[PATCH v7 3/9] add Freescale SerDes PHY support
Grant Likely
grant.likely at secretlab.ca
Sat Oct 20 01:35:45 EST 2007
On 10/19/07, Li Yang <leoli at freescale.com> wrote:
> The SerDes(serializer/deserializer) PHY block is a new SoC block used
> in Freescale chips to support multiple serial interfaces, such as PCI
> Express, SGMII, SATA.
This looks like board setup behaviour. Shouldn't setting this up be
the responsibility firmware? And failing that, I think it should be
done directly by the platform setup function (in other words; make it
a helper function and call it at board setup time). Besides, you want
to provide guarantees that the board is setup correctly before the
device driver that uses it gets probed.
Cheers,
g.
>
> Signed-off-by: Li Yang <leoli at freescale.com>
> ---
> arch/powerpc/platforms/Kconfig | 7 ++
> arch/powerpc/sysdev/Makefile | 1 +
> arch/powerpc/sysdev/fsl_serdes.c | 195 ++++++++++++++++++++++++++++++++++++++
> 3 files changed, 203 insertions(+), 0 deletions(-)
> create mode 100644 arch/powerpc/sysdev/fsl_serdes.c
>
> diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
> index 229d355..5d64f84 100644
> --- a/arch/powerpc/platforms/Kconfig
> +++ b/arch/powerpc/platforms/Kconfig
> @@ -315,6 +315,13 @@ config FSL_ULI1575
> config CPM
> bool
>
> +config FSL_SERDES
> + bool
> + help
> + The SerDes(serializer/deserializer) PHY block is a new SoC block
> + used in Freescale chips to support multiple serial interfaces,
> + such as PCI Express, SGMII, SATA.
> +
> source "arch/powerpc/sysdev/bestcomm/Kconfig"
>
> endmenu
> diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile
> index 99a77d7..2343ea4 100644
> --- a/arch/powerpc/sysdev/Makefile
> +++ b/arch/powerpc/sysdev/Makefile
> @@ -20,6 +20,7 @@ obj-$(CONFIG_MV64X60) += $(mv64x60-y) mv64x60_pic.o mv64x60_dev.o \
> mv64x60_udbg.o
> obj-$(CONFIG_RTC_DRV_CMOS) += rtc_cmos_setup.o
> obj-$(CONFIG_AXON_RAM) += axonram.o
> +obj-$(CONFIG_FSL_SERDES) += fsl_serdes.o
>
> ifeq ($(CONFIG_PPC_MERGE),y)
> obj-$(CONFIG_PPC_INDIRECT_PCI) += indirect_pci.o
> diff --git a/arch/powerpc/sysdev/fsl_serdes.c b/arch/powerpc/sysdev/fsl_serdes.c
> new file mode 100644
> index 0000000..670015d
> --- /dev/null
> +++ b/arch/powerpc/sysdev/fsl_serdes.c
> @@ -0,0 +1,195 @@
> +/*
> + * arch/powerpc/sysdev/fsl_serdes.c
> + *
> + * Copyright (C) 2007 Freescale Semiconductor, Inc. All rights reserved.
> + *
> + * Author: Li Yang <leoli at freescale.com>
> + *
> + * Freescale SerDes initialization routines
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License as published by the
> + * Free Software Foundation; either version 2 of the License, or (at your
> + * option) any later version.
