf_length not aligned.");
+ printk(KERN_ERR "max_rx_buf_length not aligned.\n");
return -EINVAL;
}
uccs = kzalloc(sizeof(struct ucc_slow_private), GFP_KERNEL);
if (!uccs) {
- printk(KERN_ERR "%s: Cannot allocate private data", __FUNCTION__);
+ printk(KERN_ERR "%s: Cannot allocate private data\n",
+ __FUNCTION__);
return -ENOMEM;
}
@@ -158,7 +163,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc
/* Set the PHY base address */
uccs->us_regs = ioremap(us_info->regs, sizeof(struct ucc_slow));
if (uccs->us_regs == NULL) {
- printk(KERN_ERR "%s: Cannot map UCC registers", __FUNCTION__);
+ printk(KERN_ERR "%s: Cannot map UCC registers\n", __FUNCTION__);
return -ENOMEM;
}
@@ -182,22 +187,14 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc
return -ENOMEM;
}
id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num);
- qe_issue_cmd(QE_ASSIGN_PAGE_TO_DEVICE, id, QE_CR_PROTOCOL_UNSPECIFIED,
+ qe_issue_cmd(QE_ASSIGN_PAGE_TO_DEVICE, id, us_info->protocol,
uccs->us_pram_offset);
uccs->us_pram = qe_muram_addr(uccs->us_pram_offset);
- /* Init Guemr register */
- if ((ret = ucc_init_guemr((struct ucc_common *) us_regs))) {
- printk(KERN_ERR "%s: cannot init GUEMR", __FUNCTION__);
- ucc_slow_free(uccs);
- return ret;
- }
-
/* Set UCC to slow type */
- if ((ret = ucc_set_type(us_info->ucc_num,
- (struct ucc_common *) us_regs,
- UCC_SPEED_TYPE_SLOW))) {
+ ret = ucc_set_type(us_info->ucc_num, UCC_SPEED_TYPE_SLOW);
+ if (ret) {
printk(KERN_ERR "%s: cannot set UCC type", __FUNCTION__);
ucc_slow_free(uccs);
return ret;
@@ -212,7 +209,8 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc
qe_muram_alloc(us_info->rx_bd_ring_len * sizeof(struct qe_bd),
QE_ALIGNMENT_OF_BD);
if (IS_ERR_VALUE(uccs->rx_base_offset)) {
- printk(KERN_ERR "%s: cannot allocate RX BDs", __FUNCTION__);
+ printk(KERN_ERR "%s: cannot allocate %u RX BDs\n", __FUNCTION__,
+ us_info->rx_bd_ring_len);
uccs->rx_base_offset = 0;
ucc_slow_free(uccs);
return -ENOMEM;
@@ -292,12 +290,12 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc
/* if the data is in cachable memory, the 'global' */
/* in the function code should be set. */
- uccs->us_pram->tfcr = uccs->us_pram->rfcr =
- us_info->data_mem_part | QE_BMR_BYTE_ORDER_BO_MOT;
+ uccs->us_pram->tbmr = UCC_BMR_BO_BE;
+ uccs->us_pram->rbmr = UCC_BMR_BO_BE;
/* rbase, tbase are offsets from MURAM base */
- out_be16(&uccs->us_pram->rbase, uccs->us_pram_offset);
- out_be16(&uccs->us_pram->tbase, uccs->us_pram_offset);
+ out_be16(&uccs->us_pram->rbase, uccs->rx_base_offset);
+ out_be16(&uccs->us_pram->tbase, uccs->tx_base_offset);
