[PATCH 2 5/7] Uartlite: Comment block tidy
Grant Likely
grant.likely at secretlab.ca
Mon Oct 1 08:42:03 EST 2007
From: Grant Likely <grant.likely at secretlab.ca>
Tidy the comments to split the driver into logical section; the main driver,
the console driver, the platform bus binding, and module initialization
and teardown.
Signed-off-by: Grant Likely <grant.likely at secretlab.ca>
---
drivers/serial/uartlite.c | 43 ++++++++++++++++++++++++++++++++++++++++---
1 files changed, 40 insertions(+), 3 deletions(-)
diff --git a/drivers/serial/uartlite.c b/drivers/serial/uartlite.c
index c00a627..ed13b9f 100644
--- a/drivers/serial/uartlite.c
+++ b/drivers/serial/uartlite.c
@@ -23,9 +23,13 @@
#define ULITE_MINOR 187
#define ULITE_NR_UARTS 4
-/* For register details see datasheet:
- http://www.xilinx.com/bvdocs/ipcenter/data_sheet/opb_uartlite.pdf
-*/
+/* ---------------------------------------------------------------------
+ * Register definitions
+ *
+ * For register details see datasheet:
+ * http://www.xilinx.com/bvdocs/ipcenter/data_sheet/opb_uartlite.pdf
+ */
+
#define ULITE_RX 0x00
#define ULITE_TX 0x04
#define ULITE_STATUS 0x08
@@ -49,6 +53,10 @@
static struct uart_port ulite_ports[ULITE_NR_UARTS];
+/* ---------------------------------------------------------------------
+ * Core UART driver operations
+ */
+
static int ulite_receive(struct uart_port *port, int stat)
{
struct tty_struct *tty = port->info->tty;
@@ -308,6 +316,10 @@ static struct uart_ops ulite_ops = {
.verify_port = ulite_verify_port
};
+/* ---------------------------------------------------------------------
+ * Console driver operations
+ */
+
#ifdef CONFIG_SERIAL_UARTLITE_CONSOLE
static void ulite_console_wait_tx(struct uart_port *port)
{
@@ -413,6 +425,19 @@ static struct uart_driver ulite_uart_driver = {
#endif
};
+/* ---------------------------------------------------------------------
+ * Port assignment functions (mapping devices to uart_port structures)
+ */
+
+/** ulite_assign: register a uartlite device with the driver
+ *
+ * @dev: pointer to device structure
+ * @id: requested id number. Pass -1 for automatic port assignment
+ * @base: base address of uartlite registers
+ * @irq: irq number for uartlite
+ *
+ * Returns: 0 on success, <0 otherwise
+ */
static int __devinit ulite_assign(struct device *dev, int id, u32 base, int irq)
{
struct uart_port *port;
@@ -465,6 +490,10 @@ static int __devinit ulite_assign(struct device *dev, int id, u32 base, int irq)
return 0;
}
+/** ulite_release: register a uartlite device with the driver
+ *
+ * @dev: pointer to device structure
+ */
static int __devinit ulite_release(struct device *dev)
{
struct uart_port *port = dev_get_drvdata(dev);
@@ -479,6 +508,10 @@ static int __devinit ulite_release(struct device *dev)
return rc;
}
+/* ---------------------------------------------------------------------
+ * Platform bus binding
+ */
+
static int __devinit ulite_probe(struct platform_device *pdev)
{
struct resource *res, *res2;
@@ -508,6 +541,10 @@ static struct platform_driver ulite_platform_driver = {
},
};
+/* ---------------------------------------------------------------------
+ * Module setup/teardown
+ */
+
int __init ulite_init(void)
{
int ret;
More information about the Linuxppc-dev
mailing list