[PATCH 1/2] powerpc: prpmc2800 - Add MTD support

Mark A. Greer mgreer at mvista.com
Fri Oct 26 09:39:48 EST 2007


From: Mark A. Greer <mgreer at mvista.com>

Create necessary device nodes so that the MTD subsystem recognizes
the MTD entries in the prpmc2800's DTS file.  Also bring MTD section
of the prpmc2800's DTS file up to the current DTS specification.

Signed-off-by: Mark A. Greer <mgreer at mvista.com>
---
 arch/powerpc/boot/dts/prpmc2800.dts            |   39 +++++++++++----
 arch/powerpc/platforms/embedded6xx/prpmc2800.c |   13 +++++
 2 files changed, 42 insertions(+), 10 deletions(-)

diff --git a/arch/powerpc/boot/dts/prpmc2800.dts b/arch/powerpc/boot/dts/prpmc2800.dts
index 297dfa5..50fc0a7 100644
--- a/arch/powerpc/boot/dts/prpmc2800.dts
+++ b/arch/powerpc/boot/dts/prpmc2800.dts
@@ -55,17 +55,36 @@
 			  f2000000 f2000000 00040000>;	/* Integrated SRAM */
 
 		flash at a0000000 {
-			device_type = "rom";
-			compatible = "direct-mapped";
-			reg = <a0000000 4000000>; /* Default (64MB) */
-			probe-type = "CFI";
+			compatible = "cfi-flash";
+			reg = <a0000000 04000000>;
 			bank-width = <4>;
-			partitions = <00000000 00100000 /* RO */
-				      00100000 00040001 /* RW */
-				      00140000 00400000 /* RO */
-				      00540000 039c0000 /* RO */
-				      03f00000 00100000>; /* RO */
-			partition-names = "FW Image A", "FW Config Data", "Kernel Image", "Filesystem", "FW Image B";
+			device-width = <2>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			fw at 0 {
+				label = "FW Image A";
+				reg = <00000000 00100000>;
+				read-only;
+			};
+			cfg at 100000 {
+				label = "FW Config Data";	/* RW */
+				reg = <00100000 00040000>;
+			};
+			kernel at 140000 {
+				label = "Kernel Image";
+				reg = <00140000 00400000>;
+				read-only;
+			};
+			fs at 540000 {
+				label = "Filesystem";
+				reg = <00540000 039c0000>;
+				read-only;
+			};
+			fw at 3f00000 {
+				label = "FW Image B";
+				reg = <03f00000 00100000>;
+				read-only;
+			};
 		};
 
 		mdio {
diff --git a/arch/powerpc/platforms/embedded6xx/prpmc2800.c b/arch/powerpc/platforms/embedded6xx/prpmc2800.c
index e484cac..a356a19 100644
--- a/arch/powerpc/platforms/embedded6xx/prpmc2800.c
+++ b/arch/powerpc/platforms/embedded6xx/prpmc2800.c
@@ -14,6 +14,7 @@
 #include <linux/delay.h>
 #include <linux/interrupt.h>
 #include <linux/seq_file.h>
+#include <linux/of_platform.h>
 
 #include <asm/machdep.h>
 #include <asm/prom.h>
@@ -68,6 +69,18 @@ static void __init prpmc2800_setup_arch(void)
 	printk("Motorola %s\n", prpmc2800_platform_name);
 }
 
+static int __init prpmc2800_register_mtd(void)
+{
+	struct device_node *np = NULL;
+
+	while ((np = of_find_compatible_node(np, NULL, "cfi-flash")) != NULL)
+		of_platform_device_create(np, NULL, NULL);
+
+	of_node_put(np);
+	return 0;
+}
+device_initcall(prpmc2800_register_mtd);
+
 static void prpmc2800_reset_board(void)
 {
 	u32 temp;



More information about the Linuxppc-dev mailing list