/* Mux clocking */
/* Grant Support */
@@ -311,7 +309,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc
/* Rx clock routing */
if (ucc_set_qe_mux_rxtx(us_info->ucc_num, us_info->rx_clock,
COMM_DIR_RX)) {
- printk(KERN_ERR "%s: illegal value for RX clock",
+ printk(KERN_ERR "%s: illegal value for RX clock\n",
__FUNCTION__);
ucc_slow_free(uccs);
return -EINVAL;
@@ -319,7 +317,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc
/* Tx clock routing */
if (ucc_set_qe_mux_rxtx(us_info->ucc_num, us_info->tx_clock,
COMM_DIR_TX)) {
- printk(KERN_ERR "%s: illegal value for TX clock",
+ printk(KERN_ERR "%s: illegal value for TX clock\n",
__FUNCTION__);
ucc_slow_free(uccs);
return -EINVAL;
@@ -343,8 +341,8 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc
command = QE_INIT_TX;
else
command = QE_INIT_RX; /* We know at least one is TRUE */
- id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num);
- qe_issue_cmd(command, id, QE_CR_PROTOCOL_UNSPECIFIED, 0);
+
+ qe_issue_cmd(command, id, us_info->protocol, 0);
*uccs_ret = uccs;
return 0;
diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c
index 9a38dfe..96ebdf7 100644
--- a/drivers/net/ucc_geth.c
+++ b/drivers/net/ucc_geth.c
@@ -2919,7 +2919,7 @@ static int ucc_geth_startup(struct ucc_geth_private *ugeth)
test = in_be16(&ugeth->p_tx_glbl_pram->temoder);
/* Function code register value to be used later */
- function_code = QE_BMR_BYTE_ORDER_BO_MOT | UCC_FAST_FUNCTION_CODE_GBL;
+ function_code = UCC_BMR_BO_BE | UCC_BMR_GBL;
/* Required for QE */
/* function code register */
diff --git a/include/asm-powerpc/immap_qe.h b/include/asm-powerpc/immap_qe.h
index 1020b7f..0a0644b 100644
--- a/include/asm-powerpc/immap_qe.h
+++ b/include/asm-powerpc/immap_qe.h
@@ -260,7 +260,6 @@ struct ucc_slow {
__be16 utpt;
u8 res4[0x52];
u8 guemr; /* UCC general extended mode register */
- u8 res5[0x200 - 0x091];
} __attribute__ ((packed));
/* QE UCC Fast */
@@ -293,21 +292,13 @@ struct ucc_fast {
__be32 urtry; /* UCC retry counter register */
u8 res8[0x4C];
u8 guemr; /* UCC general extended mode register */
- u8 res9[0x100 - 0x091];
-} __attribute__ ((packed));
-
-/* QE UCC */
-struct ucc_common {
- u8 res1[0x90];
- u8 guemr;
- u8 res2[0x200 - 0x091];
} __attribute__ ((packed));
struct ucc {
union {
struct ucc_slow slow;
struct ucc_fast fast;
- struct ucc_common common;
+ u8 res[0x200]; /* UCC blocks are 512 bytes each */
};
} __attribute__ ((packed));
@@ -406,7 +397,7 @@ struct dbg {
/* RISC Special Registers (Trap and Breakpoint) */
struct rsp {
- u8 fixme[0x100];
+ u32 reg[0x40]; /* 64 32-bit registers */
