[PATCH 10/14] powerpc: 4xx PLB to PCI 2.x support
Benjamin Herrenschmidt
benh at kernel.crashing.org
Wed Nov 21 17:15:03 EST 2007
This adds to the previous patch the support for the 4xx PCI 2.x
bridges.
Signed-off-by: Benjamin Herrenschmidt <benh at kernel.crashing.org>
---
This version implement the basic support for the 405GP bridge,
I haven't yet looked at differences that other implementations
may have for the PCI 2.x part.
arch/powerpc/sysdev/ppc4xx_pci.c | 183 ++++++++++++++++++++++++++++++++++++++-
arch/powerpc/sysdev/ppc4xx_pci.h | 19 ++++
2 files changed, 201 insertions(+), 1 deletion(-)
Index: linux-work/arch/powerpc/sysdev/ppc4xx_pci.c
===================================================================
--- linux-work.orig/arch/powerpc/sysdev/ppc4xx_pci.c 2007-11-21 12:50:48.000000000 +1100
+++ linux-work/arch/powerpc/sysdev/ppc4xx_pci.c 2007-11-21 15:35:37.000000000 +1100
@@ -25,6 +25,38 @@ extern unsigned long total_memory;
/* Defined in drivers/pci/pci.c but not exposed by a header */
extern u8 pci_cache_line_size;
+static void fixup_ppc4xx_pci_bridge(struct pci_dev* dev)
+{
+ struct pci_controller *hose;
+ struct device_node *np;
+ int i;
+
+ if (dev->devfn != 0 || dev->bus->self != NULL)
+ return;
+
+ hose = pci_bus_to_host(dev->bus);
+ if (hose == NULL)
+ return;
+ np = hose->arch_data;
+
+ if (!of_device_is_compatible(np, "ibm,plb-pciex") &&
+ !of_device_is_compatible(np, "ibm,plb-pcix") &&
+ !of_device_is_compatible(np, "ibm,plb-pci"))
+ return;
+
+ /* Hide the PCI host BARs from the kernel as their content doesn't
+ * fit well in the resource management
+ */
+ for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
+ dev->resource[i].start = dev->resource[i].end = 0;
+ dev->resource[i].flags = 0;
+ }
+
+ printk(KERN_INFO "PCI: Hiding 4xx host bridge resources %s\n",
+ pci_name(dev));
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, fixup_ppc4xx_pci_bridge);
+
static int __init ppc4xx_parse_dma_window(struct pci_controller *hose,
void __iomem *reg,
struct resource *res)
@@ -103,9 +135,158 @@ static int __init ppc4xx_parse_dma_windo
/*
* 4xx PCI 2.x part
*/
+
+static void __init ppc4xx_configure_pci_PMMs(struct pci_controller *hose,
+ void __iomem *reg)
+{
+ struct device_node *np = hose->arch_data;
+ u32 la, ma, pcila, pciha;
+ int i, j;
+
+ /* Setup outbound memory windows */
+ for(i = j = 0; i < 3; i++) {
+ struct resource *res = &hose->mem_resources[i];
+
+ /* we only care about memory windows */
+ if (!(res->flags & IORESOURCE_MEM))
+ continue;
+ if (j > 2) {
+ printk(KERN_WARNING "%s: Too many ranges\n",
+ np->full_name);
+ break;
+ }
+
+ /* Calculate register values */
+ la = res->start;
+#ifdef CONFIG_RESOURCES_64BIT
+ pciha = (res->start - hose->pci_mem_offset) >> 32;
+ pcila = (res->start - hose->pci_mem_offset) & 0xffffffffu;
+#else
+ pciha = 0;
+ pcila = res->start - hose->pci_mem_offset;
+#endif
+
+ ma = res->end + 1 - res->start;
+ if (!is_power_of_2(ma) || ma < 0x1000 || ma > 0xffffffffu) {
+ printk(KERN_WARNING "%s: Resource out of range\n",
+ np->full_name);
+ continue;
+ }
+ ma = (0xffffffffu << ilog2(ma)) | 0x1;
+ if (res->flags & IORESOURCE_PREFETCH)
+ ma |= 0x2;
+
+ /* Program register values */
+ writel(la, reg + PCIL0_PMM0LA + (0x10 * j));
+ writel(pcila, reg + PCIL0_PMM0PCILA + (0x10 * j));
+ writel(pciha, reg + PCIL0_PMM0PCIHA + (0x10 * j));
+ writel(ma, reg + PCIL0_PMM0MA + (0x10 * j));
+ j++;
+ }
+}
+
+static void __init ppc4xx_configure_pci_PTMs(struct pci_controller *hose,
+ void __iomem *reg,
+ const struct resource *res)
+{
+ resource_size_t size = res->end - res->start + 1;
+ u32 sa;
+
+ /* Calculate window size */
+ sa = (0xffffffffu << ilog2(size)) | 1;
+ sa |= 0x1;
+
