[PATCH 2/5] Add initial MPC8610 HPCD Platform files.
Jon Loeliger
jdl at freescale.com
Thu Oct 4 06:09:33 EST 2007
From: Xianghua Xiao <x.xiao at freescale.com>
Signed-off-by: Xianghua Xiao <x.xiao at freescale.com>
Signed-off-by: Jason Jin <Jason.jin at freescale.com>
Signed-off-by: Jon Loelier <jdl at freescale.com>
---
arch/powerpc/platforms/86xx/mpc8610_hpcd.c | 267 ++++++++++++++++++++++++++++
1 files changed, 267 insertions(+), 0 deletions(-)
create mode 100644 arch/powerpc/platforms/86xx/mpc8610_hpcd.c
diff --git a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
new file mode 100644
index 0000000..ba73163
--- /dev/null
+++ b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
@@ -0,0 +1,267 @@
+/*
+ * MPC8610 HPCD board specific routines
+ *
+ * Initial author: Xianghua Xiao <x.xiao at freescale.com>
+ * Recode: Jason Jin <jason.jin at freescale.com>
+ *
+ * Rewrite the interrupt routing. remove the 8259PIC support,
+ * All the integrated device in ULI use sideband interrupt.
+ *
+ * Copyright 2007 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/delay.h>
+#include <linux/seq_file.h>
+
+#include <asm/system.h>
+#include <asm/time.h>
+#include <asm/machdep.h>
+#include <asm/pci-bridge.h>
+#include <asm/mpc86xx.h>
+#include <asm/prom.h>
+#include <mm/mmu_decl.h>
+#include <asm/udbg.h>
+
+#include <asm/mpic.h>
+
+#include <sysdev/fsl_pci.h>
+#include <sysdev/fsl_soc.h>
+
+#include "mpc86xx.h"
+
+#define MPC86XX_RSTCR_OFFSET (0xe00b0) /* Reset Control Register */
+
+
+void __init
+mpc86xx_hpcd_init_irq(void)
+{
+ struct mpic *mpic1;
+ struct device_node *np;
+ struct resource res;
+
+ /* Determine PIC address. */
+ np = of_find_node_by_type(NULL, "open-pic");
+ if (np == NULL)
+ return;
+ of_address_to_resource(np, 0, &res);
+
+ /* Alloc mpic structure and per isu has 16 INT entries. */
+ mpic1 = mpic_alloc(np, res.start,
+ MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
+ 0, 256, " MPIC ");
+ BUG_ON(mpic1 == NULL);
+
+ mpic_init(mpic1);
+
+}
+
+
+#ifdef CONFIG_PCI
+static void __devinit quirk_uli1575(struct pci_dev *dev)
+{
+ u32 temp32;
+
+ /* Disable INTx */
+ pci_read_config_dword(dev, 0x48, &temp32);
+ pci_write_config_dword(dev, 0x48, (temp32 | 1<<26));
+
+ /* Enable sideband interrupt */
+ pci_read_config_dword(dev, 0x90, &temp32);
+ pci_write_config_dword(dev, 0x90, (temp32 | 1<<22));
+}
+
+
+static void __devinit quirk_uli5288(struct pci_dev *dev)
+{
+ unsigned char c;
+ unsigned short temp;
+
+ /* Interrupt Disable, Needed when SATA disabled */
+ pci_read_config_word(dev, PCI_COMMAND, &temp);
+ temp |= 1<<10;
+ pci_write_config_word(dev, PCI_COMMAND, temp);
+
+ pci_read_config_byte(dev, 0x83, &c);
+ c |= 0x80;
+ pci_write_config_byte(dev, 0x83, c);
+
+ pci_write_config_byte(dev, PCI_CLASS_PROG, 0x01);
+ pci_write_config_byte(dev, PCI_CLASS_DEVICE, 0x06);
+
+ pci_read_config_byte(dev, 0x83, &c);
+ c &= 0x7f;
+ pci_write_config_byte(dev, 0x83, c);
+}
+
+
+/*
+ * Since 8259PIC was disabled on the board, the IDE device can not
+ * use the legacy IRQ, we need to let the IDE device work under
+ * native mode and use the interrupt line like other PCI devices.
+ * IRQ14 is a sideband interrupt from IDE device to CPU and we use this
+ * as the interrupt for IDE device.
+ */
+static void __devinit quirk_uli5229(struct pci_dev *dev)
+{
+ unsigned char c;
+
+ pci_read_config_byte(dev, 0x4b, &c);
+ c |= 0x10;
+ pci_write_config_byte(dev, 0x4b, c);
+}
+
+
+/*
+ * SATA interrupt pin bug fix
+ * There's a chip bug for 5288, The interrupt pin should be 2,
+ * not the read only value 1, So it use INTB#, not INTA# which
+ * actually used by the IDE device 5229.