} __attribute__ ((packed));
struct qe_immap {
@@ -435,11 +426,13 @@ struct qe_immap {
u8 res13[0x600];
struct upc upc2; /* MultiPHY UTOPIA POS Ctrlr 2*/
struct sdma sdma; /* SDMA */
- struct dbg dbg; /* Debug Space */
- struct rsp rsp[0x2]; /* RISC Special Registers
+ struct dbg dbg; /* 0x104080 - 0x1040FF
+ Debug Space */
+ struct rsp rsp[0x2]; /* 0x104100 - 0x1042FF
+ RISC Special Registers
(Trap and Breakpoint) */
- u8 res14[0x300];
- u8 res15[0x3A00];
+ u8 res14[0x300]; /* 0x104300 - 0x1045FF */
+ u8 res15[0x3A00]; /* 0x104600 - 0x107FFF */
u8 res16[0x8000]; /* 0x108000 - 0x110000 */
u8 muram[0xC000]; /* 0x110000 - 0x11C000
Multi-user RAM */
diff --git a/include/asm-powerpc/qe.h b/include/asm-powerpc/qe.h
index 9d304b1..a92e07a 100644
--- a/include/asm-powerpc/qe.h
+++ b/include/asm-powerpc/qe.h
@@ -35,7 +35,7 @@ extern int par_io_of_config(struct device_node *np);
/* QE internal API */
int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol, u32 cmd_input);
-void qe_setbrg(u32 brg, u32 rate);
+void qe_setbrg(unsigned int brg, unsigned int rate, unsigned int multiplier);
int qe_get_snum(void);
void qe_put_snum(u8 snum);
unsigned long qe_muram_alloc(int size, int align);
@@ -46,14 +46,28 @@ void *qe_muram_addr(unsigned long offset);
/* Buffer descriptors */
struct qe_bd {
- u16 status;
- u16 length;
- u32 buf;
+ __be16 status;
+ __be16 length;
+ __be32 buf;
} __attribute__ ((packed));
#define BD_STATUS_MASK 0xffff0000
#define BD_LENGTH_MASK 0x0000ffff
+#define BD_SC_EMPTY 0x8000 /* Receive is empty */
+#define BD_SC_READY 0x8000 /* Transmit is ready */
+#define BD_SC_WRAP 0x2000 /* Last buffer descriptor */
+#define BD_SC_INTRPT 0x1000 /* Interrupt on change */
+#define BD_SC_LAST 0x0800 /* Last buffer in frame */
+#define BD_SC_CM 0x0200 /* Continous mode */
+#define BD_SC_ID 0x0100 /* Rec'd too many idles */
+#define BD_SC_P 0x0100 /* xmt preamble */
+#define BD_SC_BR 0x0020 /* Break received */
+#define BD_SC_FR 0x0010 /* Framing error */
+#define BD_SC_PR 0x0008 /* Parity error */
+#define BD_SC_OV 0x0002 /* Overrun */
+#define BD_SC_CD 0x0001 /* ?? */
+
/* Alignment */
#define QE_INTR_TABLE_ALIGN 16 /* ??? */
#define QE_ALIGNMENT_OF_BD 8
@@ -266,15 +280,12 @@ enum qe_clock {
/* QE CECR Protocol - For non-MCC, specifies mode for QE CECR command */
#define QE_CR_PROTOCOL_UNSPECIFIED 0x00 /* For all other protocols */
#define QE_CR_PROTOCOL_HDLC_TRANSPARENT 0x00
+#define QE_CR_PROTOCOL_QMC 0x02
+#define QE_CR_PROTOCOL_UART 0x04
#define QE_CR_PROTOCOL_ATM_POS 0x0A
#define QE_CR_PROTOCOL_ETHERNET 0x0C
