[PATCH] drivers/ata: add support to Freescale 3.0Gbps SATA Controller

[Kumar Gala]

On Wed, 10 Oct 2007, Li Yang wrote:

> From: Ashish Kalra <ashish.kalra at freescale.com>
>
> This patch adds support for Freescale 3.0Gbps SATA Controller supporting
> Native Command Queueing(NCQ), device hotplug, and ATAPI.  This controller
> can be found on MPC8315 and MPC8378.
>
> Signed-off-by: Ashish Kalra <ashish.kalra at freescale.com>
> Signed-off-by: Li Yang <leoli at freescale.com>
> ---
>  drivers/ata/Kconfig    |    9 +
>  drivers/ata/Makefile   |    1 +
>  drivers/ata/sata_fsl.c | 1505 ++++++++++++++++++++++++++++++++++++++++++++++++
>  drivers/ata/sata_fsl.h |  104 ++++
>  4 files changed, 1619 insertions(+), 0 deletions(-)
>  create mode 100644 drivers/ata/sata_fsl.c
>  create mode 100644 drivers/ata/sata_fsl.h

This patch shouldn't be accepted until we close on the device tree
definition since it impacts the driver.

Also CONFIG_SATA_FSL_FPGA_PCI should be removed since that was just an
internal debug thing.

- k