[PATCH] Device tree bindings for Xilinx devices

[Grant Likely]

On 10/10/07, David Gibson <dwg at au1.ibm.com> wrote:
> On Wed, Oct 10, 2007 at 10:18:50PM -0600, Grant Likely wrote:
> > On 10/10/07, David Gibson <dwg at au1.ibm.com> wrote:
> > > On Wed, Oct 10, 2007 at 08:25:36PM -0600, Grant Likely wrote:
> > > > On 10/10/07, David Gibson <dwg at au1.ibm.com> wrote:
> > > > > We've used 'cell-index' for similar purposes on other 4xx.
> > > >
> > > > Unfortunately, 'cell' has been used in the sense of a logic cell in an
> > > > SoC.  In the case of the SystemACE, it is an external chip.
> > > >
> > > > What about "device-number"?
> > >
> > > Ok, I misunderstood.  If it's not on chip, what significance does this
> > > serial number have?  Where would a driver need it?
> >
> > If there were 2 systemace devices on board; one attached to a CF slot
> > labeled "1" and the other to one labeled "2".  :-)  Same problem as
> > lining up serial device files to physical port numbers.
> >
> > The driver doesn't technically need it, but the information does need
> > to flow through to the creation of logically numbered device files.
>
> Ah.  Then, I'm afraid it doesn't belong in the core binding.
>
> Preferably, you should just figure out something without help of this
> property - plenty of other things have to figure out device names
> without assistance like this.

I'm not too stuck on the method used, but I do think it is appropriate
to encode this kind of data in the device tree in some form...
However, for this particular device I'm probably just borrowing
trouble.  I'll drop the property.

My main concern is that I don't like the implicit numbering that
occurs simply based on the order of devices in the device tree.  If
the probe algorithm ever changes to parse in reverse order or
something reorders the tree, then the device numbers also change.  :-(

I'd rather be explicit.  In fact I've already been bitten by this
where the mpc5200 has 6 PSC, each of which can be configured as a
serial port.  However, I've got access to 3 different boards; each of
which has the logical port numbers 100% unrelated to the 'cell'
number.

> If you really must you could do this in analogy with the
> "linux,network-index" property - but this would be, as that is, an
> ugly hack, and should be recognized as such
>
> Segher's suggestion of using OF-style aliases for this is a fairly
> good one, actually.  I just need to get to implementing it...

/me needs to look up what that look like and how I would use it.  My
knowledge of OF is sadly lacking.

Cheers,
g.

-- 
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.
grant.likely at secretlab.ca
(403) 399-0195