[PATCH v2] Device tree bindings for Xilinx devices

[Grant Likely]

From: Grant Likely <grant.likely at secretlab.ca>

Here's my second version of xilinx device tree bindings.  Please review
and comment.  I'd like to push these out to Paulus in the next couple
of days.

Cheers,
g.

Signed-off-by: Grant Likely <grant.likely at secretlab.ca>
---

 Documentation/powerpc/booting-without-of.txt |   55 ++++++++++++++++++++++++++
 1 files changed, 55 insertions(+), 0 deletions(-)

diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt
index 7a6c5f2..21afaea 100644
--- a/Documentation/powerpc/booting-without-of.txt
+++ b/Documentation/powerpc/booting-without-of.txt
@@ -2089,6 +2089,61 @@ platforms are moved over to use the flattened-device-tree model.
 
    More devices will be defined as this spec matures.
 
+   l) Xilinx ML300 Framebuffer
+
+   Simple framebuffer device from the ML300 reference design (also on the
+   ML403 reference design as well as others).
+
+   Required properties:
+    - compatible : Must include "xilinx,ml300-fb"
+    - reg : offset and length of the framebuffer register set
+
+   Optional properties:
+    - resolution : <xres yres> pixel resolution of framebuffer.  Some
+                   implementations use a different resolution.  Default
+                   is <d#640 d#480>
+    - virt-resolution : <xvirt yvirt> Size of framebuffer in memory.
+                        Default is <d#1024 d#480>.
+    - rotate-display (empty) : rotate display 180 degrees.
+
+   m) Xilinx SystemACE
+
+   The Xilinx SystemACE device is used to program FPGAs from an FPGA
+   bitstream stored on a CF card.  It can also be used as a generic CF
+   interface device.
+
+   Required properties:
+    - compatible : Must include "xilinx,sysace"
+    - reg : offset and length of SystemACE register set
+
+   Recommended properties:
+    - interrupt-parent, interrupts : Connection of device irq signal.
+
+   Optional properties:
+    - 8-bit (empty) : Set this property if the SystemACE must be in 8 bit mode
+
+   n) Xilinx EMAC and Xilinx TEMAC
+
+   Xilinx Ethernet devices.  Uses common properties from other Ethernet
+   devices with the following constraints:
+   
+   Required properties:
+    - compatible : Must include one of: "xilinx,plb-temac",
+                   "xilinx,plb-emac", "xilinx-opb-emac"
+    - dma-mode : Must be one of "none", "simple", "sg" (sg == scatter gather)
+
+   o) Xilinx Uartlite
+
+   Xilinx uartlite devices are simple fixed speed serial ports.  Uartlite
+   ports should be described in a node with the following properties.
+
+   Requred properties:
+    - compatible : Must include "xilinx,uartlite"
+    - reg : offset and length of uartlite register set
+
+    Recommended properties:
+    - interrupt-parent, interrupts : Connection of device irq signal.
+
 VII - Specifying interrupt information for devices
 ===================================================