[PATCH] Lite5200: Use comma delimiter format for lists in device tree
Grant Likely
grant.likely at secretlab.ca
Mon Oct 8 17:24:22 EST 2007
From: Grant Likely <grant.likely at secretlab.ca>
DTC now supports "foo","bar" format for lists of strings; use the new
format on the lite5200 device trees.
Signed-off-by: Grant Likely <grant.likely at secretlab.ca>
---
arch/powerpc/boot/dts/lite5200.dts | 10 +++---
arch/powerpc/boot/dts/lite5200b.dts | 62 ++++++++++++++++++-----------------
2 files changed, 36 insertions(+), 36 deletions(-)
diff --git a/arch/powerpc/boot/dts/lite5200.dts b/arch/powerpc/boot/dts/lite5200.dts
index 324e1bd..bc45f5f 100644
--- a/arch/powerpc/boot/dts/lite5200.dts
+++ b/arch/powerpc/boot/dts/lite5200.dts
@@ -19,7 +19,7 @@
/ {
model = "fsl,lite5200";
// revision = "1.0";
- compatible = "fsl,lite5200\0generic-mpc5200";
+ compatible = "fsl,lite5200","generic-mpc5200";
#address-cells = <1>;
#size-cells = <1>;
@@ -192,7 +192,7 @@
usb at 1000 {
device_type = "usb-ohci-be";
- compatible = "mpc5200-ohci\0ohci-be";
+ compatible = "mpc5200-ohci","ohci-be";
reg = <1000 ff>;
interrupts = <2 6 0>;
interrupt-parent = <&mpc5200_pic>;
@@ -293,7 +293,7 @@
i2c at 3d00 {
device_type = "i2c";
- compatible = "mpc5200-i2c\0fsl-i2c";
+ compatible = "mpc5200-i2c","fsl-i2c";
cell-index = <0>;
reg = <3d00 40>;
interrupts = <2 f 0>;
@@ -303,7 +303,7 @@
i2c at 3d40 {
device_type = "i2c";
- compatible = "mpc5200-i2c\0fsl-i2c";
+ compatible = "mpc5200-i2c","fsl-i2c";
cell-index = <1>;
reg = <3d40 40>;
interrupts = <2 10 0>;
@@ -312,7 +312,7 @@
};
sram at 8000 {
device_type = "sram";
- compatible = "mpc5200-sram\0sram";
+ compatible = "mpc5200-sram","sram";
reg = <8000 4000>;
};
};
diff --git a/arch/powerpc/boot/dts/lite5200b.dts b/arch/powerpc/boot/dts/lite5200b.dts
index 3f74f73..a6bb1d0 100644
--- a/arch/powerpc/boot/dts/lite5200b.dts
+++ b/arch/powerpc/boot/dts/lite5200b.dts
@@ -19,7 +19,7 @@
/ {
model = "fsl,lite5200b";
// revision = "1.0";
- compatible = "fsl,lite5200b\0generic-mpc5200";
+ compatible = "fsl,lite5200b","generic-mpc5200";
#address-cells = <1>;
#size-cells = <1>;
@@ -56,7 +56,7 @@
system-frequency = <0>; // from bootloader
cdm at 200 {
- compatible = "mpc5200b-cdm\0mpc5200-cdm";
+ compatible = "mpc5200b-cdm","mpc5200-cdm";
reg = <200 38>;
};
@@ -65,12 +65,12 @@
interrupt-controller;
#interrupt-cells = <3>;
device_type = "interrupt-controller";
- compatible = "mpc5200b-pic\0mpc5200-pic";
+ compatible = "mpc5200b-pic","mpc5200-pic";
reg = <500 80>;
};
gpt at 600 { // General Purpose Timer
- compatible = "mpc5200b-gpt\0mpc5200-gpt";
+ compatible = "mpc5200b-gpt","mpc5200-gpt";
device_type = "gpt";
cell-index = <0>;
reg = <600 10>;
@@ -80,7 +80,7 @@
};
gpt at 610 { // General Purpose Timer
- compatible = "mpc5200b-gpt\0mpc5200-gpt";
+ compatible = "mpc5200b-gpt","mpc5200-gpt";
device_type = "gpt";
cell-index = <1>;
reg = <610 10>;
@@ -89,7 +89,7 @@
};
gpt at 620 { // General Purpose Timer