> + */
> +
> +#include <linux/stddef.h>
> +#include <linux/kernel.h>
> +#include <linux/init.h>
> +#include <linux/errno.h>
> +#include <linux/delay.h>
> +#include <linux/of.h>
> +#include <linux/of_platform.h>
> +
> +#include <asm/system.h>
> +#include <asm/io.h>
> +#include <asm/machdep.h>
> +
> +#define FSL_SRDSCR0_OFFS 0x0
> +#define FSL_SRDSCR0_DPP_1V2 0x00008800
> +#define FSL_SRDSCR1_OFFS 0x4
> +#define FSL_SRDSCR1_PLLBW 0x00000040
> +#define FSL_SRDSCR2_OFFS 0x8
> +#define FSL_SRDSCR2_VDD_1V2 0x00800000
> +#define FSL_SRDSCR2_SEIC_MASK 0x00001c1c
> +#define FSL_SRDSCR2_SEIC_SATA 0x00001414
> +#define FSL_SRDSCR2_SEIC_PEX 0x00001010
> +#define FSL_SRDSCR2_SEIC_SGMII 0x00000101
> +#define FSL_SRDSCR3_OFFS 0xc
> +#define FSL_SRDSCR3_KFR_SATA 0x10100000
> +#define FSL_SRDSCR3_KPH_SATA 0x04040000
> +#define FSL_SRDSCR3_SDFM_SATA_PEX 0x01010000
> +#define FSL_SRDSCR3_SDTXL_SATA 0x00000505
> +#define FSL_SRDSCR4_OFFS 0x10
> +#define FSL_SRDSCR4_PROT_SATA 0x00000808
> +#define FSL_SRDSCR4_PROT_PEX 0x00000101
> +#define FSL_SRDSCR4_PROT_SGMII 0x00000505
> +#define FSL_SRDSCR4_PLANE_X2 0x01000000
> +#define FSL_SRDSCR4_RFCKS_100 0x00000000
> +#define FSL_SRDSCR4_RFCKS_125 0x10000000
> +#define FSL_SRDSCR4_RFCKS_150 0x30000000
> +#define FSL_SRDSRSTCTL_OFFS 0x20
> +#define FSL_SRDSRSTCTL_RST 0x80000000
> +#define FSL_SRDSRSTCTL_SATA_RESET 0xf
> +
> +static int fsl_serdes_probe(struct of_device *ofdev,
> + const struct of_device_id *match)
> +{
> + struct device_node *np = ofdev->node;
> + void __iomem *regs;
> + const char *prot;
> + const unsigned int *freq;
> + u32 rfcks;
> +
> + regs = of_iomap(np, 0);
> + if (!regs)
> + return -ENOMEM;
> +
> + prot = of_get_property(np, "protocol", NULL);
> + if (!prot)
> + goto out;
> + freq = of_get_property(np, "clock", NULL);
> + if (!freq)
> + goto out;
> + switch (*freq) {
> + case 100:
> + rfcks = FSL_SRDSCR4_RFCKS_100;
> + break;
> + case 125:
> + rfcks = FSL_SRDSCR4_RFCKS_125;
> + break;
> + case 150:
> + rfcks = FSL_SRDSCR4_RFCKS_150;
> + break;
> + default:
> + printk(KERN_ERR "SerDes: Wrong frequency\n");
> + goto out;
> + }
> +
> + /* Use default prescale and counter */
> +
> + /* 1.0V corevdd */
> + if (of_get_property(np, "vdd-1v", NULL)) {
> + /* DPPE/DPPA = 0 */
> + clrbits32(regs + FSL_SRDSCR0_OFFS, FSL_SRDSCR0_DPP_1V2);
> +
> + /* VDD = 0 */
> + clrbits32(regs + FSL_SRDSCR2_OFFS, FSL_SRDSCR2_VDD_1V2);
> + }
> +
> + /* protocol specific configuration */
> + if (!strcmp(prot, "sata")) {
> + /* Set and clear reset bits */
> + setbits32(regs + FSL_SRDSRSTCTL_OFFS,
> + FSL_SRDSRSTCTL_SATA_RESET);
> + mdelay(1);
> + clrbits32(regs + FSL_SRDSRSTCTL_OFFS,
