[RFC] [PATCH] PowerPC: Workaround for the 440EP(x)/GR(x) processors identical PVR issue.

[Valentine Barshak]

Benjamin Herrenschmidt wrote:
> On Thu, 2007-10-25 at 22:16 +0400, Valentine Barshak wrote:
>> PowerPC 440EP(x) 440GR(x) processors have the same PVR values, since
>> they have identical cores. However, FPU is not supported on GR(x) and
>> enabling APU instruction broadcast in the CCR0 register (to enable FPU)
>> may cause unpredictable results. There's no safe way to detect FPU
>> support at runtime. This patch provides a workarund for the issue.
>> We use a POWER6 "logical PVR approach". First, we identify all EP(x)
>> and GR(x) processors as GR(x) ones (which is safe). Then we check 
>> the device tree cpu path. If we have a EP(x) processor entry,
>> we call identify_cpu again with PVR | 0x8. This bit is always 0
>> in the real PVR. This way we enable FPU only for 440EP(x).
>>
>> Signed-off-by: Valentine Barshak <vbarshak at ru.mvista.com>
> 
> Why not just or-in the FPU feature bit ?
> 
> Ben.
> 
> 

It's not enough. We need to enable APU instruction broadcast for EP(x) 
(call __init_fpu_44x in arch/powerpc/kernel/cpu_setup_44x.S).
Or do you suggest to or-in FPU feature bit and enable APUIB later, not 
in the cpu_setup callback?
Thanks,
Valentine.