Ocotea board?

[Benjamin Herrenschmidt]

On Tue, 2007-10-23 at 11:13 -0700, Jeff Mock wrote:
> Is the Ocotea board (the original 440GX eval board) still interesting? 
> I'm wrapping up a project using the 440GX, I started out hacking on the 
> Ocotea board to get started, but we moved off Ocotea long ago onto our 
> own hardware.
> 
> I'm cleaning up the lab now that the project is nearly finished and I 
> would like to give the board to someone that will put it to good use. 
> I've sponged off this mailing list quite a lot, it's about time I give a 
> little something back.

Well, the ocotea has an interesting "feature" related to the way the
ethernet PHY an EMAC interact which I haven't dealt with in the new EMAC
driver at this stage.

I -think- the Taishan I have may have the same issue though, in which
case I won't need it, but if not, I could have good use (or Josh in
Rochester) for one of these.

> The board has been hacked a little bit but still works fine.  I just 
> powered it up and it happily booted Linux via TFTP.  The boot ROM now 
> has u-boot, the original PIBs (or whatever) is long gone. All I ask is 
> that you're self-sufficient and don't bug me too much about it...
> 
> Can someone recommend a good home?  Otherwise it will wind up in 
> storeroom purgatory.
> 
> jeff
> 
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev at ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-dev