[RFC] PMU: remove dead code

[Benjamin Herrenschmidt]

On Thu, 2007-11-08 at 13:00 +0100, Johannes Berg wrote:
> Some code in via-pmu.c is never compiled because of "compile options"
> within the file. Remove the code completely.
> 
> Signed-off-by: Johannes Berg <johannes at sipsolutions.net>

Acked-by: Benjamin Herrenschmidt <benh at kernel.crashing.org>

> ---
>  drivers/macintosh/via-pmu.c |   42 +-----------------------------------------
>  1 file changed, 1 insertion(+), 41 deletions(-)
> 
> --- everything.orig/drivers/macintosh/via-pmu.c	2007-11-08 11:47:42.332847765 +0100
> +++ everything/drivers/macintosh/via-pmu.c	2007-11-08 11:48:37.192845813 +0100
> @@ -65,9 +65,7 @@
>  #include "via-pmu-event.h"
>  
>  /* Some compile options */
> -#undef SUSPEND_USES_PMU
>  #define DEBUG_SLEEP
> -#undef HACKED_PCI_SAVE
>  
>  /* Misc minor number allocated for /dev/pmu */
>  #define PMU_MINOR		154
> @@ -1255,9 +1253,7 @@ void
>  pmu_suspend(void)
>  {
>  	unsigned long flags;
> -#ifdef SUSPEND_USES_PMU
> -	struct adb_request *req;
> -#endif
> +
>  	if (!via)
>  		return;
>  	
> @@ -1275,17 +1271,10 @@ pmu_suspend(void)
>  		via_pmu_interrupt(0, NULL);
>  		spin_lock_irqsave(&pmu_lock, flags);
>  		if (!adb_int_pending && pmu_state == idle && !req_awaiting_reply) {
> -#ifdef SUSPEND_USES_PMU
> -			pmu_request(&req, NULL, 2, PMU_SET_INTR_MASK, 0);
> -			spin_unlock_irqrestore(&pmu_lock, flags);
> -			while(!req.complete)
> -				pmu_poll();
> -#else /* SUSPEND_USES_PMU */
>  			if (gpio_irq >= 0)
>  				disable_irq_nosync(gpio_irq);
>  			out_8(&via[IER], CB1_INT | IER_CLR);
>  			spin_unlock_irqrestore(&pmu_lock, flags);
> -#endif /* SUSPEND_USES_PMU */
>  			break;
>  		}
>  	} while (1);
> @@ -1306,18 +1295,11 @@ pmu_resume(void)
>  		return;
>  	}
>  	adb_int_pending = 1;
> -#ifdef SUSPEND_USES_PMU
> -	pmu_request(&req, NULL, 2, PMU_SET_INTR_MASK, pmu_intr_mask);
> -	spin_unlock_irqrestore(&pmu_lock, flags);
> -	while(!req.complete)
> -		pmu_poll();
> -#else /* SUSPEND_USES_PMU */
>  	if (gpio_irq >= 0)
>  		enable_irq(gpio_irq);
>  	out_8(&via[IER], CB1_INT | IER_SET);
>  	spin_unlock_irqrestore(&pmu_lock, flags);
>  	pmu_poll();
> -#endif /* SUSPEND_USES_PMU */
>  }
>  
>  /* Interrupt data could be the result data from an ADB cmd */
> @@ -1743,14 +1725,10 @@ pmu_present(void)
>   * PCI devices which may get powered off when we sleep.
>   */
>  static struct pci_save {
> -#ifndef HACKED_PCI_SAVE
>  	u16	command;
>  	u16	cache_lat;
>  	u16	intr;
>  	u32	rom_address;
> -#else
> -	u32	config[16];
> -#endif	
>  } *pbook_pci_saves;
>  static int pbook_npci_saves;
>  
> @@ -1796,16 +1774,10 @@ pbook_pci_save(void)
>  			pci_dev_put(pd);
>  			return;
>  		}
> -#ifndef HACKED_PCI_SAVE
>  		pci_read_config_word(pd, PCI_COMMAND, &ps->command);
>  		pci_read_config_word(pd, PCI_CACHE_LINE_SIZE, &ps->cache_lat);
>  		pci_read_config_word(pd, PCI_INTERRUPT_LINE, &ps->intr);
>  		pci_read_config_dword(pd, PCI_ROM_ADDRESS, &ps->rom_address);
> -#else
> -		int i;
> -		for (i=1;i<16;i++)
> -			pci_read_config_dword(pd, i<<4, &ps->config[i]);
> -#endif
>  		++ps;
>  	}
>  }
> @@ -1824,17 +1796,6 @@ pbook_pci_restore(void)
>  	int j;
>  
>  	while ((pd = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, pd)) != NULL) {
> -#ifdef HACKED_PCI_SAVE
> -		int i;
> -		if (npci-- == 0) {
> -			pci_dev_put(pd);
> -			return;
> -		}
> -		ps++;
> -		for (i=2;i<16;i++)
> -			pci_write_config_dword(pd, i<<4, ps->config[i]);
> -		pci_write_config_dword(pd, 4, ps->config[1]);
> -#else
>  		if (npci-- == 0)
>  			return;
>  		ps++;
> @@ -1858,7 +1819,6 @@ pbook_pci_restore(void)
>  			pci_write_config_word(pd, PCI_COMMAND, ps->command);
>  			break;
>  		}
> -#endif	
>  	}
>  }
>  
>