[PATCH 07/15] [POWERPC] Promess Motion-PRO DTS
Marian Balakowicz
m8 at semihalf.com
Sun Oct 7 21:25:33 EST 2007
Add device tree source file for Motion-PRO board.
Signed-off-by: Marian Balakowicz <m8 at semihalf.com>
---
motionpro.dts | 334 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 334 insertions(+)
diff --git a/arch/powerpc/boot/dts/motionpro.dts b/arch/powerpc/boot/dts/motionpro.dts
new file mode 100644
index 0000000..4b197c8
--- /dev/null
+++ b/arch/powerpc/boot/dts/motionpro.dts
@@ -0,0 +1,334 @@
+/*
+ * Motion-PRO board Device Tree Source, based on Lite5200B DTS.
+ *
+ * Copyright (C) 2007 Semihalf
+ * Modified for CM5200 by Marian Balakowicz <m8 at semihalf.com>
+ *
+ * Copyright 2006-2007 Secret Lab Technologies Ltd.
+ * Grant Likely <grant.likely at secretlab.ca>
+ *
+ * Copyright (C) 2007 DENX Software Engineering
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/*
+ * WARNING: Do not depend on this tree layout remaining static just yet.
+ * The MPC5200 device tree conventions are still in flux
+ * Keep an eye on the linuxppc-dev mailing list for more details
+ */
+
+/ {
+ model = "fsl,motionpro";
+ // revision = "1.0";
+ compatible = "fsl,motionpro\0generic-mpc5200";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,5200 at 0 {
+ device_type = "cpu";
+ reg = <0>;
+ d-cache-line-size = <20>;
+ i-cache-line-size = <20>;
+ d-cache-size = <4000>; // L1, 16K
+ i-cache-size = <4000>; // L1, 16K
+ timebase-frequency = <0>; // from bootloader
+ bus-frequency = <0>; // from bootloader
+ clock-frequency = <0>; // from bootloader
+ 32-bit;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <00000000 04000000>; // 64MB
+ };
+
+ soc5200 at f0000000 {
+ model = "fsl,mpc5200b";
+ compatible = "mpc5200";
+ revision = ""; // from bootloader
+ #interrupt-cells = <3>;
+ device_type = "soc";
+ ranges = <0 f0000000 f0010000>;
+ reg = <f0000000 00010000>;
+ bus-frequency = <0>; // from bootloader
+ system-frequency = <0>; // from bootloader
+
+ cdm at 200 {
+ compatible = "mpc5200b-cdm\0mpc5200-cdm";
+ reg = <200 38>;
+ };
+
+ mpc5200_pic: pic at 500 {
+ // 5200 interrupts are encoded into two levels;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ device_type = "interrupt-controller";
+ compatible = "mpc5200b-pic\0mpc5200-pic";
+ reg = <500 80>;
+ built-in;
+ };
+
+ gpt at 600 { // General Purpose Timer
+ compatible = "mpc5200b-gpt\0mpc5200-gpt";
+ device_type = "gpt";
+ cell-index = <0>;
+ reg = <600 10>;
+ interrupts = <1 9 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ has-wdt;
+ };
+
+ gpt at 610 { // General Purpose Timer
+ compatible = "mpc5200b-gpt\0mpc5200-gpt";
+ device_type = "gpt";
+ cell-index = <1>;
+ reg = <610 10>;
+ interrupts = <1 a 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ gpt at 620 { // General Purpose Timer
+ compatible = "mpc5200b-gpt\0mpc5200-gpt";
+ device_type = "gpt";
+ cell-index = <2>;
+ reg = <620 10>;
+ interrupts = <1 b 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ gpt at 630 { // General Purpose Timer
+ compatible = "mpc5200b-gpt\0mpc5200-gpt";
+ device_type = "gpt";
+ cell-index = <3>;
+ reg = <630 10>;
+ interrupts = <1 c 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ gpt at 640 { // General Purpose Timer
+ compatible = "mpc5200b-gpt\0mpc5200-gpt";
+ device_type = "gpt";
+ cell-index = <4>;
+ reg = <640 10>;
+ interrupts = <1 d 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ gpt at 650 { // General Purpose Timer
+ compatible = "mpc5200b-gpt\0mpc5200-gpt";
+ device_type = "gpt";
+ cell-index = <5>;
+ reg = <650 10>;
+ interrupts = <1 e 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ gpt at 660 { // General Purpose Timer
+ compatible = "mpc5200b-gpt\0mpc5200-gpt";
+ device_type = "gpt";
+ cell-index = <6>;
+ reg = <660 10>;
+ interrupts = <1 f 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ gpt at 670 { // General Purpose Timer
+ compatible = "mpc5200b-gpt\0mpc5200-gpt";
+ device_type = "gpt";
+ cell-index = <7>;
+ reg = <670 10>;
+ interrupts = <1 10 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ rtc at 800 { // Real time clock
+ compatible = "mpc5200b-rtc\0mpc5200-rtc";
+ device_type = "rtc";
+ reg = <800 100>;
+ interrupts = <1 5 0 1 6 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ mscan at 980 {
