[PATCH 5/7] [POWERPC] mpc85xx_mds: reset UCC ethernet properly
Anton Vorontsov
avorontsov at ru.mvista.com
Sat Oct 6 03:46:47 EST 2007
Apart from that the current code doesn't compile it's also
meaningless with regard to the MPC8568E-MDS' BCSR.
This patch used to reset UCCs properly.
Signed-off-by: Anton Vorontsov <avorontsov at ru.mvista.com>
---
arch/powerpc/platforms/85xx/mpc85xx_mds.c | 28 ++++++++++++++++------------
1 files changed, 16 insertions(+), 12 deletions(-)
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
index 57e840a..6913e99 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
@@ -113,18 +113,22 @@ static void __init mpc85xx_mds_setup_arch(void)
}
if (bcsr_regs) {
- u8 bcsr_phy;
-
- /* Reset the Ethernet PHY */
- bcsr_phy = in_be8(&bcsr_regs[9]);
- bcsr_phy &= ~0x20;
- out_be8(&bcsr_regs[9], bcsr_phy);
-
- udelay(1000);
-
- bcsr_phy = in_be8(&bcsr_regs[9]);
- bcsr_phy |= 0x20;
- out_be8(&bcsr_regs[9], bcsr_phy);
+#define BCSR_UCC1_GETH_EN (0x1 << 7)
+#define BCSR_UCC2_GETH_EN (0x1 << 7)
+#define BCSR_UCC1_MODE_MSK (0x3 << 4)
+#define BCSR_UCC2_MODE_MSK (0x3 << 0)
+
+ /* Turn off UCC1 & UCC2 */
+ clrbits8(&bcsr_regs[8], BCSR_UCC1_GETH_EN);
+ clrbits8(&bcsr_regs[9], BCSR_UCC2_GETH_EN);
+
+ /* Mode is RGMII, all bits clear */
+ clrbits8(&bcsr_regs[11], BCSR_UCC1_MODE_MSK |
+ BCSR_UCC2_MODE_MSK);
+
+ /* Turn UCC1 & UCC2 on */
+ setbits8(&bcsr_regs[8], BCSR_UCC1_GETH_EN);
+ setbits8(&bcsr_regs[9], BCSR_UCC2_GETH_EN);
iounmap(bcsr_regs);
}
--
1.5.0.6
More information about the Linuxppc-dev
mailing list