#define QE_CR_PROTOCOL_L2_SWITCH 0x0D
-/* BMR byte order */
-#define QE_BMR_BYTE_ORDER_BO_PPC 0x08 /* powerpc little endian */
-#define QE_BMR_BYTE_ORDER_BO_MOT 0x10 /* motorola big endian */
-#define QE_BMR_BYTE_ORDER_BO_MAX 0x18
-
/* BRG configuration register */
#define QE_BRGC_ENABLE 0x00010000
#define QE_BRGC_DIVISOR_SHIFT 1
@@ -321,41 +332,41 @@ enum qe_clock {
#define UPGCR_ADDR 0x10000000 /* Master MPHY Addr multiplexing */
#define UPGCR_DIAG 0x01000000 /* Diagnostic mode */
-/* UCC */
+/* UCC GUEMR register */
#define UCC_GUEMR_MODE_MASK_RX 0x02
-#define UCC_GUEMR_MODE_MASK_TX 0x01
#define UCC_GUEMR_MODE_FAST_RX 0x02
-#define UCC_GUEMR_MODE_FAST_TX 0x01
#define UCC_GUEMR_MODE_SLOW_RX 0x00
+#define UCC_GUEMR_MODE_MASK_TX 0x01
+#define UCC_GUEMR_MODE_FAST_TX 0x01
#define UCC_GUEMR_MODE_SLOW_TX 0x00
+#define UCC_GUEMR_MODE_MASK (UCC_GUEMR_MODE_MASK_RX | UCC_GUEMR_MODE_MASK_TX)
#define UCC_GUEMR_SET_RESERVED3 0x10 /* Bit 3 in the guemr is reserved but
must be set 1 */
/* structure representing UCC SLOW parameter RAM */
struct ucc_slow_pram {
- u16 rbase; /* RX BD base address */
- u16 tbase; /* TX BD base address */
- u8 rfcr; /* Rx function code */
- u8 tfcr; /* Tx function code */
- u16 mrblr; /* Rx buffer length */
- u32 rstate; /* Rx internal state */
- u32 rptr; /* Rx internal data pointer */
- u16 rbptr; /* rb BD Pointer */
- u16 rcount; /* Rx internal byte count */
- u32 rtemp; /* Rx temp */
- u32 tstate; /* Tx internal state */
- u32 tptr; /* Tx internal data pointer */
- u16 tbptr; /* Tx BD pointer */
- u16 tcount; /* Tx byte count */
- u32 ttemp; /* Tx temp */
- u32 rcrc; /* temp receive CRC */
- u32 tcrc; /* temp transmit CRC */
+ __be16 rbase; /* RX BD base address */
+ __be16 tbase; /* TX BD base address */
+ u8 rbmr; /* RX bus mode register (same as CPM's RFCR) */
+ u8 tbmr; /* TX bus mode register (same as CPM's TFCR) */
+ __be16 mrblr; /* Rx buffer length */
+ __be32 rstate; /* Rx internal state */
+ __be32 rptr; /* Rx internal data pointer */
+ __be16 rbptr; /* rb BD Pointer */
+ __be16 rcount; /* Rx internal byte count */
+ __be32 rtemp; /* Rx temp */
+ __be32 tstate; /* Tx internal state */
+ __be32 tptr; /* Tx internal data pointer */
+ __be16 tbptr; /* Tx BD pointer */
+ __be16 tcount; /* Tx byte count */
+ __be32 ttemp; /* Tx temp */
+ __be32 rcrc; /* temp receive CRC */
+ __be32 tcrc; /* temp transmit CRC */
} __attribute__ ((packed));
/* General UCC SLOW Mode Register (GUMRH & GUMRL) */
-#define UCC_SLOW_GUMR_H_CRC16 0x00004000
-#define UCC_SLOW_GUMR_H_CRC16CCITT 0x00000000
-#define UCC_SLOW_GUMR_H_CRC32CCITT 0x00008000