+ device_type = "mscan";
+ compatible = "mpc5200b-mscan\0mpc5200-mscan";
+ cell-index = <1>;
+ interrupts = <2 12 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ reg = <980 80>;
+ };
+
+ gpio at b00 {
+ compatible = "mpc5200b-gpio\0mpc5200-gpio";
+ reg = <b00 40>;
+ interrupts = <1 7 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ gpio-wkup at c00 {
+ compatible = "mpc5200b-gpio-wkup\0mpc5200-gpio-wkup";
+ reg = <c00 40>;
+ interrupts = <1 8 0 0 3 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ pci at 0d00 {
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ compatible = "mpc5200b-pci\0mpc5200-pci";
+ reg = <d00 100>;
+ interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map = <c000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot
+ c000 0 0 2 &mpc5200_pic 1 1 3
+ c000 0 0 3 &mpc5200_pic 1 2 3
+ c000 0 0 4 &mpc5200_pic 1 3 3
+
+ c800 0 0 1 &mpc5200_pic 1 1 3 // 2nd slot
+ c800 0 0 2 &mpc5200_pic 1 2 3
+ c800 0 0 3 &mpc5200_pic 1 3 3
+ c800 0 0 4 &mpc5200_pic 0 0 3>;
+ clock-frequency = <0>; // From boot loader
+ interrupts = <2 8 0 2 9 0 2 a 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ bus-range = <0 0>;
+ ranges = <42000000 0 80000000 80000000 0 20000000
+ 02000000 0 a0000000 a0000000 0 10000000
+ 01000000 0 00000000 b0000000 0 01000000>;
+ };
+
+ spi at f00 {
+ device_type = "spi";
+ compatible = "mpc5200b-spi\0mpc5200-spi";
+ reg = <f00 20>;
+ interrupts = <2 d 0 2 e 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ usb at 1000 {
+ device_type = "usb-ohci-be";
+ compatible = "mpc5200b-ohci\0mpc5200-ohci\0ohci-be";
+ reg = <1000 ff>;
+ interrupts = <2 6 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ bestcomm at 1200 {
+ device_type = "dma-controller";
+ compatible = "mpc5200b-bestcomm\0mpc5200-bestcomm";
+ reg = <1200 80>;
+ interrupts = <3 0 0 3 1 0 3 2 0 3 3 0
+ 3 4 0 3 5 0 3 6 0 3 7 0
+ 3 8 0 3 9 0 3 a 0 3 b 0
+ 3 c 0 3 d 0 3 e 0 3 f 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ xlb at 1f00 {
+ compatible = "mpc5200b-xlb\0mpc5200-xlb";
+ reg = <1f00 100>;
+ };
+
+ serial at 2000 { // PSC1
+ device_type = "serial";
+ compatible = "mpc5200b-psc-uart\0mpc5200-psc-uart";
+ port-number = <0>; // Logical port assignment
+ cell-index = <0>;
+ reg = <2000 100>;
+ interrupts = <2 1 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ // PSC2 in spi master mode
+ spi at 2200 { // PSC2
+ device_type = "spi";
+ compatible = "mpc5200b-psc-spi\0mpc5200-psc-spi";
+ cell-index = <1>;
+ reg = <2200 100>;
+ interrupts = <2 2 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ // PSC5 in uart mode example
+ serial at 2800 { // PSC5
+ device_type = "serial";
+ compatible = "mpc5200b-psc-uart\0mpc5200-psc-uart";
+ port-number = <4>; // Logical port assignment
+ cell-index = <4>;
+ reg = <2800 100>;
+ interrupts = <2 c 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ ethernet at 3000 {
+ device_type = "network";
+ compatible = "mpc5200b-fec\0mpc5200-fec";
+ reg = <3000 800>;
+ mac-address = [ 02 03 04 05 06 07 ]; // Bad!
+ interrupts = <2 5 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ ata at 3a00 {
+ device_type = "ata";
+ compatible = "mpc5200b-ata\0mpc5200-ata";
+ reg = <3a00 100>;
+ interrupts = <2 7 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+
+ i2c at 3d40 {
+ device_type = "i2c";
+ compatible = "mpc5200b-i2c\0mpc5200-i2c\0fsl-i2c";
+ cell-index = <1>;
+ reg = <3d40 40>;
+ interrupts = <2 10 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ fsl5200-clocking;
+ };
+ sram at 8000 {
+ device_type = "sram";
+ compatible = "mpc5200b-sram\0mpc5200-sram\0sram";
+ reg = <8000 4000>;
+ };
+
+ };
+ kollmorgen {
+ device_type = "kollmorgen";
+ compatible = "kollmorgen";
+ reg = <50000000 ffff>;
+ interrupts = <1 1 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ };
+ cpld {
+ device_type = "cpld";
+ compatible = "cpld";
+ reg = <50010000 ffff>;
+ };
+ anybus {
+ device_type = "anybus";
+ compatible = "anybus";
+ reg = <50020000 ffff>;
+ };
+ pro_module_general {
+ device_type = "pro_module_general";
+ compatible = "pro_module_general";
+ reg = <50020000 3>;
+ };
+ pro_module_dio {
+ device_type = "pro_module_dio";
+ compatible = "pro_module_dio";
+ reg = <50020800 2>;
+ };
+
+};
More information about the Linuxppc-dev
mailing list