[PATCH 14/28] 8xx: Add pin and clock setting functions.
Scott Wood
scottwood at freescale.com
Tue Sep 18 02:57:43 EST 2007
These let board code set up pins and clocks without having to
put magic numbers directly into the registers.
The clock function is mostly duplicated from the cpm2 version;
hopefully this stuff can be merged at some point.
Signed-off-by: Scott Wood <scottwood at freescale.com>
---
arch/powerpc/sysdev/commproc.c | 201 ++++++++++++++++++++++++++++++++++++++++
include/asm-powerpc/commproc.h | 49 ++++++++++
2 files changed, 250 insertions(+), 0 deletions(-)
diff --git a/arch/powerpc/sysdev/commproc.c b/arch/powerpc/sysdev/commproc.c
index ddfa2e3..e37f0a8 100644
--- a/arch/powerpc/sysdev/commproc.c
+++ b/arch/powerpc/sysdev/commproc.c
@@ -397,3 +397,204 @@ uint cpm_dpram_phys(u8 *addr)
return (dpram_pbase + (uint)(addr - dpram_vbase));
}
EXPORT_SYMBOL(cpm_dpram_addr);
+
+struct cpm_ioport16 {
+ __be16 dir, par, sor, dat, intr;
+ __be16 res[3];
+};
+
+struct cpm_ioport32 {
+ __be32 dir, par, sor;
+};
+
+static void cpm1_set_pin32(int port, int pin, int flags)
+{
+ struct cpm_ioport32 __iomem *iop;
+ pin = 1 << (31 - pin);
+
+ if (port == CPM_PORTB)
+ iop = (struct cpm_ioport32 __iomem *)
+ &mpc8xx_immr->im_cpm.cp_pbdir;
+ else
+ iop = (struct cpm_ioport32 __iomem *)
+ &mpc8xx_immr->im_cpm.cp_pedir;
+
+ if (flags & CPM_PIN_OUTPUT)
+ setbits32(&iop->dir, pin);
+ else
+ clrbits32(&iop->dir, pin);
+
+ if (!(flags & CPM_PIN_GPIO))
+ setbits32(&iop->par, pin);
+ else
+ clrbits32(&iop->par, pin);
+
+ if (port == CPM_PORTE) {
+ if (flags & CPM_PIN_SECONDARY)
+ setbits32(&iop->sor, pin);
+ else
+ clrbits32(&iop->sor, pin);
+
+ if (flags & CPM_PIN_OPENDRAIN)
+ setbits32(&mpc8xx_immr->im_cpm.cp_peodr, pin);
+ else
+ clrbits32(&mpc8xx_immr->im_cpm.cp_peodr, pin);
+ }
+}
+
+static void cpm1_set_pin16(int port, int pin, int flags)
+{
+ struct cpm_ioport16 __iomem *iop =
+ (struct cpm_ioport16 __iomem *)&mpc8xx_immr->im_ioport;
+
+ pin = 1 << (15 - pin);
+
+ if (port != 0)
+ iop += port - 1;
+
+ if (flags & CPM_PIN_OUTPUT)
+ setbits16(&iop->dir, pin);
+ else
+ clrbits16(&iop->dir, pin);
+
+ if (!(flags & CPM_PIN_GPIO))
+ setbits16(&iop->par, pin);
+ else
+ clrbits16(&iop->par, pin);