+ * As of this bug, during the PCI initialization, 5288 read the
+ * irq of IDE device from the device tree, this function fix this
+ * bug by re-assigning a correct irq to 5288.
+ *
+ */
+static void __devinit final_uli5288(struct pci_dev *dev)
+{
+ struct pci_controller *hose = pci_bus_to_host(dev->bus);
+ struct device_node *hosenode = hose ? hose->arch_data : NULL;
+ struct of_irq oirq;
+ int virq, pin = 2;
+ u32 laddr[3];
+
+ if (!hosenode)
+ return;
+
+ laddr[0] = (hose->first_busno << 16) | (PCI_DEVFN(31, 0) << 8);
+ laddr[1] = laddr[2] = 0;
+ of_irq_map_raw(hosenode, &pin, 1, laddr, &oirq);
+ virq = irq_create_of_mapping(oirq.controller, oirq.specifier,
+ oirq.size);
+ dev->irq = virq;
+}
+
+
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x1575, quirk_uli1575);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5288, quirk_uli5288);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5229, quirk_uli5229);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, 0x5288, final_uli5288);
+#endif /* CONFIG_PCI */
+
+
+static void __init
+mpc86xx_hpcd_setup_arch(void)
+{
+#ifdef CONFIG_PCI
+ struct device_node *np;
+#endif
+ if (ppc_md.progress)
+ ppc_md.progress("mpc86xx_hpcd_setup_arch()", 0);
+
+#ifdef CONFIG_PCI
+ for_each_node_by_type(np, "pci") {
+ if (of_device_is_compatible(np, "fsl,mpc8610-pci")
+ || of_device_is_compatible(np, "fsl,mpc8641-pcie")) {
+ struct resource rsrc;
+ of_address_to_resource(np, 0, &rsrc);
+ if ((rsrc.start & 0xfffff) == 0xa000)
+ fsl_add_bridge(np, 1);
+ else
+ fsl_add_bridge(np, 0);
+ }
+ }
+#endif
+
+ printk("MPC86xx HPCD board from Freescale Semiconductor\n");
+}
+
+
+void
+mpc86xx_hpcd_show_cpuinfo(struct seq_file *m)
+{
+ struct device_node *root;
+ uint memsize = total_memory;
+ const char *model = "";
+ uint svid = mfspr(SPRN_SVR);
+
+ seq_printf(m, "Vendor\t\t: Freescale Semiconductor\n");
+
+ root = of_find_node_by_path("/");
+ if (root)
+ model = of_get_property(root, "model", NULL);
+ seq_printf(m, "Machine\t\t: %s\n", model);
+ of_node_put(root);
+
+ seq_printf(m, "SVR\t\t: 0x%x\n", svid);
+ seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024));
+}
+
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+static int __init mpc86xx_hpcd_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+
+ if (of_flat_dt_is_compatible(root, "fsl,MPC8610HPCD"))
+ return 1; /* Looks good */
+
+ return 0;
+}
+
+
+void
+mpc86xx_restart(char *cmd)
+{
+ void __iomem *rstcr;
+
+ rstcr = ioremap(get_immrbase() + MPC86XX_RSTCR_OFFSET, 0x100);
+
+ local_irq_disable();
+
+ /* Assert reset request to Reset Control Register */
+ out_be32(rstcr, 0x2);
+
+ /* not reached */
+}
+
+
+long __init
+mpc86xx_time_init(void)
+{
+ unsigned int temp;
+
+ /* Set the time base to zero */
+ mtspr(SPRN_TBWL, 0);
+ mtspr(SPRN_TBWU, 0);
+
+ temp = mfspr(SPRN_HID0);
+ temp |= HID0_TBEN;
+ mtspr(SPRN_HID0, temp);
+ asm volatile("isync");
+
+ return 0;
+}
+
+define_machine(mpc86xx_hpcd) {
+ .name = "MPC86xx HPCD",
+ .probe = mpc86xx_hpcd_probe,
+ .setup_arch = mpc86xx_hpcd_setup_arch,
+ .init_IRQ = mpc86xx_hpcd_init_irq,
+ .show_cpuinfo = mpc86xx_hpcd_show_cpuinfo,
+ .get_irq = mpic_get_irq,
+ .restart = mpc86xx_restart,
+ .time_init = mpc86xx_time_init,
+ .calibrate_decr = generic_calibrate_decr,
+ .progress = udbg_progress,
+ .pcibios_fixup_bus = fsl_pcibios_fixup_bus,
+};
--
1.5.3
More information about the Linuxppc-dev
mailing list