+#define UCC_SLOW_GUMR_H_SAM_QMC 0x00000000
+#define UCC_SLOW_GUMR_H_SAM_SATM 0x00008000
#define UCC_SLOW_GUMR_H_REVD 0x00002000
#define UCC_SLOW_GUMR_H_TRX 0x00001000
#define UCC_SLOW_GUMR_H_TTX 0x00000800
@@ -375,9 +386,33 @@ struct ucc_slow_pram {
#define UCC_SLOW_GUMR_L_TCI 0x10000000
#define UCC_SLOW_GUMR_L_RINV 0x02000000
#define UCC_SLOW_GUMR_L_TINV 0x01000000
-#define UCC_SLOW_GUMR_L_TEND 0x00020000
+#define UCC_SLOW_GUMR_L_TEND 0x00040000
+#define UCC_SLOW_GUMR_L_TDCR_MASK 0x00030000
+#define UCC_SLOW_GUMR_L_TDCR_32 0x00030000
+#define UCC_SLOW_GUMR_L_TDCR_16 0x00020000
+#define UCC_SLOW_GUMR_L_TDCR_8 0x00010000
+#define UCC_SLOW_GUMR_L_TDCR_1 0x00000000
+#define UCC_SLOW_GUMR_L_RDCR_MASK 0x0000c000
+#define UCC_SLOW_GUMR_L_RDCR_32 0x0000c000
+#define UCC_SLOW_GUMR_L_RDCR_16 0x00008000
+#define UCC_SLOW_GUMR_L_RDCR_8 0x00004000
+#define UCC_SLOW_GUMR_L_RDCR_1 0x00000000
+#define UCC_SLOW_GUMR_L_RENC_NRZI 0x00000800
+#define UCC_SLOW_GUMR_L_RENC_NRZ 0x00000000
+#define UCC_SLOW_GUMR_L_TENC_NRZI 0x00000100
+#define UCC_SLOW_GUMR_L_TENC_NRZ 0x00000000
+#define UCC_SLOW_GUMR_L_DIAG_MASK 0x000000c0
+#define UCC_SLOW_GUMR_L_DIAG_LE 0x000000c0
+#define UCC_SLOW_GUMR_L_DIAG_ECHO 0x00000080
+#define UCC_SLOW_GUMR_L_DIAG_LOOP 0x00000040
+#define UCC_SLOW_GUMR_L_DIAG_NORM 0x00000000
#define UCC_SLOW_GUMR_L_ENR 0x00000020
#define UCC_SLOW_GUMR_L_ENT 0x00000010
+#define UCC_SLOW_GUMR_L_MODE_MASK 0x0000000F
+#define UCC_SLOW_GUMR_L_MODE_BISYNC 0x00000008
+#define UCC_SLOW_GUMR_L_MODE_AHDLC 0x00000006
+#define UCC_SLOW_GUMR_L_MODE_UART 0x00000004
+#define UCC_SLOW_GUMR_L_MODE_QMC 0x00000002
/* General UCC FAST Mode Register */
#define UCC_FAST_GUMR_TCI 0x20000000
@@ -394,53 +429,111 @@ struct ucc_slow_pram {
#define UCC_FAST_GUMR_ENR 0x00000020
#define UCC_FAST_GUMR_ENT 0x00000010
-/* Slow UCC Event Register (UCCE) */
-#define UCC_SLOW_UCCE_GLR 0x1000
-#define UCC_SLOW_UCCE_GLT 0x0800
-#define UCC_SLOW_UCCE_DCC 0x0400
-#define UCC_SLOW_UCCE_FLG 0x0200
-#define UCC_SLOW_UCCE_AB 0x0200
-#define UCC_SLOW_UCCE_IDLE 0x0100
-#define UCC_SLOW_UCCE_GRA 0x0080
-#define UCC_SLOW_UCCE_TXE 0x0010
-#define UCC_SLOW_UCCE_RXF 0x0008
-#define UCC_SLOW_UCCE_CCR 0x0008
-#define UCC_SLOW_UCCE_RCH 0x0008
-#define UCC_SLOW_UCCE_BSY 0x0004
-#define UCC_SLOW_UCCE_TXB 0x0002
-#define UCC_SLOW_UCCE_TX 0x0002
-#define UCC_SLOW_UCCE_RX 0x0001
-#define UCC_SLOW_UCCE_GOV 0x0001
-#define UCC_SLOW_UCCE_GUN 0x0002
-#define UCC_SLOW_UCCE_GINT 0x0004
-#define UCC_SLOW_UCCE_IQOV 0x0008
-
-#define UCC_SLOW_UCCE_HDLC_SET (UCC_SLOW_UCCE_TXE | UCC_SLOW_UCCE_BSY | \
- UCC_SLOW_UCCE_GRA | UCC_SLOW_UCCE_TXB | UCC_SLOW_UCCE_RXF | \
- UCC_SLOW_UCCE_DCC | UCC_SLOW_UCCE_GLT | UCC_SLOW_UCCE_GLR)
-#define UCC_SLOW_UCCE_ENET_SET (UCC_SLOW_UCCE_TXE | UCC_SLOW_UCCE_BSY | \
- UCC_SLOW_UCCE_GRA | UCC_SLOW_UCCE_TXB | UCC_SLOW_UCCE_RXF)
-#define UCC_SLOW_UCCE_TRANS_SET (UCC_SLOW_UCCE_TXE | UCC_SLOW_UCCE_BSY | \
- UCC_SLOW_UCCE_GRA | UCC_SLOW_UCCE_TX | UCC_SLOW_UCCE_RX | \
- UCC_SLOW_UCCE_DCC | UCC_SLOW_UCCE_GLT | UCC_SLOW_UCCE_GLR)
-#define UCC_SLOW_UCCE_UART_SET (UCC_SLOW_UCCE_BSY | UCC_SLOW_UCCE_GRA | \
- UCC_SLOW_UCCE_TXB | UCC_SLOW_UCCE_TX | UCC_SLOW_UCCE_RX | \
- UCC_SLOW_UCCE_GLT | UCC_SLOW_UCCE_GLR)
-#define UCC_SLOW_UCCE_QMC_SET (UCC_SLOW_UCCE_IQOV | UCC_SLOW_UCCE_GINT | \
- UCC_SLOW_UCCE_GUN | UCC_SLOW_UCCE_GOV)
-
-#define UCC_SLOW_UCCE_OTHER (UCC_SLOW_UCCE_TXE | UCC_SLOW_UCCE_BSY | \
- UCC_SLOW_UCCE_GRA | UCC_SLOW_UCCE_DCC | UCC_SLOW_UCCE_GLT | \
- UCC_SLOW_UCCE_GLR)
-
-#define UCC_SLOW_INTR_TX UCC_SLOW_UCCE_TXB
-#define UCC_SLOW_INTR_RX (UCC_SLOW_UCCE_RXF | UCC_SLOW_UCCE_RX)
-#define UCC_SLOW_INTR (UCC_SLOW_INTR_TX | UCC_SLOW_INTR_RX)
+/* UART Slow UCC Event Register (UCCE) */
+#define UCC_UART_UCCE_AB 0x0200
+#define UCC_UART_UCCE_IDLE 0x0100
+#define UCC_UART_UCCE_GRA 0x0080
+#define UCC_UART_UCCE_BRKE 0x0040
+#define UCC_UART_UCCE_BRKS 0x0020
+#define UCC_UART_UCCE_CCR 0x0008
+#define UCC_UART_UCCE_BSY 0x0004
+#define UCC_UART_UCCE_TX 0x0002
+#define UCC_UART_UCCE_RX 0x0001
+
+/* HDLC Slow UCC Event Register (UCCE) */
+#define UCC_HDLC_UCCE_GLR 0x1000
+#define UCC_HDLC_UCCE_GLT 0x0800
+#define UCC_HDLC_UCCE_IDLE 0x0100
+#define UCC_HDLC_UCCE_BRKE 0x0040
+#define UCC_HDLC_UCCE_BRKS 0x0020
+#define UCC_HDLC_UCCE_TXE 0x0010
+#define UCC_HDLC_UCCE_RXF 0x0008
+#define UCC_HDLC_UCCE_BSY 0x0004
+#define UCC_HDLC_UCCE_TXB 0x0002
+#define UCC_HDLC_UCCE_RXB 0x0001
+
+/* BISYNC Slow UCC Event Register (UCCE) */
+#define UCC_BISYNC_UCCE_GRA 0x0080
+#define UCC_BISYNC_UCCE_TXE 0x0010
+#define UCC_BISYNC_UCCE_RCH 0x0008
+#define UCC_BISYNC_UCCE_BSY 0x0004
+#define UCC_BISYNC_UCCE_TXB 0x0002
+#define UCC_BISYNC_UCCE_RXB 0x0001
+
+/* Gigabit Ethernet Fast UCC Event Register (UCCE) */
+#define UCC_GETH_UCCE_MPD 0x80000000
+#define UCC_GETH_UCCE_SCAR 0x40000000
+#define UCC_GETH_UCCE_GRA 0x20000000
+#define UCC_GETH_UCCE_CBPR 0x10000000
+#define UCC_GETH_UCCE_BSY 0x08000000
+#define UCC_GETH_UCCE_RXC 0x04000000
+#define UCC_GETH_UCCE_TXC 0x02000000
+#define UCC_GETH_UCCE_TXE 0x01000000
+#define UCC_GETH_UCCE_TXB7 0x00800000
+#define UCC_GETH_UCCE_TXB6 0x00400000
+#define UCC_GETH_UCCE_TXB5 0x00200000
+#define UCC_GETH_UCCE_TXB4 0x00100000
+#define UCC_GETH_UCCE_TXB3 0x00080000
+#define UCC_GETH_UCCE_TXB2 0x00040000
+#define UCC_GETH_UCCE_TXB1 0x00020000
+#define UCC_GETH_UCCE_TXB0 0x00010000
+#define UCC_GETH_UCCE_RXB7 0x00008000
+#define UCC_GETH_UCCE_RXB6 0x00004000
+#define UCC_GETH_UCCE_RXB5 0x00002000
+#define UCC_GETH_UCCE_RXB4 0x00001000
+#define UCC_GETH_UCCE_RXB3 0x00000800
+#define UCC_GETH_UCCE_RXB2 0x00000400
+#define UCC_GETH_UCCE_RXB1 0x00000200
+#define UCC_GETH_UCCE_RXB0 0x00000100
+#define UCC_GETH_UCCE_RXF7 0x00000080
+#define UCC_GETH_UCCE_RXF6 0x00000040
+#define UCC_GETH_UCCE_RXF5 0x00000020
+#define UCC_GETH_UCCE_RXF4 0x00000010
+#define UCC_GETH_UCCE_RXF3 0x00000008
+#define UCC_GETH_UCCE_RXF2 0x00000004
+#define UCC_GETH_UCCE_RXF1 0x00000002
+#define UCC_GETH_UCCE_RXF0 0x00000001
+
+/* UPSMR, when used as a UART */
+#define UCC_UART_UPSMR_FLC 0x8000
+#define UCC_UART_UPSMR_SL 0x4000
+#define UCC_UART_UPSMR_CL_MASK 0x3000
+#define UCC_UART_UPSMR_CL_8 0x3000
+#define UCC_UART_UPSMR_CL_7 0x2000
+#define UCC_UART_UPSMR_CL_6 0x1000
+#define UCC_UART_UPSMR_CL_5 0x0000
+#define UCC_UART_UPSMR_UM_MASK 0x0c00
+#define UCC_UART_UPSMR_UM_NORMAL 0x0000
+#define UCC_UART_UPSMR_UM_MAN_MULTI 0x0400
+#define UCC_UART_UPSMR_UM_AUTO_MULTI 0x0c00
+#define UCC_UART_UPSMR_FRZ 0x0200
+#define UCC_UART_UPSMR_RZS 0x0100
+#define UCC_UART_UPSMR_SYN 0x0080
+#define UCC_UART_UPSMR_DRT 0x0040
+#define UCC_UART_UPSMR_PEN 0x0010
+#define UCC_UART_UPSMR_RPM_MASK 0x000c
+#define UCC_UART_UPSMR_RPM_ODD 0x0000
+#define UCC_UART_UPSMR_RPM_LOW 0x0004
+#define UCC_UART_UPSMR_RPM_EVEN 0x0008
+#define UCC_UART_UPSMR_RPM_HIGH 0x000C
+#define UCC_UART_UPSMR_TPM_MASK 0x0003
+#define UCC_UART_UPSMR_TPM_ODD 0x0000
+#define UCC_UART_UPSMR_TPM_LOW 0x0001
+#define UCC_UART_UPSMR_TPM_EVEN 0x0002
+#define UCC_UART_UPSMR_TPM_HIGH 0x0003
/* UCC Transmit On Demand Register (UTODR) */
#define UCC_SLOW_TOD 0x8000
#define UCC_FAST_TOD 0x8000
+/* UCC Bus Mode Register masks */
+/* Not to be confused with the Bundle Mode Register */
+#define UCC_BMR_GBL 0x20
+#define UCC_BMR_BO_BE 0x10
+#define UCC_BMR_CETM 0x04
+#define UCC_BMR_DTB 0x02
+#define UCC_BMR_BDB 0x01
+
/* Function code masks */
#define FC_GBL 0x20
#define FC_DTB_LCL 0x02
diff --git a/include/asm-powerpc/ucc.h b/include/asm-powerpc/ucc.h
index afe3076..f96ea54 100644
--- a/include/asm-powerpc/ucc.h
+++ b/include/asm-powerpc/ucc.h
@@ -28,35 +28,13 @@ enum ucc_speed_type {
UCC_SPEED_TYPE_FAST, UCC_SPEED_TYPE_SLOW
};
-/* Initial UCCs Parameter RAM address relative to: MEM_MAP_BASE (IMMR).
