[PATCH 22/28] cpm2: Add cpm2_set_pin().

Scott Wood scottwood at freescale.com
Tue Sep 18 02:58:09 EST 2007


This provides a generic way for board code to set up CPM pins, rather
than directly poking magic values into registers.

Signed-off-by: Scott Wood <scottwood at freescale.com>
---
 arch/powerpc/sysdev/cpm2_common.c |   33 +++++++++++++++++++++++++++++++++
 include/asm-powerpc/cpm2.h        |    9 +++++++++
 2 files changed, 42 insertions(+), 0 deletions(-)

diff --git a/arch/powerpc/sysdev/cpm2_common.c b/arch/powerpc/sysdev/cpm2_common.c
index 9f6ef65..9058da2 100644
--- a/arch/powerpc/sysdev/cpm2_common.c
+++ b/arch/powerpc/sysdev/cpm2_common.c
@@ -418,3 +418,36 @@ void *cpm_dpram_addr(unsigned long offset)
 	return (void *)(im_dprambase + offset);
 }
 EXPORT_SYMBOL(cpm_dpram_addr);
+
+struct cpm2_ioports {
+	u32 dir, par, sor, odr, dat;
+	u32 res[3];
+};
+
+void cpm2_set_pin(int port, int pin, int flags)
+{
+	struct cpm2_ioports __iomem *iop =
+		(struct cpm2_ioports __iomem *)&cpm2_immr->im_ioport;
+
+	pin = 1 << (31 - pin);
+
+	if (flags & CPM_PIN_OUTPUT)
+		setbits32(&iop[port].dir, pin);
+	else
+		clrbits32(&iop[port].dir, pin);
+
+	if (!(flags & CPM_PIN_GPIO))
+		setbits32(&iop[port].par, pin);
+	else
+		clrbits32(&iop[port].par, pin);
+
+	if (flags & CPM_PIN_SECONDARY)
+		setbits32(&iop[port].sor, pin);
+	else
+		clrbits32(&iop[port].sor, pin);
+
+	if (flags & CPM_PIN_OPENDRAIN)
+		setbits32(&iop[port].odr, pin);
+	else
+		clrbits32(&iop[port].odr, pin);
+}
diff --git a/include/asm-powerpc/cpm2.h b/include/asm-powerpc/cpm2.h
index 41a45db..d7b57ac 100644
--- a/include/asm-powerpc/cpm2.h
+++ b/include/asm-powerpc/cpm2.h
@@ -1247,5 +1247,14 @@ enum cpm_clk {
 extern int cpm2_clk_setup(enum cpm_clk_target target, int clock, int mode);
 extern int cpm2_smc_clk_setup(enum cpm_clk_target target, int clock);
 
+#define CPM_PIN_INPUT     0
+#define CPM_PIN_OUTPUT    1
+#define CPM_PIN_PRIMARY   0
+#define CPM_PIN_SECONDARY 2
+#define CPM_PIN_GPIO      4
+#define CPM_PIN_OPENDRAIN 8
+
+void cpm2_set_pin(int port, int pin, int flags);
+
 #endif /* __CPM2__ */
 #endif /* __KERNEL__ */
-- 
1.5.3.1




More information about the Linuxppc-dev mailing list