+
+ if (port == CPM_PORTC) {
+ if (flags & CPM_PIN_SECONDARY)
+ setbits16(&iop->sor, pin);
+ else
+ clrbits16(&iop->sor, pin);
+ }
+}
+
+void cpm1_set_pin(enum cpm_port port, int pin, int flags)
+{
+ if (port == CPM_PORTB || port == CPM_PORTE)
+ cpm1_set_pin32(port, pin, flags);
+ else
+ cpm1_set_pin16(port, pin, flags);
+}
+
+int cpm1_clk_setup(enum cpm_clk_target target, int clock, int mode)
+{
+ int shift;
+ int i, bits = 0;
+ u32 __iomem *reg;
+ u32 mask = 7;
+
+ u8 clk_map[][3] = {
+ {CPM_CLK_SCC1, CPM_BRG1, 0},
+ {CPM_CLK_SCC1, CPM_BRG2, 1},
+ {CPM_CLK_SCC1, CPM_BRG3, 2},
+ {CPM_CLK_SCC1, CPM_BRG4, 3},
+ {CPM_CLK_SCC1, CPM_CLK1, 4},
+ {CPM_CLK_SCC1, CPM_CLK2, 5},
+ {CPM_CLK_SCC1, CPM_CLK3, 6},
+ {CPM_CLK_SCC1, CPM_CLK4, 7},
+
+ {CPM_CLK_SCC2, CPM_BRG1, 0},
+ {CPM_CLK_SCC2, CPM_BRG2, 1},
+ {CPM_CLK_SCC2, CPM_BRG3, 2},
+ {CPM_CLK_SCC2, CPM_BRG4, 3},
+ {CPM_CLK_SCC2, CPM_CLK1, 4},
+ {CPM_CLK_SCC2, CPM_CLK2, 5},
+ {CPM_CLK_SCC2, CPM_CLK3, 6},
+ {CPM_CLK_SCC2, CPM_CLK4, 7},
+
+ {CPM_CLK_SCC3, CPM_BRG1, 0},
+ {CPM_CLK_SCC3, CPM_BRG2, 1},
+ {CPM_CLK_SCC3, CPM_BRG3, 2},
+ {CPM_CLK_SCC3, CPM_BRG4, 3},
+ {CPM_CLK_SCC3, CPM_CLK5, 4},
+ {CPM_CLK_SCC3, CPM_CLK6, 5},
+ {CPM_CLK_SCC3, CPM_CLK7, 6},
+ {CPM_CLK_SCC3, CPM_CLK8, 7},
+
+ {CPM_CLK_SCC4, CPM_BRG1, 0},
+ {CPM_CLK_SCC4, CPM_BRG2, 1},
+ {CPM_CLK_SCC4, CPM_BRG3, 2},
+ {CPM_CLK_SCC4, CPM_BRG4, 3},
+ {CPM_CLK_SCC4, CPM_CLK5, 4},
+ {CPM_CLK_SCC4, CPM_CLK6, 5},
+ {CPM_CLK_SCC4, CPM_CLK7, 6},
+ {CPM_CLK_SCC4, CPM_CLK8, 7},
+
+ {CPM_CLK_SMC1, CPM_BRG1, 0},
+ {CPM_CLK_SMC1, CPM_BRG2, 1},
+ {CPM_CLK_SMC1, CPM_BRG3, 2},
+ {CPM_CLK_SMC1, CPM_BRG4, 3},
+ {CPM_CLK_SMC1, CPM_CLK1, 4},
+ {CPM_CLK_SMC1, CPM_CLK2, 5},
+ {CPM_CLK_SMC1, CPM_CLK3, 6},
+ {CPM_CLK_SMC1, CPM_CLK4, 7},
+
+ {CPM_CLK_SMC2, CPM_BRG1, 0},
+ {CPM_CLK_SMC2, CPM_BRG2, 1},
+ {CPM_CLK_SMC2, CPM_BRG3, 2},
+ {CPM_CLK_SMC2, CPM_BRG4, 3},
+ {CPM_CLK_SMC2, CPM_CLK5, 4},
+ {CPM_CLK_SMC2, CPM_CLK6, 5},
+ {CPM_CLK_SMC2, CPM_CLK7, 6},
+ {CPM_CLK_SMC2, CPM_CLK8, 7},
+ };
+
+ switch (target) {
+ case CPM_CLK_SCC1:
+ reg = &mpc8xx_immr->im_cpm.cp_sicr;
+ shift = 0;
+ break;
+
+ case CPM_CLK_SCC2:
+ reg = &mpc8xx_immr->im_cpm.cp_sicr;
+ shift = 8;
+ break;
+
+ case CPM_CLK_SCC3:
+ reg = &mpc8xx_immr->im_cpm.cp_sicr;
+ shift = 16;
+ break;
+
+ case CPM_CLK_SCC4:
+ reg = &mpc8xx_immr->im_cpm.cp_sicr;
+ shift = 24;
+ break;
+
+ case CPM_CLK_SMC1:
+ reg = &mpc8xx_immr->im_cpm.cp_simode;
+ shift = 12;
+ break;
+
+ case CPM_CLK_SMC2:
+ reg = &mpc8xx_immr->im_cpm.cp_simode;
+ shift = 28;
+ break;
+
+ default:
+ printk(KERN_ERR "cpm1_clock_setup: invalid clock target\n");
+ return -EINVAL;
+ }
+
+ if (reg == &mpc8xx_immr->im_cpm.cp_sicr && mode == CPM_CLK_RX)
+ shift += 3;
+
+ for (i = 0; i < ARRAY_SIZE(clk_map); i++) {
+ if (clk_map[i][0] == target && clk_map[i][1] == clock) {
+ bits = clk_map[i][2];
+ break;
+ }
+ }
+
+ if (i == ARRAY_SIZE(clk_map)) {
+ printk(KERN_ERR "cpm1_clock_setup: invalid clock combination\n");
+ return -EINVAL;
+ }
+
+ bits <<= shift;
+ mask <<= shift;
+ out_be32(reg, (in_be32(reg) & ~mask) | bits);
+
+ return 0;
+}
diff --git a/include/asm-powerpc/commproc.h b/include/asm-powerpc/commproc.h
index 86fcf26..5dec324 100644
--- a/include/asm-powerpc/commproc.h
+++ b/include/asm-powerpc/commproc.h
@@ -691,4 +691,53 @@ extern void cpm_free_handler(int vec);
#define IMAP_ADDR (get_immrbase())
+#define CPM_PIN_INPUT 0
+#define CPM_PIN_OUTPUT 1
+#define CPM_PIN_PRIMARY 0
+#define CPM_PIN_SECONDARY 2
+#define CPM_PIN_GPIO 4
+#define CPM_PIN_OPENDRAIN 8
+
+enum cpm_port {
+ CPM_PORTA,
+ CPM_PORTB,
+ CPM_PORTC,
+ CPM_PORTD,
+ CPM_PORTE,
+};
+
+void cpm1_set_pin(enum cpm_port port, int pin, int flags);
+
+enum cpm_clk_dir {
+ CPM_CLK_RX,
+ CPM_CLK_TX,
+ CPM_CLK_RTX
+};
+
+enum cpm_clk_target {
+ CPM_CLK_SCC1,
+ CPM_CLK_SCC2,
+ CPM_CLK_SCC3,
+ CPM_CLK_SCC4,
+ CPM_CLK_SMC1,
+ CPM_CLK_SMC2,
+};
+
+enum cpm_clk {
+ CPM_BRG1, /* Baud Rate Generator 1 */
+ CPM_BRG2, /* Baud Rate Generator 2 */
+ CPM_BRG3, /* Baud Rate Generator 3 */
+ CPM_BRG4, /* Baud Rate Generator 4 */
+ CPM_CLK1, /* Clock 1 */
+ CPM_CLK2, /* Clock 2 */
+ CPM_CLK3, /* Clock 3 */
+ CPM_CLK4, /* Clock 4 */
+ CPM_CLK5, /* Clock 5 */
+ CPM_CLK6, /* Clock 6 */
+ CPM_CLK7, /* Clock 7 */
+ CPM_CLK8, /* Clock 8 */
+};
+
+int cpm1_clk_setup(enum cpm_clk_target target, int clock, int mode);
+
#endif /* __CPM_8XX__ */
--
1.5.3.1
More information about the Linuxppc-dev
mailing list