-*/
-enum ucc_pram_initial_offset {
- UCC_PRAM_OFFSET_UCC1 = 0x8400,
- UCC_PRAM_OFFSET_UCC2 = 0x8500,
- UCC_PRAM_OFFSET_UCC3 = 0x8600,
- UCC_PRAM_OFFSET_UCC4 = 0x9000,
- UCC_PRAM_OFFSET_UCC5 = 0x8000,
- UCC_PRAM_OFFSET_UCC6 = 0x8100,
- UCC_PRAM_OFFSET_UCC7 = 0x8200,
- UCC_PRAM_OFFSET_UCC8 = 0x8300
-};
-
/* ucc_set_type
* Sets UCC to slow or fast mode.
*
* ucc_num - (In) number of UCC (0-7).
- * regs - (In) pointer to registers base for the UCC.
* speed - (In) slow or fast mode for UCC.
*/
-int ucc_set_type(int ucc_num, struct ucc_common *regs,
- enum ucc_speed_type speed);
-
-/* ucc_init_guemr
- * Init the Guemr register.
- *
- * regs - (In) pointer to registers base for the UCC.
- */
-int ucc_init_guemr(struct ucc_common *regs);
+int ucc_set_type(unsigned int ucc_num, enum ucc_speed_type speed);
int ucc_set_qe_mux_mii_mng(int ucc_num);
diff --git a/include/asm-powerpc/ucc_slow.h b/include/asm-powerpc/ucc_slow.h
index fdaac9d..0980e6a 100644
--- a/include/asm-powerpc/ucc_slow.h
+++ b/include/asm-powerpc/ucc_slow.h
@@ -148,9 +148,10 @@ enum ucc_slow_diag_mode {
struct ucc_slow_info {
int ucc_num;
+ int protocol; /* QE_CR_PROTOCOL_xxx */
enum qe_clock rx_clock;
enum qe_clock tx_clock;
- u32 regs;
+ phys_addr_t regs;
int irq;
u16 uccm_mask;
int data_mem_part;
@@ -186,7 +187,7 @@ struct ucc_slow_info {
struct ucc_slow_private {
struct ucc_slow_info *us_info;
- struct ucc_slow *us_regs; /* a pointer to memory map of UCC regs */
+ struct ucc_slow __iomem *us_regs; /* Ptr to memory map of UCC regs */
struct ucc_slow_pram *us_pram; /* a pointer to the parameter RAM */
u32 us_pram_offset;
int enabled_tx; /* Whether channel is enabled for Tx (ENT) */
@@ -277,12 +278,12 @@ void ucc_slow_graceful_stop_tx(struct ucc_slow_private * uccs);
*/
void ucc_slow_stop_tx(struct ucc_slow_private * uccs);
-/* ucc_slow_restart_x
+/* ucc_slow_restart_tx
* Restarts transmitting on a specified slow UCC.
*
* uccs - (In) pointer to the slow UCC structure.
*/
-void ucc_slow_restart_x(struct ucc_slow_private * uccs);
+void ucc_slow_restart_tx(struct ucc_slow_private *uccs);
u32 ucc_slow_get_qe_cr_subblock(int uccs_num);
--
1.5.2.4
More information about the Linuxppc-dev
mailing list