> + FSL_SRDSRSTCTL_SATA_RESET);
> +
> + /* Configure SRDSCR1 */
> + clrbits32(regs + FSL_SRDSCR1_OFFS, FSL_SRDSCR1_PLLBW);
> +
> + /* Configure SRDSCR2 */
> + clrsetbits_be32(regs + FSL_SRDSCR2_OFFS,
> + FSL_SRDSCR2_SEIC_MASK, FSL_SRDSCR2_SEIC_SATA);
> +
> + /* Configure SRDSCR3 */
> + out_be32(regs + FSL_SRDSCR3_OFFS, FSL_SRDSCR3_KFR_SATA |
> + FSL_SRDSCR3_KPH_SATA |
> + FSL_SRDSCR3_SDFM_SATA_PEX |
> + FSL_SRDSCR3_SDTXL_SATA);
> +
> + /* Configure SRDSCR4 */
> + out_be32(regs + FSL_SRDSCR4_OFFS, rfcks |
> + FSL_SRDSCR4_PROT_SATA);
> +
> + } else if (!strcmp(prot, "pcie")) {
> + /* Configure SRDSCR1 */
> + setbits32(regs + FSL_SRDSCR1_OFFS, FSL_SRDSCR1_PLLBW);
> +
> + /* Configure SRDSCR2 */
> + clrsetbits_be32(regs + FSL_SRDSCR2_OFFS, FSL_SRDSCR2_SEIC_MASK,
> + FSL_SRDSCR2_SEIC_PEX);
> +
> + /* Configure SRDSCR3 */
> + out_be32(regs + FSL_SRDSCR3_OFFS, FSL_SRDSCR3_SDFM_SATA_PEX);
> +
> + /* Configure SRDSCR4 */
> + if (of_get_property(np, "pcie-x2", NULL))
> + out_be32(regs + FSL_SRDSCR4_OFFS, rfcks |
> + FSL_SRDSCR4_PROT_PEX | FSL_SRDSCR4_PLANE_X2);
> + else
> + out_be32(regs + FSL_SRDSCR4_OFFS, rfcks |
> + FSL_SRDSCR4_PROT_PEX);
> +
> + } else if (!strcmp(prot, "sgmii")) {
> + /* Configure SRDSCR1 */
> + clrbits32(regs + FSL_SRDSCR1_OFFS, FSL_SRDSCR1_PLLBW);
> +
> + /* Configure SRDSCR2 */
> + clrsetbits_be32(regs + FSL_SRDSCR2_OFFS, FSL_SRDSCR2_SEIC_MASK,
> + FSL_SRDSCR2_SEIC_SGMII);
> +
> + /* Configure SRDSCR3 */
> + out_be32(regs + FSL_SRDSCR3_OFFS, 0);
> +
> + /* Configure SRDSCR4 */
> + out_be32(regs + FSL_SRDSCR4_OFFS, rfcks |
> + FSL_SRDSCR4_PROT_SGMII);
> +
> + } else {
> + printk(KERN_ERR "SerDes: Wrong protocol\n");
> + goto out;
> + }
> +
> + /* Do a software reset */
> + setbits32(regs + FSL_SRDSRSTCTL_OFFS, FSL_SRDSRSTCTL_RST);
> + iounmap(regs);
> +
> + dev_printk(KERN_INFO, &ofdev->dev, "Initialized as %s\n", prot);
> +
> + return 0;
> +out:
> + iounmap(regs);
> + return -EINVAL;
> +}
> +
> +static struct of_device_id fsl_serdes_match[] = {
> + {
> + .compatible = "fsl,serdes",
> + },
> + {},
> +};
> +
> +static struct of_platform_driver fsl_serdes_driver = {
> + .name = "fsl-serdes",
> + .match_table = fsl_serdes_match,
> + .probe = fsl_serdes_probe,
> +};
> +
> +static int __init fsl_serdes_init(void)
> +{
> + of_register_platform_driver(&fsl_serdes_driver);
> + return 0;
> +}
> +device_initcall(fsl_serdes_init);
> --
> 1.5.3.2.104.g41ef
>
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev at ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-dev
>
--
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.
grant.likely at secretlab.ca
(403) 399-0195
More information about the Linuxppc-dev
mailing list