[PATCH 2/3] [POWERPC] Add AMCC Kilauea eval board support to platforms/40x

[Josh Boyer]

On Mon, 2007-10-08 at 11:08 +0200, Stefan Roese wrote:
> This patch adds basic support for the new 405EX and the AMCC eval board
> Kilauea to arch/powerpc.
> 
> Signed-off-by: Stefan Roese <sr at denx.de>
> ---
>  arch/powerpc/platforms/40x/Kconfig   |   17 +++++++--
>  arch/powerpc/platforms/40x/Makefile  |    5 ++-
>  arch/powerpc/platforms/40x/kilauea.c |   63 ++++++++++++++++++++++++++++++++++
>  3 files changed, 80 insertions(+), 5 deletions(-)
>  create mode 100644 arch/powerpc/platforms/40x/kilauea.c
> 
> diff --git a/arch/powerpc/platforms/40x/Kconfig b/arch/powerpc/platforms/40x/Kconfig
> index a0a50b1..da8d02d 100644
> --- a/arch/powerpc/platforms/40x/Kconfig
> +++ b/arch/powerpc/platforms/40x/Kconfig
> @@ -29,6 +29,14 @@
>  #	help
>  #	  This option enables support for the extra features of the EP405PC board.
> 
> +config KILAUEA
> +	bool "Kilauea"
> +	depends on 40x
> +	default y

I think we decided to say default n here.  I need to fix the Walnut
example, I know.

> +	select 405EX
> +	help
> +	  This option enables support for the AMCC PPC405EX evaluation board.
> +
>  #config REDWOOD_5
>  #	bool "Redwood-5"
>  #	depends on 40x
> @@ -89,14 +97,17 @@ config 403GCX
>  	#depends on OAK
>  	select IBM405_ERR51
> 
> +config 405EP
> +	bool
> +
> +config 405EX
> +	bool
> +
>  config 405GP
>  	bool
>  	select IBM405_ERR77
>  	select IBM405_ERR51
> 
> -config 405EP
> -	bool
> -
>  config 405GPR
>  	bool
> 
> diff --git a/arch/powerpc/platforms/40x/Makefile b/arch/powerpc/platforms/40x/Makefile
> index 0a3cfe9..51dadee 100644
> --- a/arch/powerpc/platforms/40x/Makefile
> +++ b/arch/powerpc/platforms/40x/Makefile
> @@ -1,2 +1,3 @@
> -obj-$(CONFIG_WALNUT) += walnut.o
> -obj-$(CONFIG_XILINX_VIRTEX_GENERIC_BOARD) += virtex.o
> +obj-$(CONFIG_KILAUEA)				+= kilauea.o
> +obj-$(CONFIG_WALNUT)				+= walnut.o
> +obj-$(CONFIG_XILINX_VIRTEX_GENERIC_BOARD)	+= virtex.o
> diff --git a/arch/powerpc/platforms/40x/kilauea.c b/arch/powerpc/platforms/40x/kilauea.c
> new file mode 100644
> index 0000000..6cbd528
> --- /dev/null
> +++ b/arch/powerpc/platforms/40x/kilauea.c
> @@ -0,0 +1,63 @@
> +/*
> + * Kilauea board specific routines
> + *
> + * Copyright 2007 DENX Software Engineering, Stefan Roese <sr at denx.de>
> + *
> + * Based on the Walnut code by
> + * Josh Boyer <jwboyer at linux.vnet.ibm.com>
> + * Copyright 2007 IBM Corporation
> + *
> + * This program is free software; you can redistribute  it and/or modify it
> + * under  the terms of  the GNU General  Public License as published by the
> + * Free Software Foundation;  either version 2 of the  License, or (at your
> + * option) any later version.
> + */
> +#include <linux/init.h>
> +#include <asm/machdep.h>
> +#include <asm/prom.h>
> +#include <asm/udbg.h>
> +#include <asm/time.h>
> +#include <asm/uic.h>
> +#include <asm/of_platform.h>
> +
> +static struct of_device_id kilauea_of_bus[] = {
> +	{ .compatible = "ibm,plb4", },
> +	{ .compatible = "ibm,opb", },
> +	{ .compatible = "ibm,ebc", },
> +	{},
> +};
> +
> +static int __init kilauea_device_probe(void)
> +{
> +	if (!machine_is(kilauea))
> +		return 0;
> +
> +	of_platform_bus_probe(NULL, kilauea_of_bus, NULL);
> +
> +	return 0;
> +}
> +device_initcall(kilauea_device_probe);
> +
> +static int __init kilauea_probe(void)
> +{
> +	unsigned long root = of_get_flat_dt_root();
> +
> +	if (!of_flat_dt_is_compatible(root, "amcc,kilauea"))
> +		return 0;
> +
> +	return 1;
> +}
> +
> +static void __init kilauea_setup_arch(void)
> +{
> +}

Assuming Grant's patch to make setup_arch optional gets applied, this
can go too.

> +
> +define_machine(kilauea) {
> +	.name 				= "Kilauea",
> +	.probe 				= kilauea_probe,
> +	.setup_arch			= kilauea_setup_arch,
> +	.progress 			= udbg_progress,
> +	.init_IRQ 			= uic_init_tree,
> +	.get_irq 			= uic_get_irq,
> +	.calibrate_decr			= generic_calibrate_decr,
> +};

Other than those two comments, looks good.

josh