+ /* RAM is always at 0 local for now */
+ writel(0, reg + PCIL0_PTM1LA);
+ writel(sa, reg + PCIL0_PTM1MS);
+
+ /* Map on PCI side */
+ early_write_config_dword(hose, hose->first_busno, 0,
+ PCI_BASE_ADDRESS_1, res->start);
+ early_write_config_dword(hose, hose->first_busno, 0,
+ PCI_BASE_ADDRESS_2, 0x00000000);
+ early_write_config_word(hose, hose->first_busno, 0,
+ PCI_COMMAND, 0x0006);
+}
+
static void __init ppc4xx_probe_pci_bridge(struct device_node *np)
{
/* NYI */
+ struct resource rsrc_cfg;
+ struct resource rsrc_reg;
+ struct resource dma_window;
+ struct pci_controller *hose = NULL;
+ void __iomem *reg = NULL;
+ const int *bus_range;
+ int primary = 0;
+
+ /* Fetch config space registers address */
+ if (of_address_to_resource(np, 0, &rsrc_cfg)) {
+ printk(KERN_ERR "%s:Can't get PCI config register base !",
+ np->full_name);
+ return;
+ }
+ /* Fetch host bridge internal registers address */
+ if (of_address_to_resource(np, 3, &rsrc_reg)) {
+ printk(KERN_ERR "%s: Can't get PCI internal register base !",
+ np->full_name);
+ return;
+ }
+
+ /* Check if primary bridge */
+ if (of_get_property(np, "primary", NULL))
+ primary = 1;
+
+ /* Get bus range if any */
+ bus_range = of_get_property(np, "bus-range", NULL);
+
+ /* Map registers */
+ reg = ioremap(rsrc_reg.start, rsrc_reg.end + 1 - rsrc_reg.start);
+ if (reg == NULL) {
+ printk(KERN_ERR "%s: Can't map registers !", np->full_name);
+ goto fail;
+ }
+
+ /* Allocate the host controller data structure */
+ hose = pcibios_alloc_controller(np);
+ if (!hose)
+ goto fail;
+
+ hose->first_busno = bus_range ? bus_range[0] : 0x0;
+ hose->last_busno = bus_range ? bus_range[1] : 0xff;
+
+ /* Setup config space */
+ setup_indirect_pci(hose, rsrc_cfg.start, rsrc_cfg.start + 0x4, 0);
+
+ /* Disable all windows */
+ writel(0, reg + PCIL0_PMM0MA);
+ writel(0, reg + PCIL0_PMM1MA);
+ writel(0, reg + PCIL0_PMM2MA);
+ writel(0, reg + PCIL0_PTM1MS);
+ writel(0, reg + PCIL0_PTM2MS);
+
+ /* Parse outbound mapping resources */
+ pci_process_bridge_OF_ranges(hose, np, primary);
+
+ /* Parse inbound mapping resources */
+ if (ppc4xx_parse_dma_window(hose, reg, &dma_window) != 0)
+ goto fail;
+
+ /* Configure outbound ranges POMs */
+ ppc4xx_configure_pci_PMMs(hose, reg);
+
+ /* Configure inbound ranges PIMs */
+ ppc4xx_configure_pci_PTMs(hose, reg, &dma_window);
+
+ /* We don't need the registers anymore */
+ iounmap(reg);
+ return;
+
+ fail:
+ if (hose)
+ pcibios_free_controller(hose);
+ if (reg)
+ iounmap(reg);
}
/*
@@ -133,7 +314,7 @@ static void __init ppc4xx_configure_pcix
}
/* Calculate register values */
-#ifdef CONFIG_PTE_64BIT
+#ifdef CONFIG_RESOURCES_64BIT
lah = res->start >> 32;
lal = res->start & 0xffffffffu;
pciah = (res->start - hose->pci_mem_offset) >> 32;
Index: linux-work/arch/powerpc/sysdev/ppc4xx_pci.h
===================================================================
--- linux-work.orig/arch/powerpc/sysdev/ppc4xx_pci.h 2007-11-21 12:50:48.000000000 +1100
+++ linux-work/arch/powerpc/sysdev/ppc4xx_pci.h 2007-11-21 12:50:50.000000000 +1100
@@ -101,6 +101,25 @@
#define PCIX0_MSGOH 0x10c
#define PCIX0_IM 0x1f8
+/*
+ * 4xx PCI bridge register definitions
+ */
+#define PCIL0_PMM0LA 0x00
+#define PCIL0_PMM0MA 0x04
+#define PCIL0_PMM0PCILA 0x08
+#define PCIL0_PMM0PCIHA 0x0c
+#define PCIL0_PMM1LA 0x10
+#define PCIL0_PMM1MA 0x14
+#define PCIL0_PMM1PCILA 0x18
+#define PCIL0_PMM1PCIHA 0x1c
+#define PCIL0_PMM2LA 0x20
+#define PCIL0_PMM2MA 0x24
+#define PCIL0_PMM2PCILA 0x28
+#define PCIL0_PMM2PCIHA 0x2c
+#define PCIL0_PTM1MS 0x30
+#define PCIL0_PTM1LA 0x34
+#define PCIL0_PTM2MS 0x38
+#define PCIL0_PTM2LA 0x3c
#endif /* __PPC4XX_PCI_H__ */
More information about the Linuxppc-dev
mailing list