- compatible = "mpc5200b-gpt\0mpc5200-gpt";
+ compatible = "mpc5200b-gpt","mpc5200-gpt";
device_type = "gpt";
cell-index = <2>;
reg = <620 10>;
@@ -98,7 +98,7 @@
};
gpt at 630 { // General Purpose Timer
- compatible = "mpc5200b-gpt\0mpc5200-gpt";
+ compatible = "mpc5200b-gpt","mpc5200-gpt";
device_type = "gpt";
cell-index = <3>;
reg = <630 10>;
@@ -107,7 +107,7 @@
};
gpt at 640 { // General Purpose Timer
- compatible = "mpc5200b-gpt\0mpc5200-gpt";
+ compatible = "mpc5200b-gpt","mpc5200-gpt";
device_type = "gpt";
cell-index = <4>;
reg = <640 10>;
@@ -116,7 +116,7 @@
};
gpt at 650 { // General Purpose Timer
- compatible = "mpc5200b-gpt\0mpc5200-gpt";
+ compatible = "mpc5200b-gpt","mpc5200-gpt";
device_type = "gpt";
cell-index = <5>;
reg = <650 10>;
@@ -125,7 +125,7 @@
};
gpt at 660 { // General Purpose Timer
- compatible = "mpc5200b-gpt\0mpc5200-gpt";
+ compatible = "mpc5200b-gpt","mpc5200-gpt";
device_type = "gpt";
cell-index = <6>;
reg = <660 10>;
@@ -134,7 +134,7 @@
};
gpt at 670 { // General Purpose Timer
- compatible = "mpc5200b-gpt\0mpc5200-gpt";
+ compatible = "mpc5200b-gpt","mpc5200-gpt";
device_type = "gpt";
cell-index = <7>;
reg = <670 10>;
@@ -143,7 +143,7 @@
};
rtc at 800 { // Real time clock
- compatible = "mpc5200b-rtc\0mpc5200-rtc";
+ compatible = "mpc5200b-rtc","mpc5200-rtc";
device_type = "rtc";
reg = <800 100>;
interrupts = <1 5 0 1 6 0>;
@@ -152,7 +152,7 @@
mscan at 900 {
device_type = "mscan";
- compatible = "mpc5200b-mscan\0mpc5200-mscan";
+ compatible = "mpc5200b-mscan","mpc5200-mscan";
cell-index = <0>;
interrupts = <2 11 0>;
interrupt-parent = <&mpc5200_pic>;
@@ -161,7 +161,7 @@
mscan at 980 {
device_type = "mscan";
- compatible = "mpc5200b-mscan\0mpc5200-mscan";
+ compatible = "mpc5200b-mscan","mpc5200-mscan";
cell-index = <1>;
interrupts = <2 12 0>;
interrupt-parent = <&mpc5200_pic>;
@@ -169,14 +169,14 @@
};
gpio at b00 {
- compatible = "mpc5200b-gpio\0mpc5200-gpio";
+ compatible = "mpc5200b-gpio","mpc5200-gpio";
reg = <b00 40>;
interrupts = <1 7 0>;
interrupt-parent = <&mpc5200_pic>;
};
gpio-wkup at c00 {
- compatible = "mpc5200b-gpio-wkup\0mpc5200-gpio-wkup";
+ compatible = "mpc5200b-gpio-wkup","mpc5200-gpio-wkup";
reg = <c00 40>;
interrupts = <1 8 0 0 3 0>;
interrupt-parent = <&mpc5200_pic>;
@@ -184,7 +184,7 @@
spi at f00 {
device_type = "spi";
- compatible = "mpc5200b-spi\0mpc5200-spi";
+ compatible = "mpc5200b-spi","mpc5200-spi";
reg = <f00 20>;
interrupts = <2 d 0 2 e 0>;
interrupt-parent = <&mpc5200_pic>;
@@ -192,7 +192,7 @@
usb at 1000 {
device_type = "usb-ohci-be";
- compatible = "mpc5200b-ohci\0mpc5200-ohci\0ohci-be";
+ compatible = "mpc5200b-ohci","mpc5200-ohci","ohci-be";
reg = <1000 ff>;
interrupts = <2 6 0>;
interrupt-parent = <&mpc5200_pic>;
@@ -200,7 +200,7 @@
bestcomm at 1200 {
device_type = "dma-controller";
- compatible = "mpc5200b-bestcomm\0mpc5200-bestcomm";
+ compatible = "mpc5200b-bestcomm","mpc5200-bestcomm";
reg = <1200 80>;
interrupts = <3 0 0 3 1 0 3 2 0 3 3 0
3 4 0 3 5 0 3 6 0 3 7 0
@@ -210,13 +210,13 @@
};
xlb at 1f00 {
- compatible = "mpc5200b-xlb\0mpc5200-xlb";
+ compatible = "mpc5200b-xlb","mpc5200-xlb";
reg = <1f00 100>;
};
serial at 2000 { // PSC1
device_type = "serial";
- compatible = "mpc5200b-psc-uart\0mpc5200-psc-uart";
+ compatible = "mpc5200b-psc-uart","mpc5200-psc-uart";
port-number = <0>; // Logical port assignment
cell-index = <0>;
reg = <2000 100>;
@@ -227,7 +227,7 @@
// PSC2 in ac97 mode example
//ac97 at 2200 { // PSC2
// device_type = "sound";
- // compatible = "mpc5200b-psc-ac97\0mpc5200-psc-ac97";
+ // compatible = "mpc5200b-psc-ac97","mpc5200-psc-ac97";
// cell-index = <1>;
// reg = <2200 100>;
// interrupts = <2 2 0>;
@@ -247,7 +247,7 @@
// PSC4 in uart mode example
//serial at 2600 { // PSC4
// device_type = "serial";
- // compatible = "mpc5200b-psc-uart\0mpc5200-psc-uart";
+ // compatible = "mpc5200b-psc-uart","mpc5200-psc-uart";
// cell-index = <3>;
// reg = <2600 100>;
// interrupts = <2 b 0>;
@@ -257,7 +257,7 @@
// PSC5 in uart mode example
//serial at 2800 { // PSC5
// device_type = "serial";
- // compatible = "mpc5200b-psc-uart\0mpc5200-psc-uart";
+ // compatible = "mpc5200b-psc-uart","mpc5200-psc-uart";
// cell-index = <4>;
// reg = <2800 100>;
// interrupts = <2 c 0>;
@@ -267,7 +267,7 @@
// PSC6 in spi mode example
//spi at 2c00 { // PSC6
// device_type = "spi";
- // compatible = "mpc5200b-psc-spi\0mpc5200-psc-spi";
+ // compatible = "mpc5200b-psc-spi","mpc5200-psc-spi";
// cell-index = <5>;
// reg = <2c00 100>;
// interrupts = <2 4 0>;
@@ -276,7 +276,7 @@
ethernet at 3000 {
device_type = "network";
- compatible = "mpc5200b-fec\0mpc5200-fec";
+ compatible = "mpc5200b-fec","mpc5200-fec";
reg = <3000 800>;
mac-address = [ 02 03 04 05 06 07 ]; // Bad!
interrupts = <2 5 0>;
@@ -285,7 +285,7 @@
ata at 3a00 {
device_type = "ata";
- compatible = "mpc5200b-ata\0mpc5200-ata";
+ compatible = "mpc5200b-ata","mpc5200-ata";
reg = <3a00 100>;
interrupts = <2 7 0>;
interrupt-parent = <&mpc5200_pic>;
@@ -293,7 +293,7 @@
i2c at 3d00 {
device_type = "i2c";
- compatible = "mpc5200b-i2c\0mpc5200-i2c\0fsl-i2c";
+ compatible = "mpc5200b-i2c","mpc5200-i2c","fsl-i2c";
cell-index = <0>;
reg = <3d00 40>;
interrupts = <2 f 0>;
@@ -303,7 +303,7 @@
i2c at 3d40 {
device_type = "i2c";
- compatible = "mpc5200b-i2c\0mpc5200-i2c\0fsl-i2c";
+ compatible = "mpc5200b-i2c","mpc5200-i2c","fsl-i2c";
cell-index = <1>;
reg = <3d40 40>;
interrupts = <2 10 0>;
@@ -312,7 +312,7 @@
};
sram at 8000 {
device_type = "sram";
- compatible = "mpc5200b-sram\0mpc5200-sram\0sram";
+ compatible = "mpc5200b-sram","mpc5200-sram","sram";
reg = <8000 4000>;
};
};
@@ -322,7 +322,7 @@
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
- compatible = "mpc5200b-pci\0mpc5200-pci";
+ compatible = "mpc5200b-pci","mpc5200-pci";
reg = <f0000d00 100>;
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <c000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot
More information about the Linuxppc